HAVER UFA - Ultrasonic Frequency Variation for Test Sieves
UFA / AGS35-100
The HAVER UFA is especially designed for the sieving of powders at critical particle size cuts of ≤ 300 micron. The screen is excited by means of ultrasonic wave at continuously varying frequency.
德國Haver UFA變頻超聲篩分系統簡介:
UFA 變頻超聲篩分系統其原理是通過超聲波進行振動篩分,該系統是為粒徑≤300um的臨界顆粒粉末而特別設計的。這種輔助篩分方式使得整個篩分過程能夠很快完成,顯著縮短篩分時間。
德國Haver UFA變頻超聲篩分系統特點:
*由于振蕩頻率被*覆蓋,振動裝置或篩網上無“熱點”。
*避免溫度敏感粉末結塊,同時不減少通量。
*所需清潔間隔周期更長。
*篩網以及相關機械裝置使用壽命更長。
*無需調整超聲部件,目前的篩分儀改造后都可方便的安裝ARTECH超聲傳導系統。
*變頻器使用一臺發生器激發多個篩網,減少了投入。
*變頻器激發結構中包括篩網的各個組件。超聲聲場均勻分布于整個網布表面,從而實現了高通量。
*無相位調節的強制振蕩確保安全,機器無共振地持續震蕩,超聲發生器不會超載。
*高頻電纜和換能器安裝位置在粉體流路以外,換能器上不會結塊。
*進行ATEX認證,在篩分系統內可達ATEX Zone20級,在篩分系統外可達ATEX Zone22級。
Your advantages at a glance
Increase of throughput of bulk materials ≤ 300 μm
Clogging tendency is reduced and disintegration of agglomerated material is promoted
Sieving performance is increased and sieving times shortened
Permanent sieve mesh cleaning effect with less mechanical wear on the screens
Several test sieves can be agitated at the same time with a single generator
*提高≤300μm塊狀材料的通量
*減少堵塞傾向,促進團聚材料的解體
*提高篩分性能,縮短篩分時間
**性篩網清洗效果,篩網機械磨損小
*幾個試驗篩可同時用一臺超聲波發生器
德國Haver UFA變頻超聲篩分系統技術參數:
Clamping ring 夾環 | ø 200 mm, 203 mm, 300 mm, 400 mm |
Converter 轉換器 | Connector cable indluded |
Analogue generator 模擬發生器 | AGS35-100 |
Digital generator 數字發生器 | DGS35-50-T |
德國Haver UFA變頻超聲篩分系統訂購信息:
System consisting of: | 貨號 |
analogue generator AGS35-100-230. 50 W | 900359 |
converter with connecting cable | 900290 |
clamping ring for test sieves Ø 200 mm | 900358 |
Ø 203 mm | 900391 |
Ø 300 mm | 900385 |
Ø 305 mm | 900392 |
Ø 315 mm | 900393 |
Ø 350 mm | 900381 |
Ø 400 mm | 900394 |