優勢
節能：通徑結構設計保證最小壓損
較少過程測量點：多參數測量(流量、密度、溫度)
節省安裝空間：無前/后直管段長度要求
完整查看過程信息和診斷信息：提供多種用戶自定義輸入/輸出組合方式和現場總線
降低復雜性和多樣性：用戶自定義輸入/輸出功能
自帶驗證功能：內置Heartbeat Technology (心跳技術)
儀表特點 自排空的單直管測量系統 TMB 技術 測量管材質：鈦 分體式儀表，最多帶4路輸入/輸出 背光顯示，觸摸鍵控制和WLAN訪問 傳感器和變送器通過標準電纜連接 測量原理不受流體物理特性的影響(例如：粘度和密度)。 在低壓損要求和敏感性流體測量應用中進行液體和氣體測量。 Density/Concentration 氣體 粘度 密度 液體 科里奧利質量流量 Combines in-line viscosity and flow measurement with a transmitter remote version with up to 4 I/Os. Measuring liquids and gases in applications requiring low pressure loss and gentle fluid treatment. Energy-saving – full bore design enables minimal pressure loss. Fewer process measuring points – m*riable measurement (flow, density, temperature). Space-saving installation – no in/outlet run needs. Straight, easy-to-clean single-tube system. TMB technology. Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology. Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access. DN 8 to 80 (? to 3") Measuring tube: Titanium grade 9 Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration, viscosity Mass flow (liquid): ±0.10 % 0 to 180 000 kg/h (0 to 6600 lb/min) PN 100, Class 600, 63K –50 to +150 °C (–58 to +302 °F) Standard: –40 to +60 °C (–40 to +140 °F) 1.4301 (304), corrosion resistant AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; Polycarbonat Sensor remote version (standard): IP66/67, type 4X enclosure 4-line backlit display with touch control (operation from outside) 4 outputs: Status input HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA DC 24 V ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC CE, C-tick, EAC marking Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511 Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025) PED, CRN 3.1 material 3-A, EHEDG, cGMP應用領域
特征和規格
測量原理
產品標題
傳感器特點
變送器特點
公稱口徑范圍
接液部件材質
Connection: Titanium grade 2測量變量
測量誤差
Volume flow (liquid): ±0.10 %
Mass flow (gas): ±0.50 %
Density (liquid): ±0.0005 g/cm3測量范圍
過程壓力
介質溫度范圍
環境溫度范圍
Option: –50 to +60 °C (–58 to +140 °F)傳感器外殼材質
Sensor connection housing (standard): AlSi10Mg, coated
Sensor connection housing (option): 1.4301 (304); 1.4404 (316L); 1.4409 (CF3M) similar to 316L變送器外殼材質
防護等級
Sensor remote version (option): IP69. Transmitter remote version: IP66/67, Type 4X enclosure顯示/操作
Configuration via local display and operating tools possible輸出
4-20 mA HART (active/passive)
4-20 mA WirelessHART
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output輸入
4-20 mA input數字通信
電源
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)防爆認證
產品安全性
功能安全性
計量認證和證書
Heartbeat Technology complies with the requirements for traceable verification according to ISO 9001:2008 – Section 7.6 a (TüV attestation)壓力認證和證書
材料證書
衛生型認證和證書
