固緯PEL-3031E直流電子負載
PEL-3000E系列是一款可程式單通道電子負載，PEL-3031E提供300W(1V~150V/60A)電流吸汲能力。承襲PEL-3000系列之LCD面板及操作界面，操作簡單，視覺上一目瞭然。此款為固緯針對中低功率電子元器件、電池、行動電源、電源類產品需求所提供的高速且精準量測測試機種。
PEL-3000E系列適用於60mA以上電流吸汲及量測應用，包含charger/ Adaptor和各種電源供應單元及可攜式充電裝置之量測應用。
PEL-3000E 提供了七種操作模式，分別為定電流、定電壓、定電阻、定功率等四種基本操作模式再加上定電流加定電壓、定電阻加定電壓、定功率加定電壓模式，使用者可依照產品的需求測試，選擇不同的操作模式。在定電流模式，電子負載會依據設定的電流值，吸汲一個固定電流值。在定電壓模式，電子負載控制吸汲電流，維持電子負載的輸入端電壓為一個定值。在定電阻模式，電子負載會依據所設定的電阻值吸汲電流，吸汲(線性)正比於輸入電壓的電流值。在定功率模式，電子負載依據所設定的功率，將消耗負載功率(負載電壓x負載電流)。
依據測試條件的不同，用戶可以使用靜態(Static)功能產生一個固定負載吸汲條件、動態功能(Dynamic)週期性地執行兩個吸汲條件之間切換或Sequence功能提供二個吸汲條件以上的測試。Sequence功能可分為Normal Sequence和 Fast Sequence。Normal Sequence功能是*彈性的方式去產生複雜吸汲條件。可供使用者依序設定不同吸汲條件(CC, CR, CV or CP模式)及時間(可設定範圍: 1ms to 999h 59min 59s)來建立一組有變化的吸汲條件。而Fast Sequence可設定*小的步階(step)時間解晰度為25us，利用多組步階(step)參數的設定，可以讓使用者模擬各種實際負載的連續電流變化。例如: 電動工具模擬測試。使用示波器及電流探棒的量測，紀錄電動工具操作時的電流波形，經由電子負載sequence參數設定模擬電流波形，測試電源裝置並分析電動工具運作狀態。Soft start功能可供使用者決定吸汲電流的上升時間，以多少時間到達電子負載所設定的電流或電阻或功率值。適當?shù)脑O(shè)定Soft Start的上升時間，對於待測物(電源)瞬間的輸出電流所造成的輸出電壓擾動，可以有效的抑制。一般的DC load沒有Soft start功能，當進行高速吸汲電流的控制時，因?yàn)殡娮迂?fù)載與待測物之間連結線的電感效應，所以在電子負載輸入端產生瞬間壓降，因此造成輸出電壓反單調遞增(Non-monotonic increase). 而透過PEL-3000E的soft start功能不僅輸出電壓可以符合單調遞增(Monotonic increase)，而且可避免Inrush current及surge voltage在待測物端的產生。例如: 利用power supply+ LED+ DC load(啟動Soft start)可避免Inrush current及surge voltage對LED造成損害。
PEL-3000E具有計時(count Time)功能可以得知電子負載吸汲電流的時間，幫助使用者估算出待測物功率容量。計時關閉(cut off Time)功能，使用者可以利用此項功能控制電子負載吸汲電流時間，彈性的控制時間，可以增加電子負載測試的靈活性。UVP過低輸入電壓保護功能可應用於電池放電測試，當電池的工作電壓低於UVP的設定值時，電子負載停止對電池吸汲電流避免過度放電，藉以保護電池。除此之外PEL-3000E系列提供類比控制(Analog Control)端子。供使用者以外部電壓, 外部電阻和開關控制PEL-3000E，也可從類比控制(Analog Control)端子監視電子負載狀態及顯示保護警報等。
Model | PEL-3031E | |
Power | 300W | |
Range | Low | High |
Voltage | 1~150V | 1~150V |
Current | 0~6A | 0~60A |
Min. Operating Voltage(dc) | 1V-6A | 1V-60A |
Static Mode |
|
|
Constant Current Mode |
|
|
Range | 0~6A | 0~60A |
Setting Range | 0~6.12A | 0~61.2A |
Resolution | 0.2mA | 2mA |
Accuracy | (T *1) ± (0.1% of set +0.1% of F.S) +Vin/500 kΩ (Full scale of High range) | (T *1) ± (0.1% of set +0.2% of F.S) +Vin/500 kΩ (Full scale of High range) |
Constant Resistance Mode |
|
|
Range | 60S-0.002S(0.01666Ω~500Ω)(300W/15V); 6S-0.0002S(0.1666Ω -5kΩ )(300W/150V) | |
Setting Range | 60S-0.002S(0.01666Ω~500Ω)(300W/15V); 6S-0.0002S(0.1666Ω -5kΩ )(300W/150V) | |
Resolution(30000 steps) | 0.002S(15V) ; 0.0002S(150V) | |
Accuracy | (T *1) ± (0.3% of set + 0.6S) + 0.002mS | |
Constant Voltage Mode |
|
|
