| 美國uniwest渦流航空檢測儀,EVi UNIWEST EVi-隨著表面成像的功能優化uniwest探傷的精度 |
UNIWEST EVi-隨著表面成像的功能優化uniwest探傷的精度 |
為了保持我們不斷提高無損檢測的精度和效率的傳統，uniwest的電子商務解決方案團隊開發的技術最 *、操作簡易的便攜式渦流檢測系統— the EVi。 Evi優點：
工業應用：
|
| 工程由uniwest EC解決方案團隊，在美國制造，EVi直接與探頭和附件的eddyview。 uniwest的陣列的標準和可選的信號處理，讀出，數據存儲、報警和顯示。 功能設置靈活應用的一個新的標準，使用方便，數據的解釋和整體操作的準確度比以往 任何時候都可能在一個便攜式檢測系統。 |
GENERAL
Dimensions
• (WxHxD): 13.8" x 8.75" x 2.58"
• Weight: 7 lb 0 oz without batteries, 9 lb 2 oz with 2 batteries Display Size and Resolution
• 10.1" WXGA 1280x800 pixels Operating temperature
• 0 – 45ºC minimum when the battery is charging. 50ºC when operating with a battery or AC but not both.
MEASUREMENTS
• Frequency Range: 120 Hz to 15 MHz
• Gain: 0 dB to 114 dB in 0.1 dB steps
• Rotation: 0 degrees to 359.9 degrees in 0.1 degree steps
• Sweep: 0.001 second to 10 second per division
• Low Pass Filter: 0 to 10 kHz adjustable to 3 digits of precision
• High Pass Filter: 0 to 10 kHz adjustable to 3 digits of precision
• Probe Drive: 2 Vp-p, 4 Vp-p, 7 Vp-p (Also variable from 0 to 7 Vp-p in 1 percent steps)
• Probe Coupling: Monitors the probe to part coupling of a differential probe.
I N P U T S / O U T P U T S
• Power connector: 2.5mm IP68 Locking Connector
• Scanner/Probe Connector: 27 Pin IP68 Connector
• Probe types: Absolute and differential in either bridge or reflection configuration
• X and Y Analog Outputs: 2 SMA connectors for differential, absolute, or combination
• DB25 connector: 8 configurable encoder, sync or other inputs, 8 configurable alarm, multiplexer, or other outputs,
2 dedicated alarm outputs – TTL and open collector
• Alarm outputs: TTL & Open Collector (multi I/O), Audio or Headphone (USB to 3.5mm adaptor)
• Video output: USB will support external monitors (VGA, DisplayPort, or HDMI with adaptors)
• Ethernet: Remotely control the instrument and retrievedata in real time.
• USB port A: Interface to storage devices, keyboard
• USB OTG: Interface to OTG storage devices
• Exportable Files: Report files, data files, settings files
POwER
• Power adaptor requirements: 100-240VAC, 1.4A max
• Power connector: 10VDC-24VDC
• Available batteries: 1 or 2 Lithium DR202i or compatible
• Battery operating time: 5 hours minimum with most scanners, 4 hour recharge rate.
• Battery protection: SMBus V1.1 safety features. Monitor battery thermistors, disconnects, and circuit protection.
Batteries are hot swappable.
• Battery Charging: Instrument will charge batteries using external power
