200/100/60頻寬
4輸入通道
1GSa/s 實時取樣率以及 25GSa/s 等效取樣率
25000點之記憶體長度
5.6 吋 TFT 彩色 LCD 熒幕
支持USB HOST/DEVICE：可使用U盤及USB打印機
支持AC/DC電源操作模式（選購）
200/100/60頻寬
4輸入通道
1GSa/s 實時取樣率以及 25GSa/s 等效取樣率
25000點之記憶體長度
5.6 吋 TFT 彩色 LCD 熒幕
支持USB HOST/DEVICE：可使用U盤及USB打印機
支持AC/DC電源操作模式（選購）
GDS-2000系列數字儲存示波器采用all-in-one設計，包括1GSa/s實時采樣率，25k內存長度、2或4信道、TFT彩色LCD顯示、支持USB接口、打印機直接打印功能、電池電源操作和高達27項的強大自動測量功能。
GDS- 2000系列數字儲存示波器有200MHz/100MHz/60MHz頻寬、2或4通道的6種機型。在當今市場同等級的產品中GDS-2000系列以 1GSa/s實時采樣率（25GSa/s等效采樣率）和25k的記錄長度…為測試環境提供更好的平臺。27種自動量測功能、FFT測量、高級觸發選項、 12格超寬水平顯示、時間顯示、計頻功能、GO/NO-GO功能、多國語言選單、實時在線幫助功能說明和循環測量功能都是GDS-2000系列數字儲存示 波器眾多功能中的一環。
現在, GWInstek秉持以顧客為導向的理念，GWInstek除了提供給消費者的產品之外，對于產品質量更深具信心，因此為了回饋GWInstek的 廣大消費者，決定在推出GDS-2000系列2信道與4信道數字儲存示波器體貼的終生保固計劃，藉此讓消費者能夠zui安心的使用GWInstek高質量的數字示波器。
| 4CH & 2CH Selection |
| |
| 4-channel models have joined the product lineup in addition to the traditional 2-channel models. The vertical scale of each channel carries the full bandwidth of the model at 200MHz, 100MHz or 60MHz. With 4 full bandwidth channels, a larger range of applications are possible. Typical examples of four-channel applications include testing switching power supplies and rotary encoder measurements. |
| 1GSa/s Real-time Sampling & 25GSa/s Equivalent-time Sampling |
| |
| 1GSa/s Real-Time Sampling allows measure high frequency signals accuray. A higher sampling rate helps to acquire more waveform data in a short period of time. It is especially useful for the single-shot （non-repetitive） waveform capture and observation as the faster the waveform data can be acquired the better the waveform reconstruction. For repetitive signals, however, Equivalent-Time （ET） sampling is a better tool than Real-Time Sampling. ET sampling is able to acquire data periodically, with each successive sample increasing the sampling points. By acquiring data from repetitive waveform cycles, ET Sampling Technology accuray reconstructs the waveforms at a resolution of up to 40ps. The GDS-2000 Series is able to sustain a 25GSa/s sampling rate for repetitive waveform acquisition and reconstruction compared to a Real-Time Sampling capability of 1GSa/s rate. |
| TFT Color LCD Display |
| For a crisp and clear view, the GDS-2000 Series has a color TFT LCD display. Compared to STN displays, TFT panels have reduced flicker, wider viewing angles and brighter color reproduction. With support for displaying 4 waveforms, measurement grids and signal data at the same time, a bright, clear, colored screen is a necessity for comparing and analyzing data. |
| 27 Automatic Measurements |
| The GDS-2000 DSO Series employs a comprehensive set of automatic measurement features. The automatic waveform measurement feature includes 27 frequently used measurement items grouped into three sections : Voltage, Time （Frequency）, and Delay. A maximum of 10 measurement results can be shown on the screen and updated in real-time. These automatic measurement features are an effective way to monitor the characteristics of a signal in real-time. 19 automatic measurements can be shown on screen simultaneously. |
| Go/NoGo Testing |
| The Go/NoGo testing function checks whether an input signal violates a user-defined template. Setting the template is a simple two -step process. Select a reference waveform from an input signal or waveform file and configure the violation tolerance from the reference waveform. After setting the template, Go/NoGo testing is ready to go. The GDS-2000 Series compares the input signal with the template in real time and shows the test result on the screen. Both the type of Go/NoGo violation and the reaction to a violation can be configured to meet various application requirements. Any Go/NoGo violations are indicated either by an internal buzzer or by sending a control signal to an external device via the Go/NoGo BNC output on the rear panel. |
| On-Line Help And Multi-Language Support |
| For hassle-free operation, the GDS-2000 Series provides a built-in help manual via the Help key. Press the "Help" button to get into the on-screen Help mode, and then press any key to display instructions about that key's function on the screen. The GDS-2000 Series interface menu and the on-screen Help have multi-language support. Supported languages include: English, Russian, Spanish, Korean, German, Japanese, Traditional and Simplified Chinese. This provides localized help if English is not your preferred language and offers an easy environment for multicultural joint-projects. In the future, GW Instek will increase the number of languages to provide broader localized support for languages that are not currently supported. |
| Data Storage & Transfer And USB Printing Support |
| 20 sets of waveform data, 20 panel setups and 4 reference waveforms can be saved into internal memory to be recalled later for display. All the waveform data, panel setups and screen images can be saved to a USB flash drive. With optional PC software available for download on the GW Instek web site, the GDS-2000 series can be remoy controlled. The software can also monitor and record waveform data over a period of time by continually transferring data to a PC for further analysis. The GDS-2000 Series supports printing directly to a USB compatible printer. Screen images can be printed in either color or grayscale depending on the printer settings. |
| Battery Power Operation |
| With the optional Li-ion battery packs, the GDS-2000 Series market coverage is extended to field application areas where AC power is not available. Fully charged, the two light-weight battery packs keep a GDS-2000 DSO running under normal operation for over 3 hours. The built-in battery charger automatically recharges the battery packs whenever the oscilloscope is connected to AC power. An optional soft carrying case （GSC-005） is available to accommodate field applications |