Range | 1~15V | 1~150V |
Setting Range | 0~15.3V | 0~153V |
Resolution | 0.5mV | 5mV |
Accuracy | (T *1)± (0.1% of set + 0.1% of F.S) (Full scale of Low range) | (T *1)± (0.1% of set + 0.1% of F.S) (Full scale of High range) |
Constant Power Mode |
|
|
Range | 3W-30W(6A) | 30W-300W(60A) |
Setting Range | 0W-30.6W | 0W-306W |
Resolution | 1mW | 10mW |
Accuracy | (T *1)±(0.6 % of set + 1.4 % of f.s (Full scale of H range)) + Vin^2/500 kΩ | |
Dynamic Mode |
|
|
General |
|
|
T1& T2 | 0.05mS - 30mS / Res : 1uS; 30mS - 30S / Res : 1mS | |
Accuracy | 1uS / 1mS ± 200ppm | |
Slew Rate (Accuracy 10%) | 0.001~0.25A/uS | 0.01~2.5A/uS |
Slew Rate Resolution | 0.001A/uS | 0.01A/uS |
Slew Rate Accuracy of Setting | ±(10% + 15us) * Time to reach from 10% to 90% when the current is varied from 2% to (20% to in L range) of the rated current. | |
Constant Current Mode |
|
|
Current | 0~6A | 0~60A |
Setting range | 0~6.12A | 0~61.2A |
Current Resolution | 0.2mA | 2mA |
Current Accuracy | ±0.8% F.S. | |
Constant Resistance Mode |
|
|
Range | 60S-0.002S(0.01666Ω~500Ω)(300W/15V); 6S-0.0002S(0.1666Ω -5kΩ )(300W/150V) | |
Setting Range | 60S-0.002S(0.01666Ω-500Ω )(300W/15V) 6S-0.0002S(0.1666Ω -5kΩ )(300W/150V) | |
Resistance Resolution | 30000 steps | |
Resistance Accuracy | ±(1%set + 0.6S) + 0.002mS | |
Measurement |
|
|
Voltage Readback |
|
|
Range | 0~15V | 0~150V |
Resolution | 0.5mV | 5mV |
Accuracy | (T *1)± (0.1% of rdg + 0.1% of F.S) (Full scale of Low range) | (T *1)± (0.1% of rdg + 0.1% of F.S) (Full scale of High range) |
Current Readback |
|
|
Range | 0~6A | 0~60A |
Resolution | 0.2mA | 2mA |
Accuracy | (T *1)± (0.1% of rdg + 0.1% of F.S) (Full scale of High range) | (T *1)± (0.1% of rdg + 0.2% of F.S) (Full scale of High range) |
General |
|
|
Function |
|
|
Trigger In/Out terminal (BNC) | YES | |
Current momitor output | YES | |
Analog External Control | YES | |
Soft Start | YES | |
SEQUENCE (Normal/Fast) | YES | |
PRESET DATA | 10 Sets | |
PROTECTION | OCP, OPP, UVP, OVP, OTP, RVP | |
Other |
|
|
POWER SOURCE | 100-120VAC/ 200-240VAC, 47-63Hz | |
Interface | USB, GPIB(Option), Analog external control | |
Dimensions & Weight | 213.8(W) x 124.0(H) x 400.5(D)mm, Approx.7.5Kg | |
Note: *1 If the ambient temperature is over 30℃ or below 20℃, then T = ±∣t – 25℃∣x 100ppm/℃ x Set
If the ambient temperature is in the range of 20℃ ~ 30℃, then T = 0 ( t is the ambient temperature)
固緯PEL-3031E直流電子負載固緯PEL-3031E直流電子負載固緯PEL-3031E直流電子負載固緯PEL-3031E直流電子負載
