Anritsu | MS8606A 數字移動無線發射機測試儀|日本安立|MS8606A|綜合測試儀 品牌:日本安立 | Anritsu 特點
·300KHz~3GHz
·適用于CDMA和PDC測量
·高速,高精度測量
·內置頻譜分析儀及AF測量功能
·內置頻譜分析儀頻率覆蓋10MHz~3GHz
技術指標 | Frequency range | 300kHz to 3GHz | | Max.input level | MAIN connector:+40dBm(10W),AUX connector:+20dBm(100mW) | | Input impedance | 50Ω,VSWR:≤1.2(≤2.2GHz,MAIN connector),≤1.3(≤2.2GHz,MAINconnector) | | Input connector | N-type(MAIN connector),TNC-type(AUX connector) | | Reference oscillator | Frequency:10MHz
Starting characteristics:≤5*10^-8/day(after 10minutes of warm-up,comparedto the frequency after 24-hour warm-up)
Aging rate:≤2*10^-8/day,≤1*10^-7/year(compared to the frequency after 24-hourwarm-up)
Temperature characteristics:≤5*10^-8(compared to the frequency at 25℃)
External reference input:10 or 13Mhz(±1 ppm),2 to 5Vp-p | | Power meter | Frequency range:300kHz to 3Ghz
Level range:0 to +40dBm
Measurement accuracy:±10%(after zero calibration) | |
S
y
e
c
t
r
u
m
a
n
a
l
y
z
e
r | Frequenc | Frequency setting
Setting range:0 to 3GHz(band:0),10MHz to 3Ghz(band:1),Setting resolution:1Hz
Frequency accuracy
Display accuracy:±(display frequency x reference frequency accuracy+spanx accuracy)
Normal marker:Same as display frequency accuracy
Delta marker:Same as span accuracy
Frequency span
Setting range:0Hz,10kHz to 3Ghz(band:0);0Hz to 2.99GHz(band:1)
Span accuracy:±2.5%
RBW(resolution bandwidth)
Setting range:300Hz to 1MHz(3dB BW,1-3 sequence)
Accuracy:±2%(300Hz to 300kHz),±10%(1kHz)
Selectivity(60dB:3dB):≤5:1
VBW(video bandwidth):3Hz to 100kHz(1-3 sequence),through
Side bａnd noise:≤-95dBc/Hz(1Ghz,10kHz offset),≤-115dBc/Hz(1Ghz,100kHz offset) | | Amplitude(at Band:1) | Maximum input level
Continuous average power:+40dBm(MAN connector),+20dBm(AUX connector)
DC voltage:0V
Average noise level (at RBW:1kHz,VBW:10Hz):
≤-90dBm(MAIN connector,10MHz to 1Ghz,input attenuator:20dB)
≤-90dBm+f(GHz)(MAIN connector,>1Ghz,input attenuator:20dB)
≤-110dBm(AUX connector,10MHz to 1Ghz,input attenuator:0dB)
≤-110dBm+f(GHz)(AUX connector,>1GHz,input attenuator:0dB)
Residual response:≤-70dBm(MAIN connector,input attenuator:20dB),≤-90dBm(AUXconnector,input attenuator:0dB)
Total level accuracy
MAIN connector:±1.5dB(reference level:+10.1 to +40dBm,at 0 to -50dB of referencelevel)
AUX connector:±1.5dB(reference level:-9.9 to +20dBm,at 0 to -50dB of referencelevel)
Reference level
Setting range:-50 to +50dBm(MAIN connector),-75 to +30dBm(AUX connector)
Setting resolution:0.1dB
Accuracy:±0.5dB(MAIN connector,+10.1 to +40dBm),±1.0dB(MAIN connector,-50to +10dBm)
±0.5dB(AUX connector,-9.9 to +20dBm),±1.0dB(AUX connector,-75 to -10dBm)
RBW switching error:±0.1dB(referenced to RBW:3kHz)
Frequency response:±0.5dB(referenced to 100MHz,input attenuator:30dB(10dBfor AUX);temperature range:18 to 28℃)
Log linearity:
±10MHz to 2.2GHz,reference level:≥0dBm(MAIN connector);≥-20dBm(AUX connector)
2nd harmonic distortion:≤-55dBc(10 to 100MHz),≤-60dBc(100 to 1500MHz)*Atmixer input level:-30dBm | | Sweep | Setting range:100ms to 1000s(frequency axis sweep),100msto 1000s(time axis sweep,RBW:≤1kHz)
10ms to 1000s(time axis sweep,RBW:3 to 10kHz),1ms to 1000s(time axis sweep,≥30kHz)
Trigger switch:FREERUN,TRIGGERED
trigger source:WIDE IF VIDEO(3dB bandwidth:≥20MHz,trigger slope:RISE/FALL)
EXT(trigger level:TTL level,trigger slope:RISE/FALL)
Trigger delay
Setting range:0μs to 100ms,Resolution:2μs
Gate delay,gate width
Setting range:2μs to 100ms,Resolution:2μs | | Functions | Marker
Signal search:PEAK-CF,PEAK-REF
Zone marker:NORMAL,DELTA
Marker-function:MARKER-CF,MARKER-REF,ZONE-SPAN
Peak search:PEAK,NEXT PEAK,NEXT RIGHT REAK,NEXT LEFT PEAK
Measurement
Noise power:dBm/Hz,dBm/ch
C/N:dBc/Hz,dBc/ch
Occupied bandwidth:Power N% method,X dB down method
Adjacent channel power
Reference measurement :Total power/reference level method,
Display method:Channel designate display 2 channels X 2,graphic display
