|
It has the same appearance and dimension as bridge load cell produced by KUBOTA Co. (Japan). Two ends are fixed between elastomer and pedestal bearing load with steel ball in midway of beam, it can recover and correct core automatically, so has good ability for resisting lateral and impacting load and high accuracy. It has reliable multi-layers pouring pastern for sealing and fine surface treating. Using high quality cable it can work steadily for long time in bad condition. It is suitable for electronical truck scales, rail scales, hopper scales and various weighing scales etc.
量程范圍(Scaling Range [t]):10, 15, 20, 25, 30, 40 , 50
準確度等級(Accuracy Degree):0.02 (C3級)
材質(Material): 合金結構鋼
技術指標 (Technical Specification):
技術參數 Technical parameter | 單位 Unit | 技術指標 Specification |
輸出靈敏系數Sensitivity | mV/V | 2±0.004 |
非線性Nonlinearity | % F.S | 0.02 |
重復性Repeatability | % F.S | 0.01 |
滯后Hysteresis | % F.S | 0.02 |
蠕變Creep(30min) | % F.S | 0.02 |
零點輸出Zero balance | % F.S | ±1 |
零點溫漂Temp. Effect on zero signal | % F.S /10℃ | 0.02 |
靈敏系數溫漂Temp. Effect on sensitivity | % F.S /10℃ | 0.02 |
溫度補償范圍Temp. Compensation range | ℃ | -10 ~ +55 |
安全溫度范圍Safe temp. range | ℃ | -20 ~ +70 |
輸出阻抗Output resistance | Ω | 700±5 |
輸入阻抗Input resistance | Ω | 770±30 |
絕緣電阻Insulation resistance | MΩ | >5000 |
推薦激勵電壓Nominal excitation voltage | V DC/AC | 10 |
激勵電壓Max. Excitation voltage | V DC/AC | 20 |
安全過載Safe load limit | % F.S | 150 |
極限過載Breaking load | % F.S | 300 |
電纜長度Cable length | m(四芯屏蔽電纜) | 13(或根據用戶要求) |
[注:本系列產品統一外形安裝尺寸。Note: The series has the same mounting dimension. ]
外形安裝尺寸(Mounting Dimension):
尺寸(mm) 量程(t) | B | C | D | E | F | G | FK | Fd |
10~30 | 80 | 125 | 240 | 100 | 135 | 229 | 30 | 18 |
50 | 124 | 160 | 340 | 124 | 160 | 251 | 40 | 21 |
配套附件(Accessory):鋼球承載套件。Bearing steel ball set.
選配附件(Option):橡皮防塵罩。Rubber proof dust cover.
其他說明(Note):可按用戶要求量程和外形尺寸供貨。
We can supply according to scaling range and shape dimension required by users.
外形安裝尺寸(Mounting Dimension):
|