汽車發(fā)動機設備采用的一般是砂型?;蚪饘倌⒓訜釣橐簯B(tài)的鋁或鋁合金澆入模腔,而這樣的配件在檢測儀上和要求上是非常高的,無論從整體的各個參數(shù)還是品質上,汽車發(fā)動配件性能的好與壞都與關系到整個汽車產品的質量,自然在選擇測漏儀的時候就非常需要注意了。
測試方式Test Methods | 差壓比較Differential pressure |
操作語言Language | 中文,英文可定制Chinese , English can be customized |
壓力單位顯示Pressure unit display | KPa、MPa、Bar |
壓力調整方式Pressure adjustment mode | 后置手動(電子需定制)Front manual (electronic to be customized) |
泄漏量單位Units of measurement (selectable) | Pa、Pa/s、ml/min |
顯示精度Display accuracy | 0.01ml/min&0.1Pa/s |
檢測精度Test accuracy | 0.1%F.S(滿量程Full Scale) |
重復性Repeatability | 0.2%F.S(滿量程Full Scale) |
檢測范圍Detection range | -0~100Kpa |
檢測通道數(shù)量Number of Channels | 1 |
檢測時間設置Detection time setting | 0-999s |
檢測氣體Detectable masses | 氮氣或者潔凈壓縮空氣 N2, clean compressed air |
通信接口Communication Interface | R232/IO |
輸入輸出In/outputs | 可連接PLC程序 PLC compatible for control and status information |
電源電壓Supply voltages | 220 V±10%,50Hz |
功率消耗Power consumption | 28W |
外觀尺寸Dimensions (L x W x H) | 350×210×190mm |
重量Weight | 11kg |
防護級別Type of protection | IP65 |
特殊量程需定制,詳細請咨詢銷售工程師 |