A 1230-02
4-quadrant voltage amplifier
DC-7 MHz
380 V/μs
(2x)185 W (source)
(2x) 68 W (sink)
Broadband lab amplifier for ohmic and complex loads
Ideally suitable as downstream equipment for function generators
Output voltage up to 75 Vpeak
Output current up to 5 Apeak
Addition of two inputs with 50 Ω and 100 kΩ input resistance, respectively, is possible
A preamplifier output (Bridge out) allows for simple bridge circuit structures
Full remote control possible through USB port
2 supply voltages
Electrical data
Output Voltage vs. Frequency | U-I Plot, Supply DC Limit |
Output voltage | ± 75 Vpeak |
Output current | ± 5 Apeak |
Performance range | DC – 1 MHz |
Frequency response | DC - 7 MHz (Small signal -3 dB) |
Slew rate | 380 V/μs |
Voltage amplification | 20 ± 1 % (± 100 ppm /°C) input 50 Ohm |
Offset | ± 2 mV typ.(± 0.1 mV /°C) |