| Management of air tool / oil pulse tool |
| ●Torque Tester DI-1M-IP series |
| Management of an oil pulse tool etc. High precisionlightweight small. The best for everyday check of an oil pulse tool. Since it is highly precise, the bolting tool of a bolt is manageable on the optimal conditions. Since it is lightweightsmall, it can install in a work line. Convenient for the scheduled inspection of a tool It is brightreadable at an LED display. The high luminosity (light emitting diode) LED can be adopted as a display element, and measured value can be read also in a dark place It can use also for a torque wrench. It can be used also for management of a torque wrench angle nut runner besides an oil pulse wrench. The main features □Blow counter. The total number of blows within fixed timetorque measured value are displayed. □ Stable measurement can be performed in inspection of a pre set torque wrench in peak down mode. □RS232C Output. It connects with data printing (printer use corresponding to RS232C),a personal computer,data can be saved easily.(Taking-in soft use of exclusive use) □ It is the highly efficient measuring instrument which carried the auto-power-off function, the auto clear function, etc. |
| Specification | ＤＩ-１Ｍ-ＩＰ５０ | ＤＩ-１Ｍ-ＩＰ２００ | ＤＩ-１Ｍ-ＩＰ５００ | |
| Measuring range (at the time of Track) | 0.30～50 N･m | 3.0～200 N･m | 3.0～500 N･m | |
| Peak down Operating range | 0.70N･m～, 7.0kgf・cm/ lbf・in～ | 7.0N･m～, 70kgf・cm/ lbf・in～ | ||
| Accuracy | ±0.5％（F/S）(499 or less digit±3digit) | |||
| Display | The 4 figures digital display of LED | |||
| The measurement direction | CW-CCW (rightleft) | |||
| Measuring mode | P-P Peak | Peak load value hold | ||
| T-R Track | Indication of real time torque value. | |||
| P-D Peak down | Indication peak down pointhold. | |||
| Display zero clearance | Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance | |||
| Blow | Measurement range | Zero to 99 blow | ||
| Measurement time | 0.1 - 9.9 seconds | |||
| Data output | RS232C conformity (baud rate 9600) | |||
| Power supply | Ni-Cd chargeable battery 1.2V×5cells 700mAh | |||
| Auto power save | 5 minutes no use, automatically switch off. | |||
| Charging time | From empty - less than 6hours | |||
| Continunous working time | 8 hours | |||
| Meter part Weight | About 600g | |||
| Detection part Weight | about 600g | about 1kg | about 2.5kg | |
| Meter part Outside size | 146(W)×115(D)×48(H) （It does not contain by the projection part） | |||
| Code length | Standard 1m (there are automatic machines no less than 4m as an option.) | |||
| Accessories | Attache case | ― | ― | |
| AC/DC adaptor (Please choose AC adaptor out of 120V,230V.) | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| Detection machine size figure | Detection machine outside figure | |||
| Form | ＩＰ５０ | ＩＰ２００ | ＩＰ５００ | |
| Ａ | Φ50 | Φ60 | Φ80 | |
| Ｂ | 63 | 73 | 99 | |
| Ｃ | 10 | 10 | 15.5 | |
| Ｄ | Φ90 | Φ110 | Φ140 | |
| Ｅ | Φ74 | Φ90 | Φ116 | |
| Ｆ(Three division) | Φ6.3 | Φ8.3 | Φ10.5 | |
| Ｇ (Socket intuition affinity) | 9.5ｓｑ | 12.7ｓｑ | 19ｓｑ | |
| Weight | 632g | 1.8kg | 3kg | |
