一、混凝土測溫儀是根據我國建筑行業施工特點和有關技術規范研制的 化測溫儀器，可直觀、準確、快捷地數字顯示被測溫度，可靠性好、使用范圍廣、寬溫操作環境、體積小重量輕、操作簡單、攜帶方便、適合工地?；炷翜y溫儀主要用于建筑、建材、水利、電力、冶金、石化、港口、道橋、市政等基本建設工程。測溫線規格：0.5m、1m、1.5m、2m、2.5m、3m、3.5m、4m、4.5m、5m，其他規格可定做
First, the concrete thermometer is a temperature measuring instrument developed in accordance with the construction characteristics and related technical specifications of China's construction industry. It can intuitively, accurately and quickly display the measured temperature digitally. Environment, small size, light weight, simple operation, easy to carry, suitable for construction site. Concrete thermometers are mainly used in construction projects such as construction, building materials, water conservancy, electric power, metallurgy, petrochemicals, ports, roads and bridges, and municipal administration. Temperature measuring line specifications: 0.5m, 1m, 1.5m, 2m, 2.5m, 3m, 3.5m, 4m, 4.5m, 5m, other specifications can be customized
二、混凝土測溫儀適用范圍：
適用于各類建筑工程的現場施工測溫，與測溫探頭配合可測材料和熟料溫度，如：氣體、液體、流體、拌合物和顆粒狀材料；與預埋式測溫線配合可測冬期施工混凝土和大體積混凝土內部溫度。
Application scope of concrete thermometer:
It is suitable for on-site construction temperature measurement of various construction projects. It can measure the temperature of materials and clinker with temperature measurement probes, such as: gas, liquid, fluid, mixture and granular materials; it can be used with embedded temperature measurement lines. Measure the internal temperature of winter construction concrete and mass concrete.
三、混凝土測溫儀技術參數：
★測溫范圍：-30℃～+130℃
★測溫誤差：≤ 0.5℃(與測溫探頭配合)；≤1.0°C(與測溫線配合)
★分辨率：0.1℃
★操作環境溫度:-20℃～+50℃
★顯示方式：三位半寬溫型液晶顯示屏
★電源，9V積層電池一枚
★重量：200g
★主機體積：135mmX72mmX32mm
Third, the technical parameters of concrete thermometer:
★ Temperature measurement range: -30 ℃ ～ + 130 ℃
★ Temperature measurement error: ≤ 0.5 ℃ (cooperate with temperature probe); ≤ 1.0 ° C (cooperate with temperature line)
★ Resolution: 0.1 ℃
★ Operating ambient temperature: -20 ℃ ～ + 50 ℃
★ Display mode: Three half-width temperature LCD
★ Power supply, one 9V laminated battery
★ Weight: 200g
★ Host volume: 135mmX72mmX32mm
四、混凝土測溫儀使用說明：
★用主機與測溫探頭測量材料溫度
將測溫探頭的插頭插入主機插座，按下電源開關，將測溫探頭金屬桿插入被測物中，插入深度不少于其長度的1/2，兩分鐘左右在主機上讀取溫度數據。在測量拌合物 溫度時，為避免測溫探頭與拌合物中的硬物過度撞擊而影響使用壽命，可先用金屬棍在拌合物中預留孔，再將測溫探頭插入孔中測溫。每次用后應將測溫探頭擦拭干凈。
★用主機與測溫線測量大體積混凝土溫度
施工測溫方案確定后，根據測溫點數量和深度選用長度規格合適的測溫線，例如：實際測溫點深 0.2m ～ 0.3m ，可選用規格為 0.5m 的測溫線；實際測溫點深 2.5m ～ 2.8m ，可選用規格為 3m 的測溫線，以次類推。預埋時可用鋼筋等桿件作支承物，將測溫線按照縱向測溫點距離綁在支承物上，溫度傳感器與支承物之間應做隔熱處理。在澆筑混凝土?xí)r，將綁好測溫線的支承物植入混凝土中，溫度傳感器處于測溫點位置，插頭留在混凝土外面并用塑料袋罩好，避免潮濕，保持清潔。為便于操作，留在外面的導線長度應大于 20cm 。測溫時，按下主機電源開關，將測溫線插頭插入主機插座中，主機顯示屏上即可顯示相應測溫點的溫度。
★用主機與測溫線測量冬期施工混凝土溫度
在澆筑混凝土?xí)r，按冬期施工測溫方案預留測溫孔，在每個孔內放置一支測溫線，測溫線的插頭留在孔外并用塑料袋罩好，避免潮濕，保持清潔。測溫時，按下主機電源開關，將測溫線插頭插入主機插座中，主機顯示屏上即可顯示相應測溫點的溫度。每階段測溫結束后將測溫線收存好，以備下次再用。也可將測溫線埋入混凝土中一次性使用，具體作法見使用方法“ 2 ”。
★夜間測溫讀數照明功能的使用
在夜間或黑暗環境下使用時，按下主機照明開關，液晶顯示屏可發出淡綠色的背景光，使讀數清晰醒目。
Fourth, the use of concrete thermometer:
★ Measure material temperature with host and temperature probe
