揚州市金鑫電纜有限公司
會員1.png)
揚州市金鑫電纜有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質生產商
所 在 地揚州市
聯系方式：錢女士查看聯系方式
更新時間：2025-01-30 09:35:05瀏覽次數：32次
聯系我時，請告知來自 儀表網鋁合金電力電纜
鋁合金電力電纜Aluminum Alloys Power Cable
一、執行標準
GB/T31840-2015、NB/T42051-2015
Execution standardGB/T31840-2015、NB/T42051-2015
二、電纜名稱型號及規格見下表Name cable type andspecificationsee the table below
型號Type | 名稱The name says |
V(YJ)LHV | 鋁合金芯聚氯乙烯(交聯聚乙烯)絕緣聚氯乙烯護套電力電纜 Aluminum conductor, PVC (cross-linked polyethylene) insulated PVC sheathed power cable |
V(YJ)LHV22 | 鋁合金芯聚氯乙烯(交聯聚乙烯)絕緣鋼帶鎧裝聚氯乙烯護套電力電纜 Aluminum conductor, PVC (cross-linked polyethylene) insulation tape armored PVC sheathed power cable |
V(YJ)LHV23 | 鋁合金芯聚氯乙烯(交聯聚乙烯)絕緣鋼帶鎧裝聚乙烯護套電力電纜 Aluminum conductor,PVC (cross-linked polyethylene) insulation tape armored PE sheathed power cable |
V(YJ)LHV32 | 鋁合金芯聚氯乙烯(交聯聚乙烯)絕緣細鋼絲鎧裝聚氯乙烯護套電力電纜 Aluminum conductor, PVC (cross-linked polyethylene) insulated fine steel wire armored PVC sheathed power cable |
V(YJ)LHV33 | 鋁合金芯聚氯乙烯(交聯聚乙烯)絕緣細鋼絲鎧裝聚乙烯護套電力電纜 Aluminum conductor, PVC insulated fine steel wire (cross-linked polyethylene) armoring, PE sheathed power cable |
YJLHVS(6) 2 | 鋁合金芯聚氯乙烯(交聯聚乙烯)絕緣鋁合金帶聯鎖鎧裝聚氯乙烯護套電力電纜 Aluminum conductor, PVC (cross-linked polyethylene) insulation aluminum alloy with interlocking armored PVCsheathed power cable |
| YJLHY S(6)3 | 鋁合金芯聚氯乙烯(交聯聚乙烯)絕緣鋁合金帶聯鎖鎧裝聚乙烯護套電力電纜 Aluminum conductor, PVC (cross-linked polyethylene) insulation aluminum alloy with interlocking armoured PEsheathed power cable |
注:導體材料為稀土高鐵鋁合金時，應在名稱上注明稀土高鐵鋁合金;如有阻燃要求的可在型號中加Z(A、B、C、D)，有耐火要求的可在型號中加NH，有無鹵低煙的電纜在型號中加WDZ(A、B、C、D),防水要求的加FS。
Note: conductor material for rare earth high iron alloy, rare earth shall be indicated in the name of high-speed aluminium alloy: if there is Arequirement for flame retardant can add Z to the model (A, B, C, D), NH are added into the model, with the presence of low smokecable WDZ are added into the model (A, B, C, D), the waterproof requirement of FS
三、型號的組成及其代表意義
阻燃Flame retardant........................................................................................................................................Z（R）
耐火 Refractory......................................................................................................................................................NH
低煙無鹵 Low smoke zero halogen.............................................................................................................WDZ
阻燃等級Flame retardant grade......................................................................................................A、B、C、D
鋁合金芯 Aluminum alloy core..........................................................................................................................LH
交聯聚乙烯絕緣 Cross-linked polyethylene insulation................................................................................YJ
聚氯乙烯護套 PVC sheathed...........................................................................................................................V、2
聚乙烯護套 PEsheathed....................................................................................................................................V、3
鋼帶鎧裝 Steeltape armoured...............................................................................................................................2
細鋼絲鎧裝 Fine steelwire armoured..................................................................................................................3
鋁合金帶聯鎖鎧裝 Aluminum alloy with interlocking armoured........................................................S、6
四、鋁合金電纜的優異特性
抗蠕變性能-鋁合金導體的合金材料與退火處理工藝減少了導體在受熱和壓力下的“蠕變"傾向，相對于純鋁，抗蠕變性能提高300%，避免了由于冷流或塘變引起的松弛問題。
熱膨脹系數-鋁合金的熱膨脹系數與銅相當，基本上與連接器的膨脹和收縮一致。連接性能-用鋁合金制造的電氣連接與銅導體制造的連接一樣安全穩定，鋁合金的成分大大改進了其連接性能，當導體退火時，添加的鐵產生高強度抗蠕變性能，即使在長時間過載和過熱時，也能保證連接穩定。
自重承載力強-鋁合金改善了純鋁的抗拉強度，鋁合金電纜可支撐4000米長度的自重，銅電纜只能支撐2750米防腐蝕性能-鋁合金在空氣中很快形成一層厚度約為
2x10-4mm%的緊密氧化膜，防止內部的金屬被進一步腐蝕，而銅則不能形成氧化膜，特別是連接點產生的電化學腐蝕，鋁合金的抗腐蝕性能優于銅。
柔韌性-鋁合金的合金配方、加工工藝，使柔韌性大幅提高。鋁合金比銅柔韌性高30%。
彎曲性能-純鋁電纜彎曲性能很差，彎曲很容易發生斷裂、折斷，鋁合金反彈性比銅低40%，在安裝過程中更容易彎折，有效的減少安裝成本，降低事故風險。
鎧裝特性-鋁合金鎧裝電纜彎曲性能好，最小彎曲半徑優于銅;機械強度高，具有抗張性能、抗壓性能和抗沖擊性能:防蟲蟻、老鼠咬:重量輕，更易安裝。
The excellent properties of aluminum alloy cable
Creep resistance of aluminum alloy conductor alloy materials andannealing treatment reduced the conductor under heat and pressure of"creep" tendency, relative to the pure aluminum, creep resistance increasedby 300%, to avoid the problems caused by cold flow or creep relaxation.
