ü 雙通道 600 MHz 任意波形發生器
ü 14 位垂直分辨率,每通道兩個標記,1.8 GSa/s
ü 每通道 128MSa存儲度數
ü 使用內部和外部相位參考的調幅
ü 雙通道 600 MHz 信號輸入,帶示波器和可選檢測功能選件
ü 低延遲觸發和序列分支的交叉觸發功能
Channels | 2 |
D/A conversion | 14 bits, 1.8 GSa/s 1,2 |
Waveform memory | 128 MSa per channel 1,2 |
Sequence length | 1024 instructions in core memory + dynamic extension |
Output modes | Amplitude modulation, direct output, 4-channel aux output |
Conditional branching | 32-bit digital input, trigger input, internal trigger (lock-in, scope, counter) |
Conditional branching | < 1 µs |
Sequencer output | UHF analog output, 2 markers/channel, 32-bit digital output, auxiliary output |
Trigger delay to output | < 150 ns |
Trigger uncertainty | 2.2 to 4.4 ns |
UHF Signal Output
Frequency range | DC - 600 MHz |
Output ranges | ±150 mV, ±1.5 V (DC-coupled 50 Ω) |
Number of oscillators | 2 (8 with UHF-MF option) |
Phase noise | -120 dBc/Hz (10 MHz, offset 100 Hz), -130 dBc/Hz (10 MHz, offset 1 kHz) |
Random jitter (RMS) | 4.5 ps (100 MHz, 6 dBm sine) |
2 For non-repetitive waveforms longer than 32 kSa played on both output channels simultaneously, the maximum sampling rate is 900 MSa/s.
拓展功能
UHF-DIG 數字轉換器功能選件
UHF-MF 多頻解調功能選件
UHF-MOD AM/FM 調制功能選件
UHF-LIA 鎖相放大器功能選件
UHF-BOX Boxcar 平均器功能選件
UHF-RUB 銣原子鐘功能選件
UHF-CNT脈沖計數功能選件
ü 電路量子電動力學
ü 捕獲離子實驗
ü 量子點
ü 核磁共振波譜/電子順磁共振波譜
ü 雷達/激光雷達
ü 混合信號設備測試
ü 掃描振動測量
ü 編碼脈沖頻響分析儀(無遺漏 FFT)
ü 頻帶激勵掃描探針顯微鏡
ü 電泵探針