Insert the plug of the temperature probe into the socket of the host, press the power switch, insert the metal rod of the temperature probe into the test object, and insert the depth of not less than 1/2 of its length, and read the temperature data on the host in about two minutes. When measuring the temperature of the mixture, in order to avoid the impact of the temperature probe and the hard objects in the mixture to affect the service life, you can use a metal stick to reserve a hole in the mixture before inserting the temperature probe into the hole Temperature measurement. Wipe the temperature probe clean after each use.
★ Measure the temperature of large volume concrete with host and temperature measurement line
After the construction temperature measurement plan is determined, select a temperature measurement line with an appropriate length according to the number and depth of the temperature measurement points, for example, the actual temperature measurement point depth is 0.2m to 0.3m, and a temperature measurement line with a specification of 0.5m can be selected; actual temperature measurement The point depth is 2.5m ～ 2.8m, and a temperature measuring line with a specification of 3m can be selected, and so on. During embedding, rods and other rods can be used as supports, and the temperature measurement line is tied to the support according to the distance of the longitudinal temperature measurement point. The temperature sensor and the support should be insulated. When pouring concrete, the support bound with the temperature measurement line is implanted into the concrete, the temperature sensor is at the temperature measurement point, the plug is left outside the concrete and covered with a plastic bag to avoid moisture and keep it clean. For ease of operation, the length of the wires left outside should be greater than 20cm. When measuring the temperature, press the power switch of the host and insert the temperature measurement line plug into the socket of the host, and the temperature of the corresponding temperature measurement point can be displayed on the display of the host. Zh
★ Using the host and the temperature measurement line to measure the concrete temperature in winter construction
時 When pouring concrete, reserve temperature measurement holes according to the winter construction temperature measurement plan, place a temperature measurement line in each hole, and leave the plug of the temperature measurement line outside the hole and cover it with a plastic bag to avoid moisture and keep it clean. When measuring the temperature, press the power switch of the host and insert the temperature measurement line plug into the socket of the host, and the temperature of the corresponding temperature measurement point can be displayed on the display of the host. After each phase of temperature measurement, store the temperature measurement line for next time. The temperature measurement line can also be buried in the concrete for one-time use. For the specific method, see the usage method "2". Zh
★ Using the temperature reading function at night
使用 When using at night or in a dark environment, press the main unit's lighting switch, and the LCD screen can emit a light green background light to make the readings clear and eye-catching.
