| 型號 | 模擬帶寬 | 采樣率 | 記錄長度 | 模擬通道 | 數字通道數 | 頻譜分析儀 | 函數發生器輸出 |
|---|---|---|---|---|---|---|---|
| MDO4024C | 200 MHz | 2.5 GS/s | 20 M 點 | 4 | 16（選配） | 6 GHz | 1 條（可選） |
| MDO4034C | 350 MHz | 2.5 GS/s | 20 M 點 | 4 | 16（選配） | 6 GHz | 1 條（可選） |
| MDO4054C | 500 MHz | 2.5 GS/s | 20 M 點 | 4 | 16（選配） | 6 GHz | 1 條（可選） |
| MDO4104C | 1 GHz | 2.5 - 5 GS/s | 20 M 點 | 4 | 16（選配） | 6 GHz | 1 條（可選） |
主要性能指標
1.示波器
4條模擬通道
1GHz、500MHz、350MHz和200MHz帶寬型號
帶寬可升級（達 1GHz）
達 5GS/s 采樣率
所有通道上20M記錄長度
> 340,000wfm/s 的波形捕獲速率
標配無源電壓探頭，3.9pF 電容負載，1GHz 或 500MHz模擬帶寬
2.頻譜分析儀（選配）
頻率范圍9kHz-3GHz或9KHz-6GHz
超寬捕獲帶寬 ≥1GHz
頻譜分析儀的時間同步捕獲功能，支持模擬采集和數字采集
頻率對時間、幅度對時間和相位對時間波形
3.任意函數發生器（選配）
13種預先定義的波形類型
50MHz波形生成功能
128k任意波形發生器記錄長度
250MS/s 任意波形發生器采樣率
4.邏輯分析儀（選配）
16條數字通道
所有通道上20M記錄長度
60.6ps 定時分辨率
5.協議分析儀（選配）
支持 I2C、SPI、RS-232/422/485/UART、USB 2.0、以太網、CAN、CAN FD、LIN、FlexRay、MIL-STD-1553、ARINC-429 和音頻標準等串行總線
6.數字電壓表/頻率計數器（產品注冊后免費提供）
4位 AC RMS、DC 和 AC+DC RMS 電壓測量
5位頻率測量
典型應用
1.嵌入式設計
在混合信號嵌入式系統上執行系統級調試，迅速發現和解決問題，包括當前見的串行總線和無線技術。
2.功率設計
使用自動功率質量、開關損耗、諧波、紋波、調制和安全作業區測量，在經濟的解決方案中提供泛的功率探頭選擇范圍，進行可靠的、可重復的電壓、電流和功率測量。
3.EMI調試
確定哪些時域信號可能導致不想要的EMI，迅速追蹤嵌入式系統中的EMI來源。實時查看時域信號對系統EMI輻射的影響。
4.無線調試
在使用藍牙、802.11 WiFi、ZigBee或某些其他無線技術時，MDO4000C可以查看整個系統，包括模擬信號、數字信號和RF信號，而且在時間上同步，了解其真實特點。在一次捕獲中，捕獲超寬頻段，查看多種無線技術之間的交互，或查看現代標準（如802.11/ad）中的整個寬帶頻率范圍。
5.教育
管理工作臺上的多臺儀器可能會非常麻煩。MDO4000C把六種儀器整合到一臺儀器中，不需要管理多臺儀器。集成頻譜分析儀可以講授高級無線技術課程，同時使要求的投資達到最小。全面升級能力可以在需求變化時或在預算允許時再增加功能。
6.制造測試和調試
規格和空間限制可能會給車間帶來巨大影響。無二的六合一MDO4000C把多臺儀器整合到一臺小型儀器中，限度地減少了機架或工作臺空間。整合降低了在制造測試或調試站中使用多種不同儀器的相關成本。
Main performance index
1. The oscilloscope
4 analog channels
Models of 1 GHz, 500 MHz, 350 MHz and 200 MHz bandwidth
Bandwidth upgradable (up to 1 GHz)
Up to 5 GS/s sampling rate
20 M record length on all channels
> 340,000 WFM /s maximum waveform capture rate
Standard passive voltage probe, 3.9 pF capacitor load, 1 GHz or 500 MHz analog bandwidth
2. Spectrum analyzer (optional)
The frequency range is 9 khz-3 GHz or 9 khz-6 GHz
The super wide capture bandwidth is greater than or equal to 1 GHz
The time synchronization acquisition function of the spectrum analyzer supports analog and digital acquisition
Frequency - to - time, amplitude - to - time and phase - to - time waveforms
3. Arbitrary function generator (optional)
13 pre-defined waveform types
50 MHz waveform generation function
128 k arbitrary waveform generator recording length
Sampling rate of 250 MS/s arbitrary waveform generator
4. Logical analyzer (optional)
16 digital channels
20 M record length on all channels
60.6 ps timing resolution
5. Protocol analyzer (optional)
Support I2C, SPI, rs-232/422/485 /UART, USB 2.0, Ethernet, CAN, CAN FD, LIN, FlexRay, mil-std-1553, arinc-429 and audio standard serial bus
6. Digital voltmeter/frequency counter (free after registration)
Voltage measurement of 4-bit AC RMS, DC and AC+DC RMS
5-bit frequency measurement
Typical applications
Embedded design
Perform system-level debugging on mixed signal embedded systems to quickly identify and solve problems, including the most common serial bus and wireless technologies.
Power design
Using automatic power quality, switch loss, harmonic, ripple, modulation and security areas measured, in the economic solutions to provide the most extensive power probe choices, reliable and repeatable voltage, current and power measurement.
EMI debugging
Determine which time-domain signals may cause unwanted EMI and quickly track EMI sources in embedded systems. Real-time view of the influence of time-domain signals on EMI radiation of the system.
Wireless debugging
In the use of bluetooth, WiFi, ZigBee 802.11, or some other wireless technology, MDO4000C can view the entire system, including the analog signal and digital signal and RF signals, and synchronization in time, to understａnd its true features. In a single capture, the uwb is captured, the interaction between multiple wireless technologies is viewed, or the entire broadbａnd frequency range in modern standards, such as 802.11/ AD.
education
Managing multiple instruments on the workbench can be very troublesome. The MDO4000C integrates six instruments into one instrument without the need to manage multiple instruments. Integrated spectrum analyzer can teach advanced wireless technology courses while minimizing required investment. Comprehensive upgrade capabilities can be added when requirements change or when budgets allow.
Manufacturing testing and commissioning
Specifications and space constraints can have a significant impact on the workshop. The one-of-a-kind hexadecimal MDO4000C integrates multiple instruments into a small instrument to minimize the shelf or workbench space. Integration reduces the relative cost of using a variety of different instruments in a manufacturing test or commissioning station.
