280 280 系列波形發生器-儀表網

公司介紹主營產品

上海洪富一向注重產品創新、產品質量和技術服務，現有一個直接受總經理*的新產品開發中心，人才濟濟，設備*，引進消化上*的傳感技術和單片機技術，不斷開發和更新符合用戶需求的高科技含量的智能流量儀表；另外，上海洪富免費上門調試，并保修壹年，在保修期內免費提供維修用配件，*上門維護。

主營產品：美國紅魔鬼混合機;美國TABER磨耗儀;德國儀力信;JENCO;PH計;日本DKK;PH計;德國KK探傷儀;美國DEFELSKO涂層測厚儀;國力科示波器;亞光電源;上泰PH計;米克便攜式PH計

點擊展示更多內容

產品簡介在線詢價

A selection of universal waveform generators offering superior performance and excellent value
These universal waveform generators combine many generators in one instrument. Their extensive signal simulation capabilities include arbitrary waveforms

280 系列波形發生器產品詳情

Choice of 1, 2 and 4 independent or linked channels
40 MS/s max. sampling speed
16 MHz function generator
10 MHz pulse generator
Pulse train pattern generator
Arbitrary waveforms of up to 65 k points
Powerful modulation capabilities
Built-in trigger generators
Waveform Manager Plus for Windows® software
Multiple standard waveforms recalled from internal memory
RS-232 and GPIB interfaces

Specifications apply at 18-28 ºC after 30 minutes warm-up, at maximum output into 50 ?.

Arbitrary Waveforms

Waveforms

Maximum waveform size is 65,536 points; minimum waveform size is 4 points. Up to 100 user defined waveforms may be stored in the 256 K point nonvolatile RAM. Waveforms can be defined by front panel editing controls or by downloading of waveform data via RS-232 or GPIB.

Waveform memory

64 k points per channel

Vertical resolution

12 bits

Sample clock

100 mHz to 40 MHz

Resolution

4 digits

Accuracy

± 1 digit of setting

Sequencing

Up to 16 waveforms may be linked. Each waveform can have a loop count of up to 32,768. A sequence of waveforms can be looped up to 1,048,575 times or run continuously.

Output filter

Selectable between 16 MHz Elliptic, 10 MHz Elliptic, 10 MHz Bessel or none

Standard Waveforms

All Waveforms

Accuracy

10 ppm for 1 year

Temp. stability

Typically < 1 ppm/ºC.

Output level

2.5 mV to 10 Vpp into 50 ?

Sine, Cosine, Haversine, Havercosine

Range

0.1 mHz to 16 MHz

Resolution

0.1 mHz or 7 digits

Harmonic distortion

	< 0.1 % THD to 100 kHz;
	< –65 dBc to 20 kHz,
	< –50 dBc to 300 kHz,
	< –35 dBc to 10 MHz
	< –30 dBc to 16 MHz

Nonharmonic spurii

	< –65 dBc to 1 MHz,
	< –65 dBc + 6 dB/octave 1 MHz to 16 MHz

Square

Range

1 mHz to 16 MHz

Resolution

1 mHz （4 digits）

Accuracy

± 1 digit of setting

Rise/fall times

< 25 ns

Pulse and Pulse Train

Rise/fall times

< 25 ns

Period range

100 ns to 100 s

Period resolution

4 digit

Accuracy

± 1 digit of setting

Delay range

–99.99 s to + 99.99 s

Delay resolution

0.002 % of period or 25 ns, whichever is greater

Width range

25 ns to 99.99 s

Width resolution

0.002 % of period or 25 ns, whichever is greater

Triangle

Range

0.1 mHz to 100 kHz

Resolution

0.1 mHz or 7 digits

Linearity error

< 0.1 % to 30 kHz

Ramps and Sin（x）/x

Range

0.1 mHz to 100 kHz

Resolution

0.1 mHz （7 digits）

Linearity error

0.1 % to 30 kHz

Note: The pulse width and absolute value of the delay may not exceed the pulse period at any time. Repetition rate is set by the pulse train period.

Operating Modes

Continuous

Waveform runs continuously

Triggered Burst

Each active edge of the trigger signal will produce one burst of the waveform

Carrier waveforms

All standard and arbitrary

Max. Carrier Frequency

40 Msamples/s for ARB and Sequence. 1 MHz or the maximum for the selected waveform.

Number of cycles

1 to 1,048,575

Trigger repetition

0.005 Hz to 100 kHz internal dc to 1 MHz external

Trigger signal source

Internal from keyboard, previous channel, next channel or trigger generator. External from TRIG IN or remote interface.