五、混凝土測溫儀構成和功能：
主機可分別與測溫探頭或測溫線連接構成測溫系統，可根據現場需要和測溫點數量靈活配置。
★主機
主機為便攜式儀表，設有電源開關、照明開關、插座和液晶顯示屏，可數字顯示被測溫度值，并有夜間測溫讀數照明功能。為防塵防潮防磕碰，采用密封性能良好的薄膜輕觸開關和背帶式儀器套，也可打開主機后面的支架，置于桌面上使用。
★測溫探頭
測溫探頭由插頭、導線、手柄和外徑為φ5mmX220mm的金屬管制成，管內前端封裝溫度傳感器，適宜測量材料和熟料溫度。
★測溫線
預埋式測溫線由插頭、導線和溫度傳感器制成，適宜測量混凝土內部溫度，每支測溫線可測一點溫度，在施工中可任意布置測溫點。為便于分層測溫，每支測溫線的插頭都貼有相應長度規格的標簽。
Fifth, the composition and function of concrete thermometer:
The host can be connected to a temperature measuring probe or a temperature measuring line to form a temperature measuring system, which can be flexibly configured according to the needs of the site and the number of temperature measuring points. Zh
★ Host
The host computer is a portable instrument with a power switch, lighting switch, socket and LCD screen, which can display the measured temperature value digitally, and has a lighting function for temperature reading at night. In order to prevent dust, moisture, and bumps, a film tact switch with good sealing performance and a strap-type instrument cover can be used. The bracket at the back of the host can also be opened and placed on a desktop. Zh
★ Temperature Probe
溫 The temperature measuring probe is made of a plug, a wire, a handle and a metal pipe with an outer diameter of φ5mmX220mm. A temperature sensor is enclosed at the front end of the pipe, which is suitable for measuring the temperature of materials and clinker. Zh
★ Temperature line
The embedded temperature measuring line is made of plug, wire and temperature sensor, which is suitable for measuring the internal temperature of concrete. Each temperature measuring line can measure a little temperature, and the temperature measuring points can be arranged arbitrarily during the construction. In order to facilitate layered temperature measurement, the plug of each temperature measurement line is labeled with a corresponding length specification.
六、混凝土測溫儀電池的更換：
當主機顯示屏左上角出現電池符號或不能正常開機時，一般為電池電壓不足所致，需換新電池。方法如下：將主機后面的電池倉蓋向下推動，打開電池倉將舊電池取出，扣好新電池，然后將電池倉蓋恢復原位置。
6. Replacement of concrete thermometer battery:
When the battery symbol appears in the upper left corner of the host computer's display or it cannot be turned on normally, it is generally caused by insufficient battery voltage, and a new battery needs to be replaced. The method is as follows: push down the battery compartment cover on the back of the host, open the battery compartment to remove the old battery, fasten the new battery, and then restore the battery compartment cover to its original position.
七、混凝土測溫儀注意事項：
★主機未接測溫探頭或測溫線時顯示屏上顯示“-1”為準備工作狀態。
★在操作中A用力過猛，將插頭插入或拔出主機插座時，應持穩插頭。
★插頭和主機插座應避免潮濕，保持清潔。如不慎進水受潮，請擦凈晾干后再使用，以免測溫結果失準。
★儀器使用完畢應及時關機，長期不用時應將電池取出以免損壞儀器。
★不要自行打開主機后蓋，需要檢修或校準時，請送回生產廠或代理處。
6. Replacement of concrete thermometer battery:
When the battery symbol appears in the upper left corner of the host computer's display or it cannot be turned on normally, it is generally caused by insufficient battery voltage, and a new battery needs to be replaced. The method is as follows: push down the battery compartment cover on the back of the host, open the battery compartment to remove the old battery, fasten the new battery, and then restore the battery compartment cover to its original position.
八、混凝土測溫儀附件：
★使用說明書 1 份
★產品檢驗合格證 1 份
★質量保證書 1 份
★儀器套 1 件
★電池 1 枚
Eight, concrete thermometer accessories:
★ 1 instruction manual
★ 1 product inspection certificate
★ 1 Quality Assurance Certificate
1 instrument set
★ 1 battery
