| Bolting measurement of screwbolt | |
| ● TORQUE TESTER DIS-RL series | |
| Separate type merit! | |
| DIS-RL05 To measurement of the minute torque of 500 or less mN-m Since the detection part was smalla light weight, minute torque measurement which needs prudence for handling was enabled. | |
| DIS-RL2 Measurement to 2N・m It is easy to use measuring range widely. | |
| DIS-RL6 | |
| A new function is carried (1) Display Board Became Legible. (A Measurement modea unit. Other coded data is displayed.) (2) Fault charge protection loading. It is pilot-lamp lighting during charge. | |
| The main functions (DIS series) □ Yes-no decision □ Average calculation □ Data storage is 800 affairs. □ A convenient functional setup of a setup of a measurement start value etc. □ Data output at real time (every about 1/180 seconds). □ USB terminal data output | |
| Specification | DIS-RL05 | DIS-RL2 | DIS-RL6 | |||
| Measuring range | 2.0～500 mN･m 0.020～5 kgf・cm 0.020～4.5 lbf・in | 0.020～2 N･m 0.20～20 kgf・cm 0.20～18 lbf・in | 0.20～6 N･m 2.0～60 kgf・cm 2.0～54lbf・in | |||
| Accuracy | ±0.5% (or less 499±3digit) | |||||
| Display | The 4 figures digital display of LCD | |||||
| The measurement direction | CW-CCW (rightleft) | |||||
| Measuring mode | P-P Peak | Peak load value hold. | ||||
| T-R Track | Indication of real time torque value. | |||||
| P-D Peak down | Holding Load Value at the moment to change from upward to downword | |||||
| C Real-time output | Load torque value is outputted every about1/ 180 second by RS232C. | |||||
| Decision function | Setting of torque value | A topa minimum value are in a measuring range,a setup is possible. Can confirm the set value by the buzzer sound or LED. | ||||
| The Maximum, the minimum,the average value | Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels. | |||||
| clearance | It is a display clearance in set-up time. (0.5 - 3.0 sec) | |||||
| One-touch zero | A clear button is pushedit is a zero. data output. | |||||
| Data spec. | Data transfer | ASCII format (Baud rate : 19200) | ||||
| Data memory | 800 data stored | |||||
| Power supply | Ni-Cd chargeable battery 1.2V×4cells 450mAh | |||||
| Auto power save | 10 minutes no use, automatically switch off. | |||||
| Charging time | about 3hours | |||||
| Continunous working time | 10 hours | |||||
| Meter outside type dimension | 100(W) x105(D) x33 (H) (It does not contain by the projection thing.) | |||||
| Weight | Meter part 520g | |||||
| Bit/Socket part | Φ4 | HEX 6.35 | ||||
| Accessories | Φ4 bits (＋) ♯0/♯1 | 6.35HEX bits (＋) ♯1/♯2 | ||||
| Receipt case | ||||||
| AC/DC adaptor | ||||||
| An inspection report, a proofreading certificate, a traceability system figure | ||||||
