上海榮計達儀器科技有限公司經營水泥實驗儀器、混凝土實驗儀器、公路土工實驗儀器、干粉砂漿保溫砂漿實驗儀器、瀝青防水材料實驗儀器、油漆涂料實驗儀器、無損檢測等實驗儀器。經營水泥實驗儀器、混凝土實驗儀器、公路土工實驗儀器、干粉砂漿保溫砂漿實驗儀器、瀝青防水材料實驗儀器、油漆涂料實驗儀器、無損檢測等實驗儀器。公司產品憑借過硬的質量、完善的售后服務、合理的價格各大院校、檢測單位、建材企業、工程建設單位。在消費者當中享有較高的地位和良好的口碑，用戶遍布國內近三十個省市、自治區，并遠銷國外，與用戶建立了長期穩定的合作關系。公司實力雄厚，重信用、守合同。有健全的管理制度和完善健全的質量管理體系。并有反應迅速、服務周到的售后服務系統。我們將不懈努力、一如既往以優異的品質為客戶服務。

Shanghai Rongjida Instrument Technology Co Ltd. specializes in operating laboratory equipment such as cement experimental instruments, concrete experimental instruments, highway geotechnical experimental instruments, dry mortar mortar thermal insulation mortar experimental instruments, asphalt waterproof materials experimental instruments, paint coating experimental instruments, non-destructive testing. Specializing in the operation of cement experimental instruments, concrete experimental instruments, highway geotechnical experimental instruments, dry mortar mortar thermal insulation mortar experimental equipment, asphalt waterproof material experimental equipment, paint coating experimental equipment, non-destructive testing and other experimental instruments. The company's products are sold well in universities, testing units, building materials companies and engineering construction units with excellent quality, perfect after-sales service and reasonable prices. It enjoys a high status and good reputation among consumers. The users are located in nearly 30 provinces, municipalities and autonomous regions in China, and are exported to foreign countries. They have established long-term and stable cooperative relations with users. The company is strong in strength, re-credit and abide by the contract. Have a sound management system and a sound quality management system. And there is a quick response and considerate after-sales service system. We will make unremitting efforts and continue to serve our customers with excellent quality.

一、產品簡介：

容重測定儀用于現場測定原狀砂和礫質土的密度。主要由有底盤，灌砂漏斗，容重瓶，閥門組成。結構堅固耐久，采用不銹鋼材制成。

the product introduction:
The bulk density meter is used to determine the density of undisturbed sａnd and gravel soil on site. Mainly consists of a chassis, a sanding funnel, a bulk density bottle, and a valve. The structure is sturdy and durable, made of stainless steel.

二、技術參數：

★容砂瓶：4L；

★儀器尺寸：300 x 300 x 445mm （L x W x H）；

★重量：1.5Kg。

Second, technical parameters:
★ Sａnd bottle: 4L;
★ Instrument size: 300 x 300 x 445mm (L x W x H);
★ Weight: 1.5Kg.

三、使用說明：

★按灌砂法試驗中挖坑的步驟依據尺寸好試坑，稱試樣質量，測定試樣的含水率，

★向容砂瓶內注滿砂，關閥門，稱容砂瓶，漏斗和砂的總質量，準確至10 g。

★密度測定器倒置于挖好的空口上，打開閥門，使砂注入試坑。在注砂過程中不應震動。當砂注滿試坑時關閉閥門，稱容砂瓶、漏斗和余砂的總質量，準確至10 g，并計算注滿試坑所用的標準砂質量，

★試樣的密度（PO）＝取自試坑內試樣的質量（MP）÷(注滿試坑所用標準砂的質量（MS）÷標準砂的密度（PS）)。

★試樣的干密度（Pd）=｛取自試坑內試樣的質量（MP）÷（1＋0.01w1）｝/(注滿試坑 所用標準砂的質量（MS ÷標準砂的密度（PS）)。

灌砂法容重測定儀計算公式

V、P。V＝m3×VW　 P＝m5/V

　　 式中：V——測定器的容積，cm3　　　

m3——灌滿測定器所需水的質量（m2－m1）g

VW——不同溫度下每克水的體積，cm3/g

P——標準砂密度，g/ cm3

m5——充滿測定器所需砂的質量（m4－m1）g

Third, the instructions for use:
★ According to the steps of digging pits in the test of sａnd filling method, the test pit is based on the size, the mass of the sample is called, and the moisture content of the sample is determined.
★ Fill the sａnd bottle with sand, close the valve, call the sａnd bottle, the total mass of the funnel and sand, accurate to 10 g.
★ The density measuring device is placed on the excavated air opening, and the valve is opened to inject the sａnd into the test pit. It should not be shaken during the sａnd injection process. When the sａnd is filled with the test pit, the valve is closed, and the total mass of the flask, funnel and residual sａnd is said to be accurate to 10 g, and the standard sａnd quality used for filling the test pit is calculated.
★ Density of the sample (PO) = mass of the sample (MP) taken from the test pit (the mass of the standard sａnd used for filling the test pit (MS) the density of the standard sａnd (PS)).
★The dry density of the sample (Pd)={take the mass of the sample in the test pit (MP)÷(1+0.01w1)}/(the mass of the standard sａnd used for filling the test pit (MS ÷standard sａnd density (PS) ).
Sanding method bulk density measuring instrument calculation formula
V, P. V=m3×VW P=m5/V
Where: V——the volume of the measuring device, cm3
M3 - the mass of water required to fill the tester (m2-m1)g
VW - volume per gram of water at different temperatures, cm3/g
P——standard sａnd density, g/cm3
M5 - the mass of sａnd required to fill the tester (m4-m1)g