FT-106普通磨料堆積密度測定儀
FT-106Common abrasive bulk density tester
一. 參照標準standard:
ISO9136:1989《粗磨?! 《逊e密度的測定》和行業標準JB/T7984.2-1999《普通磨料 粗磨粒堆積密度的測定》的相關要求;GB/T20316.1-2009堆積密度測定儀要求;適用于檢測制造固結磨具和涂附磨具的粗顆粒普通磨料的堆積密度
According to the international standardISO9136:1989 "the determination of coarse grinding grain bulk density” andindustry standards JB/T7984.2-1999 the relevant technical requirements of ordinary abrasive coarse grinding grain ofbulk density determination, at the same time meet the requirements ofGB/T20316.1-2009 bulk density meter;It is suitable to test the packing densityof coarse grain grinding materials, which can be used in the manufacture ofconsolidation grinding tools and coated abrasive tools.
二.參數資料Technical Parameters
1.1漏斗材質:不銹鋼;
Funnel material: stainless steel.
1.2漏斗尺寸:高度240mm;頂部直徑160mm;出口直徑:(20±0.5)mm;
漏斗底部與測量筒上口的距離:(76±1)mm 測量筒尺寸:內徑64mm; 凈高度62mm 測量筒容積:.(200±0.5) cm3 測量誤差:≤±0.02g/cm3
Funnel dimensions: height 240mm, topdiameter 160mm, outlet diameter: (20±0.5)mm, the distance between the bottom of the funnel and the top ofthe measuring cylinder: (76±1)mm, measuring cylinder dimensions:inner diameter 64mm, net height: 62mm, measuring cylinder volume: (200±0.5) cm3, measurement error:≤±0.02g/cm3.
2.1測量誤差:≤±0.02g/cm3。Measurementerror:≤±0.02g/cm3.
2.2測量筒容積:200±0.5cm3。Measuring cylinder volume: (200±0.5) cm3.
2.3外形尺寸:230mm(長)×250mm(寬)×425mm(高)
Dimensions: 230mm (L) * 250mm (W) * 425mm (H)
FT-106普通磨料堆積密度測定儀視頻文件鏈接:
/v_show/id_XMTMyMTM1MTM2MA==.html?spm=a2hzp.8253869.0.0