變功率電熱帶
變功率電熱帶
Variable watt heating cable
RDL型變功率電熱帶,其工作原理,產品結構及應用場合與RDP2-J3,RDP3-J3型恒功率電熱帶相同,所不同的是其絕緣材料采用了耐溫高于F46的PFA氟塑料,發熱絲采用具有自控溫特性的材料,所以它具有正溫度特性,即其輸出功率隨介質溫度的升高而降低,其流體維持溫度可達180-250℃,該產品可用于二廠一區,二區爆炸氣體混合物T3組場所。
Model RDL variable watt heating cable works in the same way as Model RDP2-J3 and RDP3-J3 , except that its insulation is PFA fluroplastic which endures higher temperature than F46 , and the heating fiber is automatic in temperature control . the output watt reduces when the temperature is going up . The liquid temperature is kept at 180-250℃ . That cable is applicable in the area 1 and area 2 where there is explosive gas mixture T3 .
單位長度功率 Unit length watt: W/m |
絕緣層代號:J6-PFA氟塑料 Insulation layer code: fluroplastic. |
Q:加強型,普通型(省略)Reinforced, common(omitted) |
2:芯數2單相220V 工作電壓 2 core no., single phase 220V working voltage |
RDL:變功率電熱帶 Variable watt heating cable |
RDP |
□
|
(Q) |
-J6- |
□ |
例:EX:RDL2-J3:表示40W/m的變功率電熱帶。
For example:RDL2-J3 stands for 40w/m variable heating cable
規格及主要技術特性 Dimension and main technical features
產品型號 Model | 額定電壓 Rated voltage(V) | 額定功率 Rated watt (W/m) | 使用長度 Max. usable length(m) | 流體維持溫度 Max. holding temperature for the liquid(℃) | |
普通型 Common | 加強型 Reinforced | ||||
RDP2-J6-40 | RDP2(Q)-J6-40 | 220 | 40 | 130 | 180 |
RDP2-J6-60 | RDP2(Q)-J6-60 | 220 | 60 | 100 | 205 |
RDP3-J6-40 | RDP3(Q)-J6-40 | 380 | 40 | 275 | 180 |
RDP3-J6-60 | RDP3(Q)-J6-60 | 380 | 60 | 240 | 205 |
注:流體維持溫度,是指管道內介質需要維持的工作溫度,一般不宜超過本表規定值。
Note: The maximum holding temperature refers to the max temperature of the liquid in the pipes, and not exceeding that stated in the table.
常態絕緣電阻:≧50MΩ/hm Normal insulation resistance: ≧50MΩ/hm
介電強度:-2500V50Hz/1min Dielectric strength: -2500V50Hz/1min
電熱帶耐溫:260℃ Max. temperature: 260℃
功率,溫度曲線圖 Watt-temperature figure
1、本產品具有可變功率,能根據管線溫度自動調整,故使用本產品能節約能源。 2、本產品能適用于維持較高溫度的液體介質。 | 1、The cable is variable in watt output and automatically regulates following the pipeline temperature. So the it will save the energy to use this cable. 2、The cable can hold the higher temperature of the liquid. |