Average power of burst signal:Average power within the specified time rangeof the time axis waveform | | Others | Number of data point:501
Detection mode:POS PEAK,NEG PEAK,SAMPLE
Display function:TRACE A,TRACE B,TRACE TIME
Storage function:NORMAL,VIEW,MAX HOLD,MIN HOLD,AVERAGE,CUMULATIVE,OVER WRITE | | a
n
a
l
o
g
m
e
a
s
u
r
e
m
e
n
t | RF analyzer | Power measurement(wide band)
Frequency range:300kHz to 3GHz
Level range:0 to +40dBm(MAIN connector)
Accuracy:±10%(after zero point calibration)
Power measurement(narrow band)
Frequency range:10MHz to 3Ghz
Input level:0 to +40dBm(MAIN connector),-40 to +20dBm(AUX connector)
Accuracy:±10%(MAIN connector,after calibration with internal wide bａnd powermeter)
±1dB(AUX connector,reference level:≥-12dB,after calibration)
Linearity: ±0.3dB(0 to -30dB)
Frequency measurement
Frequency range:10MHz to 3Ghz
Input level:-15 to +40dBm(MAIN connector),-40 to +20dBm(AUX connector)
Resolution:1Hz
Accuracy:±(reference oscillator accuracy+10Hz)*IF frequency counting(bandwidth:±30kHz)
FM measurement
Frequency range:10MHz to 3GHz
Input level:-15 to +40dBm(MAIN connector),-40 to +20dBm(AUX connector)
Deviation:0 to 20KHz
Demodulation frequency :30Hz to 20kHz
Accuracy:1% of indicated value+residual FM(demodulation frequency:1kHz)
Frequency response:±0.5dB(demodulation frequency:referenced to 1kHz)
Residual FM:8Hz-rms(demodulation frequency:0.3 to 3kHz)
Distortion:0.3%(demodulation frequency:1kHz,demodulation bandwidth:0.3 to3kHz,deviation:5kHz)
Filters(3dB cut-off):HPF(50Hz,300Hz),LPF(3KHz,15kHz)
φM measurement
Frequency range:10MHz to 3GHz
Accuracy:1% of indicated value+residual φM(demodulation frequency:1kHz)
Frequency response:±0.5dB(demodulation frequency:referenced to 1kHz)
Residual φM:0.01 rad-rms(demodulation bandwidth:0.3 to 3kHz)
Distortion:0.5%(demodulation frequency:1kHz,demodulation bandwidth:0.3 to3kHz,deviation:5 rad)
Filters(3dB cut-off):HPF(50Hz,300Hz),LPF(3KHz,15kHz) | | Other | Display:Color TFT-LCD,7.8inch,640*480 dots
Hard copy:Enables data hard copy of the display through a parallel interface(printer:ESC/Pcompatible printer)
GPIB:This equipment is specified as a device,can be controlled from externalcontroller(excluding power swithc).
Interface functions:SH1,AH1,T6,L4,SR1,RL1,PP0,DC1,DT1,C0,E2
Parallel interface:Conform to the Centronics.Outputs printing data to printer.D-sub25-pin connector(female)
RS-232C:All functions except power switch controlled by external controller(bandrate:1200,2400,4800,9600bps) | | Dimensions and mass | 426(W)*221.5(H)*451(D)mm,≤22kg | | Power | 100 to 120/220 to 240Vac(-15%+10%,max.voltage:250V,automaticvoltage switch system),47.5 to 63Hz,≤300VA | | Operating temperature | 0°to 50℃ |
訂貨信息
| Model/Order No. | Name | | | MS8606A J0576B J0768 J0017F F0014 MS8606A-01 MX860601B MX860602A MT8801B MS8604A MD1620C MD6420A MS2602A MG3670B/C MG3671A/B J0127C J0769 J0040 MN1607A MA1612A J0395 J0007 J0008 B0329D B0331D B0332 B0333D B0334D | Mainframe Digital Mobile Radio Transmiter Tester Standard accessories Coaxial cord(N-P.5D-2W.N-P),1m Coaxial adapter(N-J.TNC-P) Power cord,2.6m Fuse,6.3A Options AF measurement(audio analyzer,AF oscillator) CDMA Measurement Software PDC Measurement Software Peripherals Radio Communication Analyzer Dignalling Tester Data Transmission Analylzer Spetrum Analyzer Digital Modulation Signal Generator Digital Modulation signal generator Optiona accessories Coaxial cord(BNC-P.RG-58A/U.BNC-P),0.5m Coaxial adapter(BNC-J.TNC-P) Coaxial adapterN-P.BNC-J) Coaxial Switch (DC to 3 GHz,50Ω,external controllable) Four-Point Junction Pad(5 to 3000MHz) Fixed attenuator for high power(30dB,30W,DC to 8GHz) GPIB cable,1m GPIB cable,2m Front cover(1MW5U) Front handle(2 pcs/1 set) Joint prate(4 pcs/set) Joint prate(4pcs/set) Rack mount kit Carrying case(hard type) | 1pc 1pc 1pc 2pcs |
附件
·選件1:AF測量
·MX860601A CDMA測量軟件
·MX860602A PDC測量軟件
|
會員1.png)