Thermal expansion coefficient of thermal expansion coefficient ofaluminium alloy and copper, basically are in complete accord with theexpansion and contraction of the connector.
The electrical connection in the connection performance - made ofaluminum alloy with copper conductor manufacturing as security andstability of the connection, the composition of aluminum alloy greatlyimprove the connection performance, when the conductor annealing.adding iron to produce high strength and creep resistance, even in along time when overload and overheat, can guarantee the stability ofconnection.
Weight bearing capacity is strong, aluminum alloy improved thetensile strength of pure aluminum, aluminum alloy of every cable cansupport 4000 meters in length, the copper cable can support 2750 meters.
Anti-corrosion performance - aluminum alloy in air quickly form athickness of about 2 x 10-4 was compact oxidation film, prevent theinternal metal was further corrosion, and copper could not form oxidationfilm, especially the connection point.
Electrochemical corrosion, the corrosion resistance of aluminumalloy is better than that of copper. Flexibility - aluminum alloy unique alloyformula and processing technology, to improve the flexibility. Aluminumalloy flexibility is 30% higher than copper.
Bending performance - the bending performance is very poor, purealuminum bending is easy to break, break, aluminum alloy is lower thancopper 40%, elasticity during the installation process easier to bendeffectively reduce the installation cost, reduce the risk of accidents.
Armoured features - aluminum alloy armoured cable bendingperformance is good, the smallest bending radius is better than that ofcopper; High mechanical strength, tensile properties, compressiveproperties and impact resistance; Insect-resistant ant, mice bite; Lightweight, easier to install
五、產品結構示意圖Product structure diagram
銅纜線芯截面 Copper core cross sectionm mm2 | 90℃時銅芯電纜載流量 (A)空氣中敷設 90℃Copper core cablecurrent carryingVolume( A ) installed in air | 90℃時銅芯電纜載流量 (A) 埋地敷設 90℃copper core powerCable current-carryingcapacity (A)Buried laying | 鋁合金線芯截 Aluminum alloy wirecutting(mm') | 90℃鋁合金電纜載流量 (A)空氣中敷設 90℃hafnium alloy cablecurrent carryingVolumeinstalled in air | 90℃ 鋁合金電纜載流量（A）埋地敷設 90℃Hafnium alloy cablecurrent carryingVolume ( A ) buried |
16 | 105 | 125 | 25 | 102 | 117 |
| 25 | 134 | 159 | 35 | 127 | 139 |
| 35 | 164 | 189 | 50 | 155 | 170 |
| 50 | 200 | 225 | 70 | 195 | 205 |
| 70 | 252 | 227 | 120 | 277 | 282 |
| 95 | 304 | 324 | 150 | 315 | 316 |
| 120 | 355 | 370 | 185 | 366 | 361 |
| 150 | 407 | 417 | 240 | 435 | 417 |
| 185 | 462 | 462 | 300 | 484 | 464 |
| 240 | 551 | 542 | 400 | 593 | 542 |
| 300 | 630 | 611 | 500 | 680 | 612 |
| 400 | 747 | 699 | 630 | 803 | 699 |
七、電纜的使用條件Theuse condition ofthe cable
1,電纜額定電壓等級U/U(Um)標示如下: 0.6/1(1.2)、1.8/3(3.6)、6/6(7.2)、6/10(12)、8.7/10(12)、8.7/15/(17.5)、12/20(24).
18/30(36)、21/35(40.5)、26/35(40.5))kV。
2.交聯聚乙烯絕緣電纜導體的**額定工作溫度為90，短路時[最長持續時間不超過5s)，申纜導體的**溫度不超過250°
3.電纜允許敷設與安裝溫度不低于0C，電纜埋地敷設時，電纜軸心與地面距離為700mm為宜。
4.電纜彎曲半徑:無鎧裝電纜應不小于電纜外徑的15倍，有鎧裝電纜應不小于電纜外徑的20倍.
1.The cable is rated voltage grade U0 /U (Um) labeled as follows: 0.6/1 (1.2), 1.8/3 6/6 6/6 (3.6),(7.2), (12),(12),(17.5)/8.7/15 8.7/10 122012/20(24)(36),21/35(40.5)2/35 kV(40.5))
2. The crosslinking polyethylen insulated cable conductor of the highest working temperature is 90 ", rated short circuit when (the longestduration of no more than 5 s), cable conductor of the highest temperature does not exceed 250 C.
3.The cable and installation allows the temperature is not lower than 0 C, the cable, buried cable axis and the ground distance is 700 mm.
4. The bending radius: no armoured cable should be not ess than 15 times of cable diameter. armored cable should be not less than 20 timesof cable diameter.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
儀表網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
