本公司6月15號10點13分報道： TCGB-21型塑料薄膜和薄片測厚儀原理
（/c149981/products/d.html）
產品簡介
YI、TCGB-21型塑料薄膜和薄片測厚儀簡介：
TCGB-21型塑料薄膜和薄片測厚儀適用于塑料薄膜、薄片的厚度測試，還可適用于紙張、紙板的厚度測試、箔片、硅片、金屬片的厚度測試、紡織材料的厚度測試、固體電絕緣體的厚度測試。
TCGB-21 Thickness Gauge for Plastic Film and Thin Sheet
TCGB-21 type plastic film and thin sheet thickness tester is suitable for plastic film, thin sheet thickness test, but also suitable for paper, cardboard thickness test, foil, silicon, metal sheet thickness test, textile material thickness test, solid electrical insulation thickness test.
技術參數
二、TCGB-21型塑料薄膜和薄片測厚儀產品參數：
二、TCGB-21型塑料薄膜和薄片測厚儀產品參數：
1、分度值0.001mm 量程0-12mm
2、上下測量面為凸/平面時，上測量面的曲率半徑在15-50（mm）時，其測量面對試樣施加的負荷為0.1N到0.5N之間。
3、測量精度
（1）100um以內 精度1um
（2）100um到250um 精度2um
（3）250um以上 精度3um
4、外形尺寸：160x140x200mm
5、重量：1.5kg
TCGB-21 Thickness Gauge for Plastic Film and Thin Sheet
1, the indexing value 0.001mm range 0-12mm
2. When the upper and lower measuring surface is convex/flat, the radius of curvature of the upper measuring surface is 15-50 (mm), and the load applied to the sample on the measuring face is between 0.1N and 0.5N.
3. Measurement accuracy
(1) Accuracy within 100um is 1um
(2) 100um to 250um accuracy 2um
(3) above 250um precision 3um
4. Overall dimension: 160x140x200mm
5. Weight: 1.5kg
使用方法
三、TCGB-21型塑料薄膜和薄片測厚儀使用方法：
三、TCGB-21型塑料薄膜和薄片測厚儀使用方法：
1、測試先把千分表清零，并撥動操縱桿試幾次回零后，再進行測試。操作時輕抬輕放以免損壞測足及儀表。
2、用手指按下操縱桿使測足上抬，將被測物置于工作臺、測足之間。輕放操縱桿，此時表的讀數即被測物的厚度，
3、使用完畢后將儀器裝入盒內并置于干燥處防止受潮。
TCGB-21 type plastic film and thin sheet thickness gauge method of use:
1. Before the test, the dial meter is cleared to zero, and the joystick is moved several times to try to return to zero, and then the test is carried out. Lift and place gently during operation to avoid damage to the gauge and instrument.
2. Press the joystick with your finger to lift the measured foot, and place the measured object between the workbench and the measured foot. Gently place the joystick and the meter will read the thickness of the object being measured.
3. After use, put the instrument into a box and place it in a dry place to prevent moisture.
主營產品：土工檢測儀器,防水材料檢測儀器,陶瓷磚檢測儀器,水利水電粗粒土系列,瀝青儀器檢測儀器
Main products: geotechnical testing instrument, waterproof material testing instrument, ceramic brick testing instrument, water conservancy and hydropower coarse-grained soil series, asphalt testing instrument
更新時間：2023/2/3 11:51:58
