1×2(2×2)單模全波長寬帶分路器?
Features | |||||
Low PDL | |||||
Low Insertion Loss | |||||
Ultra-Broadband | |||||
Stable and Reliable | |||||
Applications | |||||
Optical Communication System | |||||
Optical Testing System | |||||
Passive Optical Network | |||||
FTTX | |||||
Specifications | Splitting Ratio 50:50 | ||||
Parameter | Unit | Premium | A Grade | ||
Port Configuration |
| 1×2 or 2×2 | |||
Bandwidth | nm | 1270 to 1605 | |||
Insertion Loss | Max | dB | 3.6 | 4.0 | |
Excess Loss | Typ | dB | 0.07 | 0.1 | |
Uniformity | Max | dB | 0.8 | 1.2 | |
PDL | Max | dB | 0.15 | 0.20 | |
Operating Power | Max | W | 5 | ||
Operating Temperature | °C | -40 to +85 | |||
Storage Temperature | °C | -50 to +85 | |||
Package Type | mm | S6: Φ3×54 for bare fiber | |||
S8: Φ3×70 for 900μm loose tube | |||||
M1: 9×16×90 for 900μm loose tube or 2mm cable or 3mm cable | |||||
Max IL excludes 1385±20nm wavelength. | |||||
Splitting Ratio & Insertion Loss Conversion Table | ||||
Splitting Ratio | Maximum Insertion Loss (dB) | |||
Premium | A Grade | |||
Output Port 1 | Output Port 2 | Output Port 1 | Output Port 2 | |
50:50 | 3.6 | 3.8 | 4.0 | 4.0 |
60:40 | 2.7 | 4.8 | 2.9 | 5.1 |
70:30 | 2.0 | 6.2 | 2.2 | 6.6 |
80:20 | 1.3 | 8.0 | 1.5 | 8.5 |
90:10 | 0.6 | 11.5 | 0.8 | 12.9 |
95:5 | 0.4 | 15.6 | 0.5 | 19.2 |
98:2 | 0.3 | 20 | 0.4 | 21.5 |
99:1 | 0.3 | 24 | 0.4 | 24.6 |
Ordering Information:
A | B | S | ||||||
Wave length | Structure | Splitting Ratio | Grade | Package | Fiber Type | Pigtail | Fiber Length | Connector |
H= 1270 to 1605nm | 1=1×2 2=2×2 | 99=99:1 98=98:2 95=95:5 90=90:10 80=80:20 70=70:30 60=60:40 50=50:50 | P=Premium A=A Grade | 5=S6 7=S8 D=M1 | 1=SMF-28e | S=250μm bare fiber M=900μm loose tube L=3mm cable R=2mm cable | 0=0.5m 1=0.75m 2=1.0m S=Specify | 0=None 1=FC/PC 2=FC/SPC 3=FC/APC 4=SC/SPC 5=SC/APC 6=ST 7=FC/UPC 8=SC/UPC 9=MU A=LC B=SC/PC C=LC/UPC D=LC/APC |
Note: |