85040系列拉壓力傳感器
耐用，非常精確，長久耐用，適用于靜態和動態力，側向力靈敏度極低，防護等級高，不銹鋼
-
Features
- 量程范圍從 0 ... 20 N 到 0 ... 2 MN
- 適合靜態和動態測試
- 測量精度≥ 0.1 % F.S.
- 不容易受到側向力影響
- 型號85073/85075適用于高頻動態測試，85070系列可承受1億次測試循環
- 可擴展溫度補償范圍從-55°C...+120°C（選配）
- 保護等級IP 68 （選配）
-
Product data
型號 85041，85043, 85073，85075 量程范圍 85041 0 … 20 N
0 … 50 N
0 … 100 N
0 … 200 N
0 … 500 N
0 … 1 kN
0 … 2 kN
0 … 5 kN
0 … 10 kN
0 … 20 kN
0 … 50 kN
0 … 100 kN
0 … 200 kN
0 … 500 kN
0 … 1 MN
0 … 2 MN 85043 0 … 20 N
0 … 50 N
0 … 100 N
0 … 200 N
0 … 500 N
0 … 1 kN
0 … 2 kN
0 … 5 kN
0 … 10 kN
0 … 20 kN
0 … 50 kN
0 … 100 kN
0 … 200 kN
0 … 500 kN
0 … 1 MN
0 … 1,5 MN
0 … 2 MN 85073 0 … 200 N
0 … 500 N
0 … 1 kN
0 … 2 kN
0 … 5 kN
0 … 10 kN
0 … 20 kN
0 … 50 kN
0 … 100 kN
0 … 200 kN
0 … 500 kN
0 … 1000 kN 85075 0 … 200 N
0 … 500 N
0 … 1 kN
0 … 2 kN
0 … 5 kN
0 … 10 kN
0 … 20 kN
0 … 50 kN
0 … 100 kN
0 … 200 kN
0 … 500 kN受力方向 85041 & 85075
拉力和壓力
85043 & 85073
壓力標準化信號 No 信號輸出 2 mV/V
3 mV/V
取決于量程大小保護等級 IP64 (可選配 IP68) 過載保護 No 拉盤 85041 & 85075
Yes
85043 & 85073
No受力壓頭 No 使用溫度范圍 -55 ... +120 °C 具體特點 85041 & 85043 適合一般靜態和動態測試
85073 & 85075
合適頻率的高動態測試 -
Description
These load cells feature an outstanding ability to withstａnd static and dynamic stress and have exceptional precision and service life. These products have a huge range of applications in industry, R+D and testing thanks to the optional IP68 degree of protection and low sensitivity to lateral forces.
Examples of applications would be the measurement of:
Insertion forces
Reference measurement
Weights (e.g. silos, skips)
Tensile forces (tension in cables, chains etc. with load centering plate)
Materials testing
For the compressive force sensors (models 85043 and 85073) the force must be applied through a plane plate, hard enough for the range of forces being measured, or a piston.
The force-sensitive diaphragm with fitted strain gauges is located between the central part, where the force is applied (force application), and the outer ring (containing fixing holes).
Two support diaphragms are additionally fitted, above and below the actual measuring element, to desensitize the sensors to extraneous lateral forces or moments. (see ?Permitted external forces“ on page 2).
Models 85041/85075 (tension/compression) are calibrated in the tensile direction. The characteristic figure for the compression direction can nominally vary by ± 0.25 % from the figure for the tensile direction. The output signal is positive when the applied force is tensile.
The 8507X series (models 85073 and 85075) is designed for the highest possible dynamic stress and service life. This is > 109 cycles from zero up to the full value of the measuring range in the tensile or compressive direction and tolerates a maximum operational force of up to 200 % of the nominal range. -
Downloads
Data sheet
85040系列參數資料 EN -
Accessories
Rod ends with internal/external thread for force introduction DE -
LINKS & CAD DATA
Related products
8431,8432系列
