Thorlabs 功率和能量計表頭 帶外部讀出接口
PM103系列表頭兼容我們所有的C系列光電二極管功率和熱釋電能量探頭。
Thorlabs 功率和能量計表頭 帶外部讀出接口
功率和能量計表頭，用于光電二極管功率和熱釋電能量探頭
● 兼容超過20種光電二極管功率和熱釋電能量探頭
● 所有型號可以通過U,S,B 2.0工作
● 可選帶有：
○ UART或RS232接口
○ 模擬輸出
● 通過U,S,B(所有型號)或DA-15接頭(僅PM103)供電
● 包含校準證書
PM103系列表頭兼容我們所有的C系列光電二極管功率和熱釋電能量探頭。我們標準的光電二極管、chao薄光電二極管、積分球和光纖探頭總共可以測量從100 pW到20 W的光功率。另外，也可以使用 zui 大 光電流10 mA、不帶放大且陽極或陰極接地的光電二極管。熱釋電能量探頭可以測量從10 µJ到15 J的能量。也可以使用電壓輸出從20 mV到200 V的能量探頭。雖然所有接口都可通過迷你U,S,B接口由PC進行操作和供電，但有些表頭還有其他功能，如UART或RS232接口和模擬輸出(請見右表)。帶模擬輸出的型號可以在連接電源時自動運行，無需額外的控制設備。所有表頭都包含可以重啟系統的重置按鈕。
Thorlabs 功率和能量計表頭 帶外部讀出接口
每個表頭中的非易失性存儲器在關閉或重啟設備時會保留用戶的波長設置、靈敏度范圍和輸出配置，適合長時間重復測量。100 kS/s的快速讀取速率可以在使用表頭的同時監測有源信號。對于 jing 確 測量，與只有4個電壓范圍和6個電流范圍的PM100U,S,B相比，這些表頭還有從20 mV到200 V的13個電壓測量范圍以及從2 nA到10 mA的21個電流測量范圍(見規格標簽)。
| Power Meter Interface Quick Comparisona | |||
|---|---|---|---|
| Item # | PM103 | PM103A | PM103U |
| Photo (Click to Enlarge) |  |  |  |
| Connectors | Mini U,S,B & DA-15 | Mini U,S,B & SMA | Mini U,S,B |
| Control / Digital Output | U,S,B 2.0, RS232, or UART | U,S,B 2.0 | U,S,B 2.0 |
| Analog Output | Yes | Yes | No |
有關功能的完整比較，請看型號比較標簽。
PM103有2個可配置的通用數字接口DIO1(DA-15 Pin 2)和DIO2(DA-15 Pin 3)。類似地，PM103A有1個帶SMA接頭的輔助數字接口DIO1。以100 kS/s模式讀出數據時，可以將DIO1接口配置為觸發輸出或輸出。DIO2還可配置為pass/fail標志，并通過遠程控制命令查詢。
請注意，這些帶接口的功率計表頭不包含探頭。有關兼容探頭的信息，請參閱下面的探頭描述。Thorlabs為功率計表頭提供重新校準服務，可在下方訂購(型號CAL-PM1)。另外，如果您有相應的探頭需要重新校準，您可以將功率計表頭與探頭一起進行重新校準，無需額外費用。此外，我們提供U,S,B-ABL-60電纜作為每個探頭所附帶U,S,B電纜的替代品；此電纜包含一個M2.5鎖定螺絲，以防止意外斷開連接。
規格
| Sensor Compatibility | ||||
|---|---|---|---|---|
| Item # | PM101 Series | PM102 Series | PM103 Series | PM100USB |
| Sensor Compatibility | ||||
| Compatible Sensor Typesa | Photodiode Power and Thermal Power | Thermal Power and Thermal Position & Power | Photodiode Power and Pyroelectric Energy | Photodiode Power, Thermal Power, and Pyroelectric Energyb |
| Max Photodiode Sensor Current | 5 mA | N/A | 10 mA | 5 mA |
| Max Thermal Sensor Voltage | 1 V | 1 V | N/A | 1 V |
| Max Thermal Position Sensor Voltage | N/A | 1 V | N/A | N/A |
| Max Pyroelectric Sensor Voltage | N/A | N/A | 200 V | 100 V |
| Photodiode Sensor Current Input | ||||
| Units | W, dBm, W/cm2, A | N/A | W, dBm, W/cm2, A | W, dBm, W/cm2, A |
