應用
（鉆, 銑, 磨, 雕刻）機床 | Applications | Drilling, Milling, Grinding, Engraving | |
外殼夾裝尺寸 | 45 mm | Clamping diameter | 45 mm |
馬達類型 | 無刷同步高速電機 | Motor system | Brushless DC motor (BLDC) |
轉速范圍 | 5,000 – 50,000 / 60,000* min-1 | Speed range | 5,000 - 50,000 / 60,000* rpm |
額定電壓 | 45 V | Voltage | 45 V |
電流 | zui大 16 A | Current | max. 16 A |
扭矩t | zui大 17 Ncm | Torque | max. 17 Ncm |
頻率 | 83 - 833 / 1,000* Hz | Frequency | 83 - 833 / 1,000* Hz |
功率 | zui大 1,050 W | Output power | max. 1,050 W |
重量 | 1,7 kg | Weight | 1.7 kg |
軸承 | 3 x 陶瓷軸承, 油脂潤滑 | Bearing system | 3 x Hybrid, lifetime lubrication |
保護等級 | IP 54 | Protection category | IP 54 |
電機保護 | PTC - 100 °C | Motor protection | PTC - 100°C |
安裝位置 |
| Working position |
|
負載方向 | 軸向 + 徑向 | Load direction | axial + radial |
錐面跳動 | 通常 1 µm | Run-out (taper) | typ. 1 µm |
*夾持范圍 | Ø 1.0 – 6.35 mm (incl. 1/8 + 1/4") | Chuck clamping range | Ø 1.0 - 6.35 mm (incl. 1/8 + 1/4") |
換刀方式 | 2 開口扳手 (SW 13 + 10) | Tool change | 2 open-end wrenches (13 + 10 mm) |
冷卻系統 | 外夾具冷卻 | Cooling system | Cooling via clamping bracket |
防水防塵措施 | 壓縮氣 0.5 – 0.8 bar (外管徑 Ø4 mm) | Protected against dirt | Sealing air 0.5 - 0.8 bar |
外殼材料 | 不銹鋼 | Housing material | Stainless steel |
*變頻器 | e@syDrive® 4426, TV 4506** | Inverter recommendation | e@syDrive® 4426, TV 4506** |
*短時間運行 **輸出功率有所降低 | 保留修改權 | *short term **reduced output power | Subject to change without notice |
