應用
（鉆, 銑, 磨, 雕刻）機床電主軸 | Applications | Drilling, Milling, Grinding, Engraving | |
外殼夾裝尺寸 | 60 mm | Clamping diameter | 60 mm |
馬達類型 | 3相異步高速電機 | Motor system | 3 Phase asynchronous motor |
轉速范 | 3,000 – 50,000 min-1 | Speed range | 3,000 - 50,000 rpm |
額定電壓 | 220 V | Voltage | 220 V |
電流 | zui大 14 A | Current | max. 14 A |
扭矩 | zui大 215 Ncm | Torque | max. 215 Ncm |
頻率 | 50 - 833 Hz | Frequency | 50 - 833 Hz |
功率 | zui大 2,000 W | Output power | max. 2,000 W |
重量 | 3.5 kg | Weight | 3.5 kg |
軸承 | 3 x 鋼球軸承, 油脂潤滑 | Bearing system | 3 x Steel, lifetime lubrication |
防護等級 | IP 54/57 | Protection category | IP 54/57 |
電機保護 | PTC - 130 °C | Motor protection | PTC - 130°C |
安裝位置 |
| Working position |
|
負載方向 | 軸向 + 徑向 | Load direction | axial + radial |
錐面跳動 | 通常1 µm | Run-out (taper) | [ 1 µm |
*夾持范圍 | Ø 0.5 – 7.0 mm (ER 11) | Chuck clamping range | Ø 0.5 - 7.0 mm (ER 11) |
換刀方式 | 1 開口扳手 (SW 13) | Tool change | 1 open-end wrench (13 mm) |
冷卻系統(tǒng) | 外夾具冷卻 | Cooling system | Cooling via clamping bracket |
防水防塵措施 | 密封氣0.8–1.0 bar(管徑Ø 內/外 4/6 mm) | Protected against dirt | Sealing air 0.8 - 1.0 bar |
外殼材料 | 不銹鋼 | Housing material | Stainless steel |
*變頻器 | e@syDrive® TV 4538, EMERSON SKCD200220 | Inverter recommendation | e@syDrive® TV 4538, EMERSON SKCD200220 |
| 保留修改權 |
| Subject to change without notice |