| Current Measurement Range | 6 Decades: 50 nA, 500 nA, 5 µA, 50 µA, 500 µA, 5 mA; Range Selectable in W, Sensor Dependent | N/A | 21 Ranges: nA: 2, 4, 10, 20, 40, 100, 200, 400; μA: 1, 2, 4, 10, 20, 40, 100, 200, 400; mA: 1, 2, 4, 10; Range Selectable in W, Sensor Dependent | 6 Decades: 50 nA, 500 nA, 5 µA, 50 µA, 500 µA, 5 mA; Range Selectable in W or A, Sensor Dependent |
| Current Display Resolution | 1 pA / Responsivity Value (A/W) | N/A | 1 pA / Responsivity Value (A/W) | 1 pA / Responsivity Value (A/W) |
| Current Measurement Uncertainty | ±0.2% Full Scale (5 µA - 5 mA) ±0.5% Full Scale (50 nA) | N/A | ±0.2% Full Scale (400 nA - 10 mA) ±0.5% Full Scale (2 nA - 200 nA); Item # PM103E: ±0.2% Full Scale (100 nA - 10 mA) ±0.5% Full Scale (2 nA - 40 nA) | ±0.2% Full Scale (5 µA - 5 mA) ±0.5% Full Scale (50 nA) |
| Analog Bandwidth | DC - 100 kHz (Dependent on Sensor and Settings) | N/A | DC - 150 kHz Item # PM103E: DC - 100 kHz (Dependent on Sensor and Settings) | DC - 100 kHz (Dependent on Sensor and Settings) |
| Wavelength Correction | nm (A/W) | N/A | nm (A/W) (Item # PM103E: Dependent on Sensor)c | nm (A/W) |
| Beam Area Setting | Diameter 1/e2 or Rectangular x,y | N/A | Diameter 1/e2 or Rectangular x,y | Diameter 1/e2 |
| AD Converter | 16 bit | N/A | 16 bit | 16 bit |
| Thermal Sensor Voltage Input | ||||
| Units | W, dBm, W/cm2, A | N/A | W, dBm, W/cm2, V | |
| Voltage Measurement Range | 9 Ranges: 2, 4, 10, 20, 40, 100, 200, 400, 1000 mV; Range Selectable in W, Sensor Dependent | N/A | 4 Decades: 1, 10, 100, 1000 mV Range selectable in W or V, Sensor Dependent | |
| Voltage Display Resolution | 1 µV / Responsivity Value (V/W) | N/A | 1 µV / Responsivity Value (V/W) | |
| Voltage Measurement Uncertainty | ±0.5% Full Scale (10 mV - 1 V) ±1% Full Scale (2 mV, 4 mV) | N/A | ±0.5% Full Scale (10 mV - 1 V) ±1% Full Scale (1 mV) | |
| Analog Bandwidth | DC - 10 Hz (Dependent on Sensor and Settings) | N/A | DC - 10 Hz (Dependent on Sensor and Settings) | |
| Wavelength Correction | Sensor Dependent; nm (V/W) | N/A | Sensor Dependent; nm (V/W) | |
| Beam Area Setting | Diameter 1/e2 or Rectangular x,y | N/A | Diameter 1/e2 | |
| Pyroelectric Sensor Voltage Input | ||||
| Units | N/A | N/A | J, J/cm2, W, dBm, W/cm2, V | J, J/cm2, W, W/cm2, V |
| Voltage Measurement Range | N/A | N/A | 13 Ranges: mV: 20, 40, 100, 200, 400; V: 1, 2, 4, 10, 20, 40, 100, 200; Ranges Selectable in J; Sensor Dependent | 4 Decades: 0.1, 1, 10, 100 V Range Selectable in J or V, Sensor Dependent |
