主要特點

• 較低的總電容性負載盡量減少對電路的侵入

• 20 k? 輸入電阻

• 7.5 Vp-p動態范圍支持范圍廣泛的邏輯系列

• 附加機制多種多樣，包括高密度 D-Max®、Mictor、方針和飛腳。

應用

• 數字硬件驗證和調試

• 監控、測量和優化數字硬件性能

• 嵌入式軟件集成、調試和驗證

用于實時數字系統分析的*探頭解決方案 – P5900 系列探頭

測試和測量解決方案如果不帶探測且未考慮其對于系統和測量時間的影響，則不算完整。 憑借行業的探頭加載，P5900 系列邏輯分析儀探頭保護信號的完整性，從而盡量減小對于設計的影響。 P5900 系列邏輯分析儀探頭在與 TLA6400 系列邏輯分析儀結合使用時，可以經濟的價格實現精密的邏輯分析。 請從各種附加機制中進行選擇，包括高密度 D-Max®、Mictor 和通用探頭。

The main features

The lower total capacitive load minimizes the intrusion into the circuit

20 k ? input resistance

7.5 vp-p dynamic range supports a wide range of logic series

Additional mechanisms are diverse, including high density D - Max ®, Mictor, policy and fly feet.

application

Digital hardware validation and debugging

Monitor, measure and optimize digital hardware performance

Embedded software integration, debugging and validation

Advanced probe solution for real-time digital system analysis - P5900 series probe

A test and measurement solution is incomplete without a probe and without considering its impact on the system and measurement time. With the lowest probe load in the industry, the P5900 series logic analyzer probes protect signal integrity to minimize design impact. The probe of P5900 series logic analyzer can be used in combination with TLA6400 series logic analyzer to achieve precise logic analysis at an economical price. Please choose from a variety of additional mechanism, including high density D - Max ®, Mictor and general probe.