該Protectoseal系列號8540H,*終的行壓力/真空排氣保護,適用于使用在壓力和真空救災是必需的。在發(fā)泄住房允許在坦克的空氣和蒸氣逸出量在正常呼吸,然后把托盤。打開和關閉托盤只允許攝入量或出口救濟必要保持在允許的工作壓力,避免損壞水箱。蒸發(fā)損失,降低了成本。
產品規(guī)格表 - PDF文件(西班牙語|中文).
安裝與維修指南的PDF(西班牙語|中文).
尺寸2“(DN50的)到12”(DN的300)。
通風口直接到大氣中。
設置達到負重。
較高的壓力/真空設置可用。
ProFlow ®尺寸/選型軟件。
磚利,配屋電影“氣墊座位”.
低泄漏托盤設計 - 。認證測試報告。
非金屬(熱塑性樹脂及玻璃鋼)型號。
“蒸汽護套”可用。
純科技®設計的高純度的應用。
與歐洲ATEX 94/9/EC指令符合
END-OF-LINE PRESSURE / VACUUM CONSERVATION VENT
Series No. 8540H
The Protectoseal Series No. 8540H, End-of-Line Pressure / Vacuum Conservation Vent, is intended for use where both pressure and vacuum relief are required. The pallets in the vent housing allow intake of air and escape of vapors as the tank normally breathes in and out. Pallets open and close to permit only that intake or outlet relief necessary to remain within permissible working pressures and avoid damage to the tank. Reduces cost evaporation losses.
- Product Specification Sheet - PDF ( Spanish | Chinese )
- Installation & Maintenance Instructions -PDF ( Spanish | Chinese )
- Sizes 2" (DN 50) through 12" (DN 300)
- Vents directly to atmosphere
- Settings achieved by weight loading
- Higher pressure / vacuum settings available
- ProFlow® Sizing/Selection Software
- Patented, FEP Film "Air-Cushioned Seating"
- Low-leak pallet design - certified test reports
- Non-metallic (Thermoplastic Resin & FRP) construction available
- "Steam-Jacketing" available
- Pure-Tech® Design- high purity applications
- Conforms with European ATEX Directive 94/9/EC