Trigger start/stop phase

± 360 ° settable with 0.1 ° resolution, subject to waveform frequency and type

Gated

Waveform will run while the Gate signal is true and stop while false

Carrier waveforms

All standard and arbitrary

Max. carrier frequency

40 Msamples/s for ARB and Sequence. 1 MHz or the maximum for the selected waveform.

Number of cycles

1 to 1,048,575

Trigger repetition

0.005 Hz to 100 kHz internal dc to 1 MHz external

Gate signal source

Internal from keyboard, previous channel, next channel or trigger generator. External from TRIG IN or remote interface.

Gate start/stop phase

± 360 ° settable with 0.1 ° resolution, subject to waveform frequency and type

Sweep

Frequency sweep capability is provided for both standard and arbitrary waveforms. Arbitrary waveforms are expanded or condensed to exactly 4096 points and DDS techniques are used to perform the sweep.

Carrier waveforms

All standard and arbitrary except pulse, pulse train and sequence

Sweep mode

Linear or logarithmic, triggered or continuous

Sweep direction

Up, down, up/down or down/up

Sweep range

From 1 mHz to 16 MHz in one range. Phase continuous. Independent setting of the start and stop frequency.

Sweep time

30 ms to 999 s

Marker

Variable during sweep

Sweep trigger source

The sweep may be free run or triggered from the following sources: Manually from keyboard. Externally from TRIG IN input or remote interface.

Sweep hold

Sweep can be held and restarted by the HOLD key

Multi channel sweep

Any number of channels may be swept simultaneously but the sweep parameters will be the same for all channels. Amplitude, Offset and Waveform can be set independently for each channel.

Tone Switching

Capability provided for both standard and arbitrary waveforms. Arbitrary waveforms are expanded or condensed to exactly 4096 points and DDS techniques are used to allow instantaneous frequency switching.

Carrier waveforms

All except pulse, pulse train and sequence

Frequency list

Up to 16 frequencies from 1 mHz to 10 MHz

Trigger repetition rate

0.005 Hz to 100 kHz internal. DC to 1 MHz external. Usable repetition rate and waveform frequency depend on the tone switching mode.

Source

Internal from keyboard, previous channel, next channel or trigger generator. External from TRIG IN or remote interface.

Tone switching modes

Gated

The tone is output while the trigger signal is true and stopped, at the end of the current waveform cycle, while the trigger signal is false. The next tone is output when the trigger signal is true again.

Triggered

The tone is output when the trigger signal goes true and the next tone is output, at the end of the current waveform cycle, when the trigger signal goes true again.

FSK

The tone is output when the trigger signal goes true and the next tone is output, immediay, when the trigger signal goes true again. Using 2 channels with their outputs summed together it is possible to generate DTMF test signals.

Trigger Generator

Internal source 0.005 Hz to 100 kHz square wave adjustable in 10 us steps. 3-digit resolution. Available for external use from any SYNCOUT socket.

Outputs

Main Outputs – One for each channel

Output impedance

50 ?

Amplitude

5 mV to 20 Vpp open circuit （2.5 mV to 10 Vpp into 50 ?）. Amplitude can be specified open circuit （hi Z） or into an assumed load of 50 ? or 600 ? Vpkpk, Vrms or dBm.

Amplitude accuracy

2 % ± 1 mV at 1 kHz into 50 ?

Amplitude flatness

± 0.2 dB to 200 kHz; ± 1 dB to 10 MHz; ± 2.5 dB to 16 MHz

DC offset range

± 10 V from 50 ?. Offset plus signal peak limited to ± 10 V

DC offset accuracy

Typically 3 % ± 10 mV, unattenuated

Resolution

3 digits or 1 mV for both amplitude and dc offset

Sync Out – One for each channel

Multifunction output user definable or automatically selected to be any of the following:

Waveform sync （all waveforms）

A square wave with 50 % duty cycle at the main waveform frequency, or a pulse coincident with the first few points of an arbitrary waveform

Position markers

Any point（s） on the waveform may have associated marker bit（s） set high or low

Burst done

Produces a pulse coincident with the last cycle of a burst.

