l 寬動態范圍高達80 dB
l 直流耦合輸入
l 可切換的輸入范圍為±20 µV至±200 mV和±200 µV至±2V
l 上升/下降時間5 ns
l 輸入噪聲2 nV /√Hz
l 本地和遠程控制
l 集成采樣并保持基線校正
輸入偏移
HLVA-100提供了三種輸入失調電壓校正(基準線校正)的可能性。這三種方法都可以去除與溫度漂移有關的失調和較小的電源電壓失調:
手動調整空值
通過±10 V控制電壓進行遠程零位調節
基線校正循環以執行遠程自動清零
Model | HLVA-100 | |
Input Voltage Range | from ±20 µV to ±200 mV and from ±200 µV to ±2 V | |
Dynamic Range | Typ. 60 dB (for accurate amplitude measurement) | |
Scaling | 12.5 mV/dB, 250 mV/decade (@ 50 Ω load) | |
Linearity | ±1 dB (for pulse of min. 20 ns pulse width) | |
Input Noise Voltage | 2 nV/√Hz | |
Input Voltage Drift | 0.6 µV/°C | |
Input/Output | 50 Ω, BNC | |
Rise/Fall Time | 5 ns @ 40 dB step | |
Output Voltage Range | from +50 to +1075 mV typ. @ 50 Ω load | |
Output Offset Voltage Range | ±500 mV, adjustable by offset-trimpot | |
Baseline Correction | Acquisition time | 30 µs (min. sample pulse width) |
Baseline hold droop rate | 1 µV/s (typ. @ 25°C) | |
Loop cut-off frequency | 1.5 kHz | |
Power supply | ±15 V, +100 mA/?150 mA, | |
Digital Control | TTL, CMOS, opto-isolated |
ü 激光雷達系統
ü 信號壓縮
ü 時間分辨脈沖和瞬態測量
ü 質譜法
ü 粒子檢測