Product #: 09120=A=0011
Self monitoring functions Bad sensor connection Defective temperature
- Calibration conditions
- Conductivity to validity concentration calculation; value too
- low or too high (only relevant for the POLYMETRON 9125)
POLYMETRON 9120 dual channel transmitter
The POLYMETRON 9120 dual channel transmitter reduces
acquisition and installation costs by the drastic reduction
of panel space required. Additional calculations are offered
between both conductivity channels (C1 and C2) allowing
better process understanding and control operations:
difference (C1-C2), ratio (C1/C2), percentage accepted
(C2/C1)*100 and percentage rejected
(1-C2/C1)*100.
Dual conductivity transmitter
Service spare NO
| 09120=A=0000 | 9120 dual conductivity transmitter |
| 09120=A=0004 | 9120 dual conductivity + 4-relay board |
| 09120=A=0011 | 9120 dual conductivity + RS485 |
| 09120=A=0012 | 9120 dual conductivity + Profibus DP |
| 09120=A=0015 | 9120 dual conductivity + 4-relay and RS485 boards |
| 09120=A=0016 | 9120 dual conductivity + 4-relay and Profibus DP |
| 09120=A=0020 | 9120 dual conductivity (24 V) |
| 09120=A=0024 | 9120 dual conductivity + 4-relay board (24V) |
| 09120=A=0031 | 9120 dual conductivity + RS485 board (24 V) |
| 09120=A=0032 | 9120 dual conductivity + Profibus DP (24 V) |
| 09120=A=0035 | 9120 dual conductivity + 4-relay + RS485 (24 V) |
| 09120=A=0036 | 9120 dual conductivity + 4-relay board and Profibus DP (24 V) |
| 09120=A=0500 | Equipped shield plate with earth terminal and fixing system for conductivity low voltage transmitters 9120 |
| 09120=A=0520 | Equipped shield plate with earth terminal and fixing system for conductivity transmitters 9120 |
| 09120=A=1500 | Dual conductivity measuring board |
| 09120=A=3000 | 9120 dual conductivity transmitter tropicalised |
| 09120=A=6200 | Replacement kit with a 91XX CPU board programmed with dual conductivity firmware and mounting instructions. |
| 09120=A=8005 | 5m cable and IP65 connector for cond probe and 9120/23 |
| 09120=A=8010 | 10m cable and IP65 connector for cond probe and 9120/23 |
| 09120=A=8020 | 20m cable and IP65 connector for cond probe and 9120/23 |
| 09120=T=0000 | 9120 transmitter test certificate |
