格蘭-泰勒偏振器
特性：
- 輸出光束消光比: 100,000:1（見下方詳細圖解）
- 空氣間隙設計
- 采用激光質量天然方解石制造（低散射）
- 通光孔徑內（不包括側面端口）的波前畸變≤ λ/4
- 在入射和出射面的表面質量為劃痕-麻點20/10（側端口處為80/50）
- 波長范圍350納米-2.3微米（未鍍膜）
- 可鍍寬帶增透膜
格蘭-泰勒偏振器能產生消光比超過100000：1的極純凈線偏振光，適用于在350納米*-2.3微米波長范圍內的激光束。也會有大量的反射光從偏振器的側窗出射，包括o光和e光。因此，這種出射光并非純正的偏振光，對于需要高質量和偏振光束的應用，只有透射e光可以使用。
偏振器的輸入和輸出面都是拋光成激光質量的20-10劃痕-麻點表面光潔度，以將激光束或光場的透射e偏振成分的散射降到少。o偏振成分通過68o角(波長相關)反射，再通過兩個側面端口之一從偏振器出射，使偏振器可以雙向使用。逃逸光并不是純正的偏振光，且側面端口的劃痕-麻點為80-50。
警告：方解石是一種溫度敏感型晶體，如果暴露在熱沖擊下會破裂。因此在收到貨物達到熱平衡后（6 - 8 小時）再打開包裝。
Glan-Taylor Calcite Air Spaced Polarizer
A range of sizes comparable to our conventional Glan-Taylor polarizers is avaialble but as the prism sizes are larger, there is a modest premium on the price for a given aperture. Please contact us for further information.?
Glan-Taylor Calcite Air Spaced Polarizer
The Glan-Taylor design produces a high extinction ratio polarizer with low reflection losses and a high power handling capability. It is therefore particularly useful for polarizing laser light, with the further advantages that there is no transmission deviation or offset, and that a wide spectral range can be polarized.
Product Specification
POLARIZER | GT10 | GT12 | GT15 | GT18 | GT20 |
APERTURE (mm) | 10 | 12 | 15 | 18 | 20 |
WIDTH (mm) | 11 | 13 | 17 | 20 | 22 |
HEIGHT (mm) | 10 | 12 | 15 | 18 | 20 |
LENGTH (± 1.0mm) | 11 | 15 | 18 | 21 | 24 |
TRANSMISSION RANGE | ------------------- 0.25 - 2.5μm ------------------- | ||||
EXTINCTION RATIO | 10-5 | 10-5 | 10-5 | 10-6 | 10-6 |
TRANSMISSION UNCOATED | ----------------------- 88% ----------------------- | ||||
MAXIMUM BEAM DEVIATION | 3 min | 3 min | 3 min | 2 min | 2 min |
MAXIMUM OPTICAL POWER | ------------------- 200MW/cm2 -------------------- | ||||
MAXIMUM OPTICAL POWER CW | -------------------- 300W/cm2 --------------------- | ||||
Glan Taylor Polarizer With Orthogonal Output Side Exit Escape Windows
The Glan Taylor polarizer produces a high extinction ratio with low reflection losses and a high power handling capability.
Specification
Polarizer | GLBS 10 | GLBS 12 | GLBS 16 |
Aperture | 10 mm | 112 mm | 15 mm |
Spectral Range | --------------- 350 - 2500nm --------------- | ||
Extinction Ratio | ------------------- ??10-5 ------------------- | ||
Maximum Beam Deviation | ------------------- 3 min ------------------- | ||
Transmission | --- 88% (uncoated) 93-95% (ar-coated) --- | ||
Surface Flatness | ---------------- ?/6 @ NaD ---------------- | ||
Maximum Optical Power | -- 150W/cm2 (av) - 300MW/cm2 (pulsed) -- | ||
Glan-Taylor Polarizer With Brewster Angled Faces
This special version of the Glan-Taylor polarizer is cut such that the P-polarization (extra-ordinary ray) intersects all four optical faces at Brewster's angle, thus ensuring a minimal insertion loss over a wide operating wavelength range. Transmission in fact is approaching 99% for the P-polarization and extinction ratio is exceptional, exceeding that of the more conventional cut Glan-Taylor.
Glan-Taylor Polarizing Beam Combiner
This special version of the Glan-Taylor polarizer is cut such that the rejected S-polarized light exits in a direction parallel to the side exit face normal. More importantly, if the beam direction is reversed such that light is entering at the side face, it suffers no refraction at the surface and hence there is no dispersion of the position of the beam in the polarizer. This makes it possible to use this design for combining beams of orthogonal polarization and across a range of wavelengths without losing colinearity of the combined beams.
