記錄型分貝儀SL-4023SD特征
*主要功能設計符合IEC 61672-2級標準。
*標準加權網絡符合標準。
* 0.5“標準麥克風頭。
*時間加權(快-慢)動態特性模式。
*建立外部校準VR。。
*自動范圍和手動范圍選擇。
*可用于外部校準調整。
*高精度、長期穩定的電容傳聲器。
*存儲和最小值的內存功能。
*峰值保持功能。
*SD記憶卡實時Datalogger記錄,它內置時鐘和日歷,實時數據記錄器,采樣時間:1秒到3600秒。
*手動數據可用(設置采樣時間0秒),在執行手動數據采集器的功能,可以設置不同的位置(位置)號(1位到99位)。
*創新型設計,易于操作,計算機不需要設置額外的軟件,執行數據采集器時,只是把SD卡從表和插入SD卡插入電腦,可以下載的所有測量值和時間信息(年/月/日/時/分/秒)到Excel,然后用戶可以自己進行進一步的數據或圖形分析。
* SD卡容量:1 GB到16 GB。
* LCD背光燈綠色,易于閱讀。
*能自動關機或手動關機。
*數據保持,記錄和最小讀數。
*微機電路,高精度。
* UM3 AA電源(1.5 V)x 6電池或直流9V適配器。
* PC機接口。
*重型及小型外殼
記錄型分貝儀SL-4023SD規格
Circuit | Custom one-chip of microprocessor LSI circuit. |
Display | LCD size : 52 mm x 38 mm LCD with green backlight ( ON/OFF ). |
Measurement Range | 30 - 130 dB. |
Resolution | 0.1 dB. |
Function | dB ( A & C frequency weighting ), Time weighting ( Fast, Slow ), Peak hold, Data hold Record ( Max., Min. ). |
Accuracy (23 ± 5 ℃) | Characteristics of " A " frequency weighting network meet IEC 61672 class 2. Under 94 dB input signal, the accuracy are : 31.5 Hz ± 3.5 dB 63 Hz ± 2.5 dB 125 Hz ± 2.0 dB 250 Hz ± 1.9 dB 500 Hz ± 1.9 dB 1 K Hz ± 1.4 dB 2 K Hz ± 2.6 dB 4 K Hz ± 3.6 dB 8 K Hz ± 5.6 dB Remark : The above spec. are tested under the environment RF Field Strength less than 3 V/M & frequency less than 30 MHz only. |
Frequency Weighting Network | Characteristics of A & C. A weighting : The characteristic is simulated as "Human Ear Listing" response. Typical, if making the environmental sound level measurement, always select to A weighting. C weighting The characteristic is near the "FLAT" response. Typical, it is suitable for checking the noise of machinery (Q.C. check) & knowing the sound pressure level of the tested equipment. |
Data hold | To freeze the measurement value. |
Peak hold | To keep the peak ( max. ) measurement value. |
Time weighting (Fast & Slow) | Fast - t= 200 ms * "Fast" range is simulated the human ear response time weighting. Slow - t = 500 ms * "Slow" range is easy to get the average values of vibration sound level. | |||||||
Range selector | Auto | range | : | 30 | to | 130 | dB. | |
Manual range : 3 range, 30 to 80 dB, 50 to 100 dB, 80 to 130 dB, 50 dB on each step, with over & under range indicating. | ||||||||
Frequency | 31.5 to 8,000 Hz. | |||||||
Microphone type | Electric condenser microphone. | |||||||
Microphone size | Out size, 12.7 mm DIA. ( 1/2 inch). | |||||||
Calibration VR | Build in external calibration VR, easy to calibrate on 94 dB level by screw driver. * Calibrated via external SOUND CALIBRATOR ( SC-941, optional ). | |||||||
Calibrator | B & K (Bruel & kjaer), MULTIFUCTION ACOUSTIC CALIBRATOR 4226. | |||||||
Datalogger Sampling Time Setting range | Auto | 1 second to 3600 seconds @ Sampling time can set to 1 second, but memory data may loss. | ||||||
Manual | Push the data logger button once will save data one time. @ Set the sampling time to 0 second. @ Manual mode, can also select the 1 to 99 position ( Location ) no. | |||||||
Memory Card | SD memory card. 1 GB to 16 GB. | |||||||
Advanced setting | * Set clock time ( Year/Month/Date, Hour/Minute/ Second ) * Decimal point of SD card setting * Auto power OFF management * Set beep Sound ON/OFF * Set sampling time * SD memory card Format | |||||||
Over Indication | Show " ". | |||||||
Data Hold | Freeze the display reading. | |||||||
Memory Recall | Maximum & Minimum value. | |||||||
Sampling Time of Display | Approx. 1 second. | |||||||
Data Output | RS 232/USB PC computer interface. * Connect the optional RS232 cable UPCB-02 will get the RS232 plug. * Connect the optional USB cable USB-01 will get the USB plug. | |||||||
Power off | Auto shut off saves battery life or manual off by push button. | |||||||
Operating Temperature | 0 to 50 ℃. | |||||||
Operating Humidity | Less than 85% R.H. | |||||||
Power Supply | * Alkaline or heavy duty DC 1.5 V battery ( UM3, AA ) x 6 PCs, or equivalent. | |||||||
* DC 9V adapter input. ( AC/DC power adapter is optional ). | ||||||||
Power Current | Normal operation ( w/o SD card save data and LCD Backlight is OFF) : Approx. DC 8.5 mA. | |||||||
When SD card save the data but and LCD Backlight is OFF) : Approx. DC 30 mA. | ||||||||
* If LCD backlight on, the power consumption will increase approx. 14 mA. | ||||||||
Weight | 489 g/1.08 LB. | |||||||
Dimension | 245 x 68 x 45 mm. ( 9.6 x 2.7x 1.9 inch ). | |||||||
Accessories Included | * Instruction manual. 1 PC | |||||||
Optional Accessories | * Sound calibrator ( 94 dB ), SC-941. * Sound calibrator ( 94/114 dB ), SC-942. * Sound wind shield ball, SB-01 * SD Card ( 1 GB ) * SD Card ( 2 GB ) * USB cable, USB-01. * RS232 cable, UPCB-02. * Data Acquisition software, SW-U801-WIN. * AC to DC 9V adapter. * Soft carrying case, CA-05A. * Hard carrying case, CA-06. |