DI6001
DGA4012-WPKG/US
1: 3 LED
2: setting pushbutton
Product characteristics
Compact speed monitor M18
DGA
Switching output and pulse output
Sensing range 12 mm [nf]
non-flush mountable
Application | |
Application | Evaluation of rotating and linear movements for speed below the preset value, blockage |
Switching function | output is switched during the start-up delay and if (f actual) is greater than (f preset) * |
Electrical design | DC PNP |
Switching output | normally open / closed programmable |
Electrical data | |
Nominal voltage [V] | 10...36 DC **) |
Current consumption [mA] | < 15 |
Reverse polarity protection | yes |
Protection class | II |
Outputs | |
Transistor | |
Current rating [mA] | 250 / 15 ***) |
Voltage drop [V] | < 2.5 |
Short-circuit protection | pulsed |
Overload protection | yes |
Range | |
Sensing range [mm] | 12 |
Correction factors | mild steel = 1 / stainless steel approx. 0.8 / brass approx. 0.5 / Al approx. 0.4 / Cu approx. 0.3 |
Measuring / setting range | |
Setting range [pulses/min.] | 3...6000 |
Adjustment of the switch point | Teach function |
Hysteresis [% of Sp] | 10 |
Start-up delay [s] | 0...15 |
Reaction times | |
Damping frequency (max.) [pulses/min] | 18000 |
Environment | |
Ambient temperature [°C] | -20...80 |
Protection | IP 67 |
Tests / approvals | |
EMC | EN 60947-5-2 |
Safety classification | |
MTTF [a] | 1031 |
Mechanical data | |
Mounting | non-flush mountable |
Housing materials | stainless steel 316Ti / 1.4571; PBT |
Weight [kg] | 0.065 |
Displays / operating elements | |
Operation LED | green |
Input pulses LED | green |
Output status indication LED | yellow |
Electrical connection | |
Connection | M12 connector; gold-plated contacts |
| |
Remarks | |
Remarks | *) factory setting **) cULus - Class 2 source required ***) switching output / pulse output |
Pack quantity [piece] | 1 |
