氧化鋯氧氣含量分析儀ZR22S、ZR402G屬于智能環保型氣體分析儀,采用分體式安裝,分為普通型和高溫型。
ZR22S屬于氧化鋯探頭,也稱為氧化鋯檢測器,在我各大型窯爐中應用(產生能源用的鍋爐:重油、天然氣或煤),不適用于氨、氯腐蝕性氣體。
ZR22S、ZR402G Zirconia oxygen analyzer which belongs to inligent environmental protection type gas analyzer, the split installation, is divided into ordinary and high temperature type.
ZR22S belongs to zirconia, also known as zirconia detector, in my major in kiln application ( to generate energy for boiler : crude oil, natural gas or coal ), do not apply to ammonia, chlorine corrosive gas.
(一)ZR22S氧化鋯探頭:在溫度范圍為0-700℃,氧化鋯探頭為標準探頭。在700℃-1100℃為小高溫,應選用高溫探頭。如果溫度范圍大于1100℃,則采用高溫適配器,高溫取樣探頭。
In the temperature range of0-700C, zirconia as the standard probe. In 700- 1100 DEG C high temperature should be used for small, high temperature probe. If the temperature range is larger than 1100 DEG C, then using high temperature adapter, high temperature sampling probe.
ZR22S氧化鋯探頭規格:
以插入煙道為基準:L=400mm、L=600mm、L=800mm、L=1000mm、L=1200mm、L=1500mm(適合于低溫型)
To insert a flue for reference: L =400mm, L =600mm, L =800mm, L =1000mm, L =1200mm, L =1500mm ( suitable for low temperature type )
(二)ZR402G屬于氧化鋯分析儀,也稱為氧量變送器,我公司采用智能液晶顯示表頭,可以直接顯示氧含量濃度,也可以遠傳輸出4-20mA電流信號,達到遠程監測氧含量,顯示內容:氧濃(O2%)、氧勢(mV)、爐溫(℃)、加熱電壓(V)、 量程上、下限(O2%)、報警上、下限(O2%) 氧量變送器分為壁掛式和盤裝。
ZR402G氧量變送器儀表尺寸:壁掛式:325×250×110(智能儀表);盤裝:(160×80×250;152×76×80)
Also known as oxygen transmitter, I am using the inligent liquid crystal display, can display the concentration of oxygen, can also be remote4-20mA output current signal, to achieve the remote monitoring of oxygen content, display content: oxygen concentration ( O2% ), oxygen potential ( mV ), temperature ( DEG ), heating voltage ( V ), range, lower limit ( O2% ), the alarm, the lower ( O2% ) oxygen transmitter into wall-mounted and disc device.ZR402G oxygen transducer size: Type:325x 250x 110( inligent instrument ); set: (160x 80x 250;152x 76x 80)
ZR402G主要技術參數:
(1)量程:0~25.0 %O2
(2)測量精度:3%
(3)工作環境溫度:0-50℃
(4)輸出: 0—10mA 或 4—20mA 負載電阻: 0-800Ω
(5)供電電壓:220V.AC±10% 50Hz
(6)功率消耗:150W
Main technical parameters:
(1):0 ~25%O2range
(2) measuring accuracy:3%
(3) the working environment temperature:0-50C
(4) output:0- 10mA or 4- 20mA:0-800 ohmresistive load
(5) power supply voltage:220V.AC+ 10% 50Hz
(6) power consumption:150W
(三)ZR22S與ZR402G連接線規格:
RVVP 2×1.5;KX-G 2×1.5;RVV 2×2.5