主要特點和優點
主要性能指標
線性穩壓電源
高達72 V 輸出電壓
0.03% 基本電壓精度
0.05% 基本電流 精度
p-p 紋波和噪聲
提供的功能和特點
在明亮的顯示器上同時顯示輸出電壓、電流和極限
可以調節過壓保護
通過數字鍵盤直接輸入?yún)?shù)
最多存儲40 種用戶自定義設置
列表模式，逐步通過存儲的設置，執行測試順序
遠程傳感，補償引線電阻
連接
后面輸出和觸發/ 狀態線路
后面板上提供了USB 設備端口，快速連接PC，進行遠程編 程
包括National Instrument LabVIEW SignalExpressTM TE 限 定版軟件，連通測試平臺
寬電流和電壓范圍及靈活的功能使得PWS4000 系列電源成為 多功能工作臺儀器。由于0.03% 基本電壓精度和0.05% 基本 電流精度，您可以對電源輸出值樹立信心。遠程傳感功能消除 了引線中電壓下跌造成的影響，p-p的噪聲進一步保證了 準確的功率測量結果。列表模式和遠程編程使用的USB端口加 快了復雜測試的開發速度。PWS4000 系列電源迅速準確地為 您的應用提供了所需的處理能力。
全面控制輸出
PWS4000 系列所有型號都有一個過壓保護電路，在輸出電壓 因任何原因超過用戶門，會降低輸出電壓。PWS4000 系列還包括一種設置，允許防止電壓因意外調節超出極 限。
設置相應電流極限對防止被測設備損壞至關重要。通過 PWS4000 數字鍵盤，您可以在開始測試前，迅速準確地 電流極限。顯示屏上一直可以看到電流極限，讓您知道這種重 要設置。用戶自定義口令可以鎖住前面板，防止在關鍵測試過 程中發生不想要的調節。
專業設計，讓您的工作更輕松
PWS4000 系列電源采用專門設計，使用簡便，提供了您預期 泰克提供的熟悉操作。
直觀操作
旋轉旋鈕及用戶可選擇步長，可以簡便地檢查電路對電壓或電 流變化的響應。直接輸入數字鍵盤簡化了設置精確電壓和電流 值的工作。
明亮的顯示器
明亮的真空熒光顯示器在遠處、在斜角、或在光線暗時都能看 清屏幕上的內容。用戶一直可以看清儀表讀數和極限，您不需 要按按鈕，就可以看到極限值。
設置存儲器
為在重復測試時節約時間，您只需按Save 按鈕，就可以把儀 器設置保存在40 個內存位置的其中一個位置上。每次在您想 調用設置時，您只需按Recall按鈕，選擇所需的設置就可以了。
加快復雜的測試開發速度
內置列表模式允許為測試自定義的電壓和電流步長順序。 可以定義最多7個列表，每個列表可以有最多80個步長。列表 可以配置成在外部觸發或按前面板按鈕時逐步通過順序。也可 以每個步長的時長，儀器將自動逐步通過順序。如需提高 靈活性，可以使用后面板上的USB設備端口，簡便地把電源連 接到PC 上，實現遠程編程。
連通工作臺，實現智能調試
您可以使用的編程環境，通過USBTMC 標準設備端口控 制PWS4000，還可以使用專用的泰克版National Instrument LabVIEW SignalExpressTM軟件，迅速獲得結果。每臺 PWS4000系列電源都標配免費的限定版SignalExpress軟件， 提供了基本儀器控制、數據記錄和分析功能。選配的專業版軟 件提供了200種內置功能，提供了更多的信號處理、高級分析、 掃描、極限測試和用戶自定義步驟功能。
Main features and advantages
Key performance indicators
Linear regulated power supply
Up to 72 V output voltage
Accuracy of basic voltage
Accuracy of basic current
P-p ripple and noise
Functions and features provided
The output voltage, current and limit are displayed on a bright display
Overvoltage protection can be adjusted
Input parameters directly through the numeric keypad
Up to 40 user-defined Settings are stored
List mode, step through the stored Settings, execute the test sequence
Remote sensing, compensating lead resistance
The connection
Later output and trigger/state lines
A USB device port is provided on the back panel for quick PC connection and remote programming
Including National Instrument LabVIEW SignalExpressTM TE limited edition software, connectivity test platform
Wide current and voltage ranges and flexible features make the PWS4000 series power supply a versatile bench instrument. You can build confidence in the power supply output due to the 0.03% basic voltage accuracy and 0.05% basic current accuracy. The remote sensing function eliminates the impact of voltage drop in the lead, and the p-p noise further ensures accurate power measurement results. The list mode and the USB port used for remote programming speed up the development of complex tests. The PWS4000 series power supply quickly and accurately provides your application with the processing power it needs.
Total control output
All models of the PWS4000 series have an overvoltage protection circuit that reduces the output voltage when the output voltage exceeds the user-specified threshold for any reason. The PWS4000 series also includes a setting that allows accidental voltage regulation to be prevented from exceeding a specified limit.
It is very important to set the corresponding current limit to prevent the damage of the equipment under test. With the PWS4000 numeric keypad, you can quickly and accurately specify the current limit before starting the test. The current limit can always be seen on the display screen, letting you know this important setting. User-defined passwords lock the front panel to prevent unwanted adjustments during critical test runs.
Professional design, make your work easier
The PWS4000 series power supply is specially designed and easy to use, providing the familiar operation you expect from tektronix.
Intuitive operation
By rotating the knob and selecting the step size, the response of the circuit to voltage or current changes can be easily checked. The direct input numeric keypad simplifies setting precise voltage and current values.
Bright display
Bright vacuum fluorescence displays can see clearly at a distance, at a bevel Angle, or in low light. The user can always see the meter reading and limit, you do not need to press the button, you can see the limit value.
Setup memory
To Save time during repeated tests, simply press the Save button to Save the meter Settings in one of the 40 memory locations. Each time you want to call the Settings, you just press the Recall button to select the Settings you need.
Speed up complex test development
The built-in list mode allows you to specify a custom order of voltage and current steps for your tests. You can define up to seven lists, each with up to 80 steps. Lists can be configured to step through the sequence when triggered externally or when the front panel button is pressed. The length of each step can also be specified, and the instrument will automatically step through the sequence. To increase flexibility, you can use the USB device port on the back panel to simply connect the power supply to a PC for remote programming.
Connect the workbench to realize intelligent debugging
You can use the preferred programming environment to control PWS4000 through the standard device port of USBTMC, and you can also use the special National Instrument version LabVIEW SignalExpressTM software to quickly get the results. Each PWS4000 series power supply is standard with free SignalExpress software, which provides basic instrument control, data recording and analysis functions. The optional pro software comes with 200 built-in features for more signal processing, advanced analysis, scanning, limit testing, and user-defined steps.
