DF-TV7-T多光譜火焰探測器
DF-TV7-T多光譜火焰探測器是使用三波段的多光譜紅外火焰探測器。DF-TV7-3IR響應烴類火災，是惡劣環境或者煙霧火災探測環境的正確選擇
1，IR3波段探測原理
2，烴類火焰類型
3，探測范圍：65-80米
4，響應時間從3秒到20秒可調節
5，質量保證3年
特性:
- Excellent false alarm immunity
- Wide field of view
- Through lens optical check
- 4-20 mA and relay ouptuts as standard
- 4-20 mA Hart option
- SIL 3
- 總覽:
-
The Simtronics DF-TV7–T is a multi-spectrum infrared flame detector using three wavelengths. DF-TV7-3IR responds to hydrocarbon fires and is the right choice for operation in dirty environments or for detection of smoky fires.
The MultiFlame DF-TV7–T is designed to respond to unwanted hydrocarbon fires, whilst maintaining a high degree of false alarm immunity. The device offers a wide range of output options, as standard and is suitable for use in SIL 3 applications. The unit may be interfaced directly with a wide range of fire panels, controllers and PLC’s etc.
The unit is fully configurable using a wireless hand-held terminal (TLU) or optionally via HART (R) giving true flexibility to the installer. Time delays, sensitivity and output configuration are all set up via the TLU; a hazardous area approved hand-held unit.
Wireless testing of the optical and output circuits are also possible using the TLU.
技術參數:
GENERAL Type Flame detector Product Simtronics MultiFlame 3xIR Product code Standard range: DF-TV7-XTA0-*; Long range: DF-TV7-XTB0-* Manufacturer Simtronics FLAME DETECTOR Type / Principle Optical flame detection Technology Multispectrum Infrared flame detector Fire Types Hydrocarbon fires Modularity Replaceable sensor cartridge PERFORMANCE Cone of vision 104° horizontal, 82° vertical at 50% of the axis dist., up to 120° Horiz. for shorter coverage Response time 3.0 sec with no temporization. Factory setting: delay 5 sec gives 6.0 sec resp. time.Adjustable delay 0 - 20 sec Detection range: - n-heptane (1 sq ft fire) Standard: 40m (130ft). Long range: 80m (260ft) - Gasoline (1 sq ft fire) Standard: 33 m (110 ft). Long range: 65 m (210 ft) ELECTRICAL Power supply 24V DC, range (18 - 28V DC) Power consumption 70 mA normal; 155 mA during self test Cable entry 2x M20, one entry with Exd plug – 2 additional as an option Junction box “No-touch” field cabling”, detector replaceable without opening cable glands Connection 0.3 mm2 (22 AWG) - 1.5 mm2 (16 AWG), 3 or 4 wires Analogue output signal 0-20mA, source, max. load impedance 700?. Fault signalling Diagnosis signalling in the 2.0 - 3.4mA range Relays 2 configurable relays for fire and fault Maintenance interface Wireless (IR) handheld terminal for configuration, test and diagnosis ENVIRONMENT Storage -40°C to +70°C (-40°F to 158°F) Operation -20°C to +60°C (-4°F to 140°F) Humidity 95% RH (non-condensing) Ingress IP66 RFI/EMI Complies with EN 50130-4 HOUSING EX Classification Ex d II C T6 Gb Material Epoxy coated aluminium or Stainless steel (Specify variant) Weight Aluminium: 3.3 Kg (7.3 lbs), Stainless steel: 7.4 kg (16.3 lbs) Dimensions 233L x 118D x 184H (mm), 8.78L x 4.65D x 7.25H (inches) APPROVALS ATEX Certificate DM LCIE 03 ATEX 6263 IECEx Certificate DM IECEx LCI09.0018 SIL Certificate Suitable for use in SIL3 systems MarED Certificate 23160/A0 EC + SMS.MED.D/81256/A.0 ACCESSORIES TLU600 Infrared remote control unit LT15 Test lamp (EX flame simulation torch) AS008-450 Sunshade AS030-A/X Multi-position angle wall mounting AS035-A/X Pivot ball mounting bracket AS040 Sun visor (long, open) AS041 Sun visor (long, narrow)
文檔:
Product Sheet 380.04 KB
Operating Manual1.55 MB
Operating Manual LT15 (Flame Detector Test Lamp)346.03 KB
證書:
IECEx Certification170.21 KB
HART Certification47.4 KB
SIL 3 Certificate103.46 KB
應用:
- Refineries
- Drilling and Production Platforms
- Fuel Loading Facilites
- Compressor Stations
- LNG/LPG Processing and Storage
- Gas Turbines
- Chemical Plants
- Aircraft Hangers
-
