高功率激光耦合傳輸?shù)腻兡す饫w產品定制服務
光纖頭鍍膜端要求：
?高質量的光纖拋光端面，粗糙度影響鍍膜質量。眾周所知，膜層的反射率跟膜層厚度有直接關系。如 果鍍膜凹凸不平，導致膜層厚度不均勻，光透射或者反射率會受到明顯的影響。鍍膜端面的清潔度是 另外一個原因，因?yàn)椴煌该鞯奈镔|(zhì)容易吸收激光產生熱量，導致光線頭燃燒。
?光纖頭研磨沒有無膠水殘留，因?yàn)榇蠖鄶?shù)膠水都是有機物，容易燒光纖，光纖側面也必須有很高 的清潔度
?低熱吸收和高損壞閾值鍍膜，因?yàn)榧す饽芰亢艽?，密度很高，要確保膜層能承受如此大的能力密度
500倍顯微鏡下光纖端面檢測圖像
圖4.研磨后光纖端面 圖5.光纖側面 圖6.端面鍍?cè)鐾改?nbsp; 圖7.端面鍍雙色膜
光纖和插芯的選擇:
a | Jumper Type | Bare fiber with coating for high-power laser | BF |
Fiber tail with coating for high-power laser | FT | ||
Standard jumper with coating for high-power laser | SJ | ||
b | Ferrule/ Connector Type | FC/PC,flat tip | FCF |
FC/Protruding tip | FCP | ||
SMA905/PC,flat tip | SMF | ||
S MA905/Ca nti l eve red tip | SMC | ||
for custom design connector | FCD | ||
c | Fiber Jacket | 00.9 Buffer | 1 |
O2.0 cable | 2 | ||
03.0 cable | 3 | ||
03.0 stainless steel armored cable | 4 | ||
d | Fiber Type (Ref: Nufern fiber parts #) | MM-S105/125-15A, core/clad:105/125um, 0.15NA | M1 |
MM-S105/125-22A, core/clad:105/125um, 0.22NA | M2 | ||
MM-S200/220-22A, core/clad:200/220um, 0.22NA | M3 | ||
MM-S200/240-22A, core/clad:200/240um, 0.22NA | M4 | ||
Other parts(Customer provide) | MX | ||
e | Length | 1.0m | 10 |
1.5m | 15 | ||
2.0m | 20 | ||
f | Coating Type | Anti-Reflection Coating: 800 - 990nm, transmittance > 99.5% | AR |
Dichroic Coating: 800 - 990nm,transm ittance > 99.0% 1040 -1050, reflectivity > 99.5% 1050 - 1100, reflectivity > 99.7% | DR |