Sequence sync

Produces a pulse coincident with the end of a waveform sequence.

Trigger

Selects the current trigger signal. Useful for synchronizing burst or gated signals.

Sweep sync

Outputs a pulse at the start of sweep to synchronize an oscilloscope or recorder.

Phase lock out

Used to phase lock two generators. Produces a positive edge at the 0 ° phase point.

Output signal level

TTL/CMOS logic levels from typically 50 ?.

Cursor/marker out

	Adjustable output pulse for use as a marker in sweep mode or as a cursor in arbitrary waveform editing mode. Can be used to modulate the Z axis of an oscilloscope or be displayed on a second ‘scope channel.
	Output Signal Level: Adjustable from nominally 2 V to 14 V, normal or inverted; adjustable width as a cursor.

Output impedance

600 ? typical

Inputs

Trig In

Frequency range

DC to 1 MHz

Signal range

Threshold nominally TTL level; maximum input ± 10 V

Min. pulse width

50 ns, for Trigger/Gate; 50 us for Sweep mode

Polarity

Selectable as high/rising edge or low/falling edge

Input impedance

10 k?

Modulation In

Frequency range

DC to 100 kHz

VCA signal range

Approximay 1 V pkpk for 100 % level change at maximum output

SCM signal range

Approximay ± 1 V pk for maximum output

Input impedance

Typically 1 k?

Sum In

Frequency range

DC to 8 MHz

Signal range

Approximay 2 V pk-pk input for 20 V pk-pk output

Input impedance

Typically 1 k?

Hold

Holds an arbitrary waveform at its current position. A TTL low level or switch closure causes the waveform to stop at the current position and wait until a TTL high level or switch opening which allows the waveform to continue. The front panel MAN HOLD key or remote command may also be used to control the Hold function. While held the front panel MAN TRIG key or remote command may be used to return the waveform to the start. The Hold input may be enabled independently for each channel.

Input impedance

10 k?

Ref Clock In/Out

Set to input

Input for an external 10 MHz reference clock. TTL/CMOS threshold level.

Set to output

Buffered version of the internal 10 MHz clock. Output levels nominally 1 V and 4 V from 50 ?

Set to phase lock

Used together with SYNC OUT on a master and TRIG IN on a slave to synchronise （phase lock） two separate generators.

Inter-Channel Operation

Inter-Channel Modulation

The waveform from any channel may be used to Amplitude Modulate （AM） or Suppressed Carrier Modulate （SCM） the next channel. Alternatively any number of channels may be Modulated （AM or SCM） with the signal at the MODULATION input socket.

Carrier frequency

Entire range for selected waveform

Carrier waveforms

All standard and arbitrary waveforms

Modulation types: AM

Double sideband with carrier. SCM: Double sideband suppressed carrier

Modulation source

Internal from the previous channel. External from Modulation input socket. The external modulation signal may be applied to any number of channels simultaneously.

Frequency range

DC to > 100 kHz

Internal AM depth

0 % to 105 %.

Internal AM resolution

1 %

Carrier suppression （SCM）

> 40 dB

External modulation signal range

VCA: Approximay 1 V pk-pk for 100 % level change at maximum output

SCM

Approximay ± 1 V pk for max. output

Inter-Channel Analogue Summing

Waveform Summing sums the waveform from any channel into the next channel. Alternatively any number of channels may be summed with the signal at the SUM input socket.

Carrier frequency

Entire range for selected waveform

Carrier waveforms

All standard and arbitrary waveforms

Sum source

Internal from the previous channel. External from SUM IN socket.

Frequency range

DC to > 8 MHz

Ext. signal range

Approx. 5 V pk-pk input for 20 V pk-pk output

Inter-Channel Phase Locking

Two or more channels may be phase locked together. Each locked channel may be assigned a phase angle relative to the other locked channels. Arbitrary waveforms and waveform sequences may be phase locked but certain constraints apply to waveform lengths and clock frequency ratios.
With one channel assigned as the Master and other channels as Slaves a frequency change on the master will be repeated on each slave thus allowing multiphase waveforms at the same frequency to be easily generated. DDS waveforms are those with 7 digits of frequency setting resolution, while Non-DDS waveforms have 4 digits.

