E26,E26/50x39,E26/51x39或E26d(無裙邊）燈頭的燈及其接觸性能的量規——分美規和日規
GAUGE FOR TESTING CONTACT-MAKING OF LAMPS FITTED WITH CAPS E26, E26/50x39,E26/51x39 Page 1/1 & E26d (NON-SKIRTED)
目的：
PURPOSE:
檢驗燈在E26燈座中有關接觸性能的尺寸。
To check lamp dimensions for contact-making in E26, E26/50x39, E26/51x39 or E26d lampholders.
檢測：
TESTING:
如果燈插入量規時，W面可與V面共面或凸出V面，則可認為燈的形狀與燈座的配合是合格的。
The shape of the lamp with regard to the fit in the lampholder is assumed to be correct, if the lamp can be pushed into the gauge until plane W reaches plane V or projects beyond it.
對于E26/E24燈頭的燈，當V面與W面共面時，燈頭端部（包括焊錫或?qū)щ姴牧希?yīng)不超過X面。
For E26/E24 capped lamps, when surfaces V and W are coincident, the top of the cap including any solder or conductive material, shall not extend above surface X.
整套E26燈頭量規包含以下產品，如有需要請聯系客服：
| 量規名稱 | 型號 |
E26燈頭通規 | 7006-27D-3 |
E26燈頭接觸性能規 | 7006-29-3 |
E26燈頭止規 | 7006-29L-4 |
E26d燈頭量規包括以下量規如有需要請聯系客服：
| 量規名稱 | 型號 |
| E26d/E26燈頭通規 | 7006-27D-3 |
| E26d/E26燈頭止規 | 7006-29L-4 |
| E26d/E26燈頭接觸性能規（分日規和美規） | 7006-29-3 |
| 檢驗成品燈上E26d燈頭防意外接觸性能規 | 7006-29A-2 |
E26d燈頭用基準直徑為23mm量規 | 7006-29B-2 |
E26d燈頭用基準直徑為13.2mm量規 | 7006-29C-2 |
E26d燈頭用基準直徑為10.4mm量規 | 7006-29D-1 |
