(以標準零點為基準調校量程,接液部分材質代碼“S”3-inch平法蘭型和4-inch凸法蘭型)
(包括線性、滯后性和重復性)
±0.075%
若量程小于× ?。?/font>
±[0.025+0.05X]----%量程
膜盒 XkPa{inH2O}
M 10{40}
H 100{400}
總影響量/28℃變化
環境溫度影響
膜盒影響
M ±[0.224%量程+0.056%量程上限
H ±[0.14%量程+0.028%量程上限
靜壓影響
變化的總影響量
±[0.028%量程+0.007%量程上限]/0.69MPa{100psi}
零點影響(可通過在線校正)
±0.007%量程上限/0.69MPa{100psi}
穩定性
±0.1%量程上限/12個月
電源影響
±0.005%/V(21.6V~32VDC,350Ω)
量程/范圍 | KPa | inHO (/D1) | mbar (/D2) | mmHO2 (/D4) | |
M | 量程 | 1~100 | 4~400 | 10~1000 | 100~1000 |
范圍 | -100~100 | -400~400 | -1000~100 | -10000~10000 | |
H | 量程 | 5~500 | 20~2000 | 50~5000 | 0.05~5kgf/cm |
范圍 | -500~500 | -2000~2000 | -5000~500 | -5~5kgf/cm2 |
在膜盒量程的上下限范圍內,零點可任意調校
外部調零
在測量范圍內連續可調,分辨率為0.01%,用表頭上的測量范圍設定開關可調校量程
安裝位置影響
與膜片面平行方向的安裝位置變化不會造成零漂影響,若安裝位置與膜片面超過90°的變化,在0.4kPa
2
{1.6inHO}范圍內的零漂可通過調零校正
法蘭安裝式差壓變送器的型號和規格代碼表
MH-E210A[法蘭尺寸:3-inch(80mm,DN80)
型號 | 規格代碼 | 說明 |
MH-E210A | | 法蘭安裝式差壓變送器(平膜片型) |
輸出信號 | -E············ | 4~20mA,HART協議數字通訊(參見GS1C22T1-CY) |
測量量程 (膜盒) | L············· M············· H············· V·············· | 1~100KPa{100~10000mmHO}2 5~500kPa{0.05~5kgf/cm2} |
高壓側 (法蘭側)接液部分材質 | S············· H············ M············· T············· A············· D············· B············· | [膜片][其它] SUS316LSUS316 哈氏合金C-276哈氏合金C 鉭(鉭 |
法蘭規格 | 0············· 1············· 2············· 3············· 4············· 5············· | JIS10K JIS20KANSI150 ANSI300 JPI150 JPI300 DINPN10/16 DINPN25/40 GBPN10/16(GB/T9115.1-2000) |
法蘭尺寸/材質 | A············· B············· C············· | 3-inch(80mm,DN80)/S25C 3-inch(80mm,DN80)/SUS304 3-inch(80mm,DN80)/SUS316 |
低壓側管道連接 | -2············ -3············ -6············ -7············ -8············ -9············ | 無管道連接件(Rcl/4內螺紋在容室法蘭上) 帶Rcl/4內螺紋的過程接頭帶Rcl/2內螺紋的過程接頭 帶1/4NPT內螺紋的過程接頭帶1/2NPT內螺紋的過程 |
法蘭螺栓材質 | 0············· 2············· 3············· 4············· | SCM435 SUS630 SUS660 |
安裝 | D············ E············· | 水平配管連接,左邊高壓 |
接線口 | A············· B············· C············· D············· N············· | G1/2內螺紋,1處接線口 1/2NPT內螺紋,2處接線口Pg13.5內螺紋,2處接線口 M20內螺紋,2處接線口 G1/2內螺紋,2處接線口,帶一個盲塞 1/2NPT內螺紋,兩個電氣接口,一個盲塞Pg13.5內螺紋,兩個電氣接口,一個 |
顯示表頭 | A············· B············· C············· D············· N············· |
公司:http://www.minghuiyibiao.com/
http://www.jhminghui.com/