當前位置：深圳市森瑟科技發(fā)展有限公司>>技術文章>>IEPE傳感器恒流源驅動電路
Circuit Schematic for IEPE Sensors
Integrated Electronic Piezo Electric (IEPE) type sensors require a constant current source for proper operation. Various methods can be used to provide constant current. The circuit below is recommended to provide 4 mA constant current at room temperature for powering IEPE sensors. The capacitor at “Sensor +" AC coupled the output signal, blocking the DC voltage. The current temperature coefficient is about to 0.25%/deg C.
T1 ａnd T2 can be most of PNP type transistor, such as 3906, 9012 etc.
R1, 165 ohm, sets the constant current level, Decreasing the value will increase the current, and vice versa.
R2, 51k ohm typical. Precision is not important.
請輸入賬號
請輸入密碼
以上信息由企業(yè)自行提供，信息內容的真實性、準確性和合法性由相關企業(yè)負責，儀表網對此不承擔任何保證責任。
溫馨提示：為規(guī)避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