| Voltage Display Resolution | N/A | N/A | 100 μV / Responsivity Value (V/W); Item # PM103E: 1 μV / Responsivity Value (V/W) | 100 µV / Responsivity Value (V/J) |
| Voltage Measurement Uncertainty | N/A | N/A | ±0.5% Full Scale (1 V - 200 V) ±1% Full Scale (20 mV, 400 mV); Item # PM103E: ±0.5% Full Scale (100 mV - 200 V) ±1% Full Scale (20 mV, 40 mV) | ±0.5% Full Scale |
| Trigger Level | N/A | N/A | 3% - 90% Full Scale | 0.1 % to 99.9 % Full Scale |
| Repetition Rate | N/A | N/A | Single Shot - 80 kHz, Dependent on Sensor | 3 kHz (Dependent on Sensor and Settings) |
| Wavelength Correction | N/A | N/A | Sensor Dependent; nm (V/W) | Sensor Dependent; nm (V/J) |
| Beam Area Setting | N/A | N/A | Diameter 1/e2 or Rectangular x,y | Diameter 1/e2 |
| AD Converter | N/A | N/A | 16 bit | 16 bit |
| Sensor Temperature Measurement | ||||
| Supported Temp. Sensor | Thermistor | |||
| Temp. Measurement Range | -10 to 120 °C | -10 to 120 °C | -10 to 120 °C Item # PM103E: -10 to 80 °C | -10 to 80 °C |
| Sensor Interface | ||||
| Connector | DE-9 Female | |||
a. 請看下方探頭規格。
b. 由于此表頭只能支持*高3 kHz重復頻率，因此它不應與可探測高達10 kHz重復頻率的ES408C探頭一起使用。
c. PM103E接口對于帶EEPROM的所有已校準探頭可設為nm，對于沒有EEPROM的客戶搭建探頭可設為A/W。
兼容探頭概述
| Sensor Type | C-Series Photodiode Sensors, Photodiodes (Max 5 mA) | C-Series Thermal Power Sensors, Thermopiles (Max 1 V) | C-Series Thermal Position & Power Sensors | C-Series Pyroelectric Sensors, Pyros (Max 100 V) |
|---|---|---|---|---|
| Compatible Interfaces | PM101, PM101A, PM101R, PM101U, PM103, PM103A, PM103E, PM103U, PM100USB | PM101, PM101A, PM101R, PM101U, PM102, PM102A, PM102U, PM100USB | PM102, PM102A, PM102U | PM103, PM103A, PM103E, PM103U, PM100USBa |
| Wavelength Ranges | 200 nm - 5.5 µm | 190 nm - 20 μm | 190 nm - 20 µm | 185 nm - 25 μm |
| Power / Energy Ranges | 100 pW - 20 W | 10 μW - 200 W | 0.5 mW - 50 W | 10 μJ - 15 J |
a. 由于此表頭只能支持*高3 kHz重復頻率，因此它們不應與可探測高達10 kHz重復頻率的ES408C探頭一起使用。
b. 探頭規格的完整列表請?jiān)L問光電二極管功率探頭、熱敏功率探頭、熱敏位置&功率探頭或熱釋電能量探頭頁面。其他信息請聯系技術支持。
森泉為您的科研事業添磚加瓦：
激光控制：激光電流源、激光器溫控器、激光器控制、伺服設備與系統等等
探測器：光電探測器、單光子計數器、單光子探測器、CCD、光譜分析系統等等
定位與加工：納米定位系統、微納運動系統、多維位移臺、旋轉臺、微型操作器等等
光源：半導體激光器、固體激光器、單頻激光器、單縱模激光器、窄線寬激光器、光通訊波段激光器、CO2激光器、中紅外激光器、染料激光器、飛秒超快激光器等等
光機械件：用于光路系統搭建的 gao 品 zhi 無應力光機械件，如光學調整架、鏡架、支撐桿、固定底座等等
光學平臺：主動隔振平臺、氣浮隔振臺、實驗桌、剛性工作臺、面包板、隔振、隔磁、隔聲綜合解決方案等等
光學y件：各類晶體、光纖、偏轉鏡、反射鏡、tou射鏡、半透半反鏡、濾光片、衰減片、玻片等等
染料：激光染料、熒光染料、光致變色染料、光致發光染料、吸收染料等等
