Protectoseal系列號18540，管道客場壓力/真空保護通風，目的是提供應用，需要將有害蒸氣管道走，而不是釋放到大氣壓力和真空救濟。在發泄住房允許在坦克的空氣和蒸氣逸出量在正常呼吸，然后把托盤。打開和關閉托盤只允許攝入量或出口救濟必要保持在允許的工作壓力，避免油箱損壞。緩解蒸氣會通過管道法蘭連接了一個尺寸比進口提供更大的流動能力更大。
產品規格表 - PDF格式。（西班牙語|中文）.
安裝及維修指南 - PDF格式。（西班牙語|中文）.
尺寸2“（DN50的）到12”（DN的300）。
連進，出口車型也可提供。
設置達到負重。
減少昂貴的蒸發損失。
非金屬（熱塑性樹脂及玻璃鋼）型號。
較高的壓力/真空設置可用。
ProFlow ®尺寸/選型軟件。
純科技®設計的高純度的應用。
磚利，配屋電影“氣墊座位”.
低泄漏托盤設計 - 。認證測試報告。
“蒸汽護套”可用。
與歐洲ATEX 94/9/EC指令符合。
PIPE-AWAY PRESSURE / VACUUM CONSERVATION VENT
Series No. 18540
Protectoseal Series No. 18540, Pipe-Away Pressure / Vacuum Conservation Vent, is designed to provide pressure and vacuum relief in applications that require hazardous vapors to be piped away, rather than released into the atmosphere. The pallets in the vent housing allow intake of air and escape of vapors as the tank normally breathes in and out. Pallets open and close to permit only that intake or outlet relief necessary to remain within permissible working pressures and avoid tank damage. Relieving vapors may be piped away through a flanged connection one size larger than inlet providing greater flow capabilities.
- Product Specification Sheet - PDF ( Spanish | Chinese )
- Installation & Maintenance Instructions - PDF ( Spanish | Chinese )
- Sizes 2" (DN 50) through 12" (DN 300)
- Even inlet-outlet models also available
- Settings achieved by weight loading
- Reduces costly evaporation losses
- Non-metallic (Thermoplastic Resin & FRP) construction available
- Higher pressure / vacuum settings available
- ProFlow® Sizing/Selection Software
- Pure-Tech® Design- high purity applications
- Patented, FEP Film "Air-Cushioned Seating"
- Low-leak pallet design - certified test reports
- "Steam-Jacketing" available
- Conforms with European ATEX Directive 94/9/EC