Phase resolution Non-DDS waveforms

DDS waveforms: 0.1 degree or 360 degrees/number of points whichever is the greater

Phase error

	< ± 10 ns all waveforms
	The signals from the REF IN/OUT socket and the SYNC OUT socket can be used to phase lock two instruments where more than 4 channels are required.

Inter-Channel Triggering

Any channel can be triggered by the previous or next channel. The previous/next connections can be used to ‘daisy chain’ a trigger signal from a ‘start’ channel, through a number of channels in the ‘chain’ to an ‘end’ channel. Each channel receives the trigger out signal from the previous （or next） channel, and drives its selected trigger out to the next （or previous） channel.
The ‘end’ channel trigger out can be set up to drive the ‘start’ channel, closing the loop. In this way, complex and versatile interchannel trigger schemes may be set up. Each channel can have its trigger out and its output waveform set up independently. Trigger out may be selected from Waveform End, Position Markers, Sequence Sync or Burst Done.
Using the scheme above it is possible to create a sequence of up to 64 waveform segments, each channel producing up to 16 segments and all channels being summed to produce the complete waveform at the output of channel 4.

Interfaces

RS-232

Variable Baud rate, 9600 Baud maximum

IEEE-488

Conforms with IEEE488.1 and IEEE488.2

Software included

Windows™-based software for waveform creation, editing and management is supplied. Instrument drivers LabView and LabWindows CVI drivers are either supplied with the instrument or are available via your local Fluke office

General Specifications

Display

20 character x 4 row alphanumeric LCD

Data entry

Keyboard selection of mode, waveform etc.; value entry direct by numeric keys or by rotary control

Stored settings

	Up to 9 complete instrument setups may be stored and recalled from battery-backed memory.
	Up to 100 arbitrary waveforms can also be stored independent of the instrument settings.

Size

130 mm （3 U） height; 335 mm long; width 350 mm （282/284）, 212 mm （281）

Weight

7.2 kg. （16 lb）（282/284）; 4.1 kg （9 lb）（281）

Power

230 V, 115 V or 100 V nominal 50/60 Hz, adjustable internally; operating range ± 14 % of nominal;100 VA max. for 4 channels, 75 VA max. for 2 channel, 40 VA max. for 1 channel. Installation Category II.

Operating range

+5 °C to 40 °C, 20-80 % RH

Storage range

–20 °C to + 60 °C

Environmental

Indoor use at altitudes to 2000 m, Pollution Degree 2

Options

19-in rack mounting kit

Safety

Complies with EN61010-1

EMC

Complies with EN61326

熱門產品

產品名稱	參考價	地區	公司名稱	更新時間
出租租賃電子測時儀，時間間隔測量儀	面議	北京市	北京北信創展自動化技術有限公司	2017-09-30	在線詢價
電子測時儀時間間隔測量儀 C4燃速爆速測量儀導爆管導爆嗦間隔測量儀	面議	北京市	北京北信科遠儀器有限責任公司	2021-05-13	在線詢價
電子透氣測試儀氣流流速檢測儀電子透氣測量儀	面議	北京市	北京北信科遠儀器有限責任公司	2021-05-13	在線詢價
電極式電子水尺，橋洞隧道水位測量預警	￥1500	邯鄲市	藍控科技（邯鄲）有限公司	2024-02-26	在線詢價
PF600便攜式發電機定子流量測試儀	面議	上海市	上海洪富儀器儀表有限公司	2023-09-18	在線詢價
USB電子測量顯微鏡	面議	贛州市	贛州宏泰儀器設備有限公司	2022-12-16	在線詢價

免責申明

所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，儀表網對此不承擔任何責任。儀表網不涉及用戶間因交易而產生的法律關系及法律糾紛，糾紛由您自行協商解決

友情提醒：本網站僅作為用戶尋找交易對象，就貨物和服務的交易進行協商，以及獲取各類與貿易相關的服務信息的平臺。為避免產生購買風險，建議您在購買相關產品前務必確認供應商資質及產品質量。過低的價格、夸張的描述、私人銀行賬戶等都有可能是虛假信息，請采購商謹慎對待，謹防欺詐，對于任何付款行為請您慎重抉擇！如您遇到欺詐等不誠信行為，請您立即與儀表網聯系，如查證屬實，儀表網會對該企業商鋪做注銷處理，但儀表網不對您因此造成的損失承擔責任！