氟塑料絕緣耐高溫控制電纜Fluoroplastics Insulated Heat Resisting Control Cable

一、產品特點及用途

本產品適用于交流額定電壓600/1000V及以下控制、監控回路以及電器儀表的連接線和自動控制系統的傳輸線。產品具有耐油、防水、耐磨、耐酸堿及各種化學試劑(除氯仿外)和各種腐蝕性氣體、耐老化、不燃燒等優異性能:本產品主要適用于冶金、電力、化工、石油等工礦企業在高溫、低溫及各種惡劣環境中作電器、儀表的連接線和自動控制系統的傳輸線。氟塑料絕緣和護套耐高溫控制電纜采用聚全氟乙丙烯或改性聚四氟乙烯材料，產品具有比普通控制電纜更高的耐熱等級

Product Characteristic and Application

It is used as connection cable for electric appliances& instruments and transmission cable for automatic control system in controlling and supervising loop of A.Crated voltage of 600/1000V or lower.It has good featureof oil resistance.abrasion resistance. acid & alkali resistance.various chemical reagent(except chloroform)ａnd corrosive gas resistance, aging resistance and badweather resistance etc. It is used as connection cable forelectric appliances & instruments and transmission cablefor automatic control system under bad environment ofextreme temperature mainly in the field of metallurgypower, chemical and petroleum enterprises. F46 or Teflon insulation material is adopted by control cable withfluoroplastics insulation & sheath and high temperatureresistance. It has better heat resistant degree comparedwith common control cable.

二、執行標準

采用企業標準和TICW/03-2009

Executive standard:

enterprise standard and TICW/03-2009

三、產品使用特性

1、交流額定電壓:U。/U為450/750V、600/1000V:

2、電纜導體長期允許工作溫度為:

氟塑料外護層為200℃/260℃:

聚氯乙烯外護層為105℃;

硅橡皮外護層為180℃。

3、電纜的敷設溫度應不低于:

聚氯乙烯護套電纜0℃;

硅橡皮護套電纜-20℃:

氟塑料護套電纜-20℃。

4、電纜推薦允許彎曲半徑:

無鎧裝層的電纜,應不小于電纜外徑的6倍;

有鎧裝層的電纜或帶銅帶屏蔽結構的電纜,應不小于電纜外徑的12倍:

有屏蔽層結構的軟電纜,應不小于電纜外徑的6倍氟塑料絕緣護套材料的電纜應不小于電纜外徑的8倍

Performance for Usage

1.A.C.rated voltage U0/U: 450/750V、600/1000V;

2.Long-term working temperature of cable conduc- tor:

Temperature of fuoroplastic outer protecting layer is 200℃/260℃;

Temperature of PVC outer protecting layer is 105℃.

Temperature of silicon rubber outer protecting layer is 180℃;

3. Temperature for installing cable is no lower than:

0℃ for cable with PVC sheath;

-20℃ for cable with silicon rubber sheath;

-20℃ for cable with fluoroplastic sheath;

4. Bending radius allowed by cable:

It is no less than 6 times that of cable OD for cable withinarmored layer;

It is no less than 12 times that of cable OD for cable witharmored layer or copper tape shielding;

It is no less than 6 times that of cable OD for soft cablewith shielding structure;

lt is no less than 8 times that of cable OD for cable withfluoroplastic insulation and sheath;

四、電纜型號及名稱Type and Description

1、基本型號及名稱 Basic Tvpe and Description

2、型號結構組合形式 Type-naming Indication

五、代號名稱及含義 Codes Meaning

注:可根據用戶需要生產、設計特殊規格和型號電纜。

Note: we also produce cable with special specification and type according to the requirement of customer.

六、電纜的結構圖如下所示 The figure of cable structure

七、電纜的規格如下表所示 Specification of Cable in Following Table

八、主要技術指標 Main TechnicalIndices