水冷法蘭-安徽貝意克設備技術有限公司

　　This is a pair of sealing flange with SS water cool tubing . If you cannot use a ceramic block in two ends of the tube, you must use the water cool tubing to keep flange cool (otherwise silicone o-ring may get damaged).Dimensions (50/60/80/100mm) and material (304S, 316L) are optional.

　　這是一對帶有SS水冷管的密封法蘭。如果在管的兩端不能使用陶瓷塊，則必須使用水冷管來保持法蘭冷卻(否則硅膠O型圈可能會損壞)。尺寸(Φ50/60/80/100mm)、材質(304S、316L)可選。

　　規格參數SPECIFICATIONS

Features

主要特點

Made of Stainless Steel with double high-temperature silicon O-rings on the flange.

法蘭上采用雙高溫硅膠O型圈不銹鋼制成。

Stainless steel needle valve with 1/4" pipe adaptor.

不銹鋼針閥配“1/4"管接頭。

The assembly kit will seal ceramic and quartz tube.Vacuum meter is installed in one side of flange.

組裝套件將密封陶瓷和石英管，在法蘭一側安裝真空表。

水冷法蘭

Vacuum level

真空度

10E-4 torr by molecular pump?ａnd 10E-2 torr?by mechanical pump

10e-4乇分子泵?和10e-2乇?機械泵

Optional part

可選的部分

For CVD application, please choose our Anti-corrosive Vacuum Gauge.

對于CVD系統，請選擇我們的防腐蝕真空計。

We provide various Fitting Ends for separate purchase.

我們提供不同的裝配末端，供單獨購買。

The product is heavy, please consider our Adjustable Tube Support.

產品重量大，請考慮我們的可調管支架。

水冷法蘭

Installation Video

安裝視頻

Dimensions

尺寸

水冷法蘭

Click to enlarge

Warning

注意事項

Must put a refractory tube block in front of the flange (see picture below) to avoid heat radiation melt silicone O-ring. You may order a ceramic block in related products.

必須在法蘭前放置耐火管塊，避免熱輻射熔化硅膠O型圈老化。

Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs.

請不要擰緊法蘭上的三個六角螺絲，以免發生超壓事故。推薦扭矩為35～40英寸。

For safety reasons, it is strictly forbidden to enter any flammable or corrosive gas into our flange. If you have any questions, please contact us為了安全考慮，嚴禁通入任何有毒、易燃或腐蝕性氣體進入我們的法蘭。如果有疑問請與我們聯系。

水冷法蘭