上海業(yè)可機電，shyeke@shyeke.com ,張

銷售產(chǎn)品有：

銷售產(chǎn)品有：

board, 16 bit,
Digital I/O (when supported by mainframe)
1-GN3211-2G055
16 ch differential break out cable, HDSub to 32 x BNC, 2 m; 
for use with GEN DAQ 16/32 ch input board
Faceplate 16 ch s.e.
16 ch single ended break out cable, HDSub to 16 x BNC, 2 m; 
for use with GEN DAQ 16/32 ch input board
G058
Cable 16 ch diff
Cable 16 ch s.e.
16 ch single ended 19 inch faceplate; 16 BNC feedthrough; 
to be used with 16 ch single ended break out cable
KAB172-1
Faceplate 32 ch s.e. 1-G058-2 
32 ch single ended 19 inch breakout panel; 32 BNC feedthrough; 
1-KAB172-1-2
16 ch differential 19 inch faceplate; 16 x 2 BNC feedthrough; 
to be used with 16 ch differential break out cable
1-KAB171-1-2 KAB171-1
G056 Faceplate 16 ch diff
1-G055-2
1-G056-2Artificial Star Adapter 1-G068-2
Safety adapter for the transition from the BNC system to the 4 mm safety system  
(banana plugs), set of 6 pcs.
1-G067-2
1-GN610-2
6 Channel, 200 kS/s, High Voltage Card, 
200 MB RAM, 18 bit,
±20 mV to ±1000 V input range, 600 Vrms CAT II isolation
6 Channel, 2 MS/s, High Voltage Card, 
2 GB RAM, 18 bit, 
±20 mV to ±1000 V input range, 600 Vrms CAT II isolation.
BNC-to-banana adapter
G068
KAB282-1.5
The artificial star adapter is a plug-on interface module for the high voltage cards 
1-GN610-2 and 1-GN611-2.
The artificial star adapter creates an artificial star point for measuring 3 phase 
signals.
GN611 200kS, 200M 1-GN611-2
Order no.
GN610 2MS, 2000M
Test Leads 1-KAB282-1.5
Type
G067
Insulated black/red lead set, 1.5 meters with safety-shrouded banana plugs and 2-Wire Shielded Cable, 600V CATII, 1.5m 1-KAB290-1.5
2-Wire Shielded Cable, 600V CATII, 3m 1-KAB290-3
2-Wire Shielded Cable, 600V CATII, 6m 1-KAB290-6
KAB290 Shielded cable for 1 kV card64 binary channels, 1 MS/s Digital Input Card, 512 MB RAM, TTL Level, 
4 SubD input connectors.
Type
Type
Order no.
1-GN6470-2 GN6470
Order no.
1 MS TTL Card
32+8 Channel digital/binary and light input/Acquisition Card with status out. Each card contains 32 channels of TTL inputs, 28 V max, 2
connectors for 2 groups of 16 channels; 3 counter/timer channels; 8 channels of light inputs and one status out (light/ARM).
32+8 binary channels, 1 MS/s Digital Input Card, 512 MB RAM, TTL 
level/light, SubD/LWL input connectors
GN4070 1 MS TTL/Fiber Optical Card 1-GN4070-2GEN DAQ 5B Carrier - uses one GEN DAQ slot, holds up to six 5B modules. 
5B modules, I/O connectors and cabling not included. Basic Amp required for acquisition.
G028 5B Carrier
GEN series Misc Cards
Type
1-G028-2
Order -GN110-2
Isolated 1-channel 100 MS/s, 14 bit HV Transmitter (requires 1/4 of 
receiver)
Type Order no.
GN110 100 MS, HV
Isolated 1-channel 25 MS/s, 15 bit HV Transmitter (requires 1/4 of 
receiver)
GN111 1-GN111-2 25 MS, HVIsolated 1-channel 25 MS/s, 15 bit MV Transmitter (requires 1/4 of 
receiver)
1-GN113-2 25 MS, MV GN113
100 MS, MV 1-GN112-2 GN112
Order no. Type
Isolated 1-channel 100 MS/s, 14 bit MV Transmitter (requires 1/4 of 
receiver)Order no.
1-GN401-2
2GB Memory Upgrade for 100 MS/s digitizers and fiber receiver cards only (done at factory, includes 
G030 2GB Mem Upgrade (for older boards with 800 MB memory)
GN401
Type
4 CH-Receiver
Four channel optical isolated receiver card (accepts up to four 
transmitters), 1800 MB RAM (225 MS/ch)
Note: Maximum sample rate on all channels is 25 MS/s when 
mixing both 25 MS/s and 100 MS/s transmitters on a single 
receiver.
1-G030-2Order no.
1-KAB277-10
1-KAB277-20
1-KAB277-50
1-KAB277-100
Fiber cable standard MM LC-SCRJ 50m
Fiber cable standard MM LC-SCRJ 100m
Type
Fiber cable standard MM LC-SCRJ 10m
Fiber cable standard MM LC-SCRJ 20m
KAB2771-KAB278-10
1-KAB278-20
1-KAB278-50
1-KAB278-100
1-KAB278-150
1-KAB278-300
Fiber cable heavy duty MM LC-SCRJ 10m
Fiber cable heavy duty MM LC-SCRJ 50m
Fiber cable heavy duty MM LC-SCRJ 100m
Fiber cable heavy duty MM LC-SCRJ 150m
Fiber cable heavy duty MM LC-SCRJ 300m
KAB278
Fiber cable heavy duty MM LC-SCRJ 20m
Order no. Type1-KAB279-20
1-KAB279-50
KAB279
Type Order no.
Fiber cable heavy duty MM SCRJ-SCRJ 50m
Fiber cable heavy duty MM SCRJ-SCRJ 20mG033
1-G034-2 G034
Type Order no.
10 bay Li-ion battery charger
Li-ion SM202 Battery only
Li-ion 10 bay battery charger for 6600HV and ISOBE5600t batteries, 
accepts 10 batteries without removing the carrier
Spare rechargeable Li-ion SM202 battery unit for 6600HV and 
1-G033-2Order no.
GN114 7600 Isolated Digitizer Subsystem 100 MS/s
7600 Isolated Digitizer Subsystem for system integration; 
100MS/s, 14 bit; extended temperature range, shock and vibration 
specifications; single mode fiber optical transmission to receiver card 
(requires ? of 7600 receiver); 
DC powered; no power supply provided, no power supply available as 
cost option.
1-GN114-2
TypeOrder no.
7600 FO Receiver card 1-GN402-2
Type
GN402
7600 fiber optic receiver card; for 4 channels; 1800 MB RAM 
(900 MS/card); Single mode fiber optical transmission; analog monitor 
output per channel; only compatible with 7600 Isolated DigitizerOrder no.
KAB288
1-KAB288-50 
1-KAB288-10
1-KAB288-2  Fiber cable standard SM LC-LC 2m
Fiber cable standard SM LC-LC 10m
Fiber cable standard SM LC-LC 20m
Type
Fiber cable standard SM LC-LC 50m
1-KAB288-20
1-KAB288-100 Fiber cable standard SM LC-LC 100mOrder no.
KAB289
Fiber cable heavy duty SM LC-LC 150m
Fiber cable heavy duty SM LC-LC 100m
Fiber cable heavy duty SM LC-LC 50m
1-KAB289-150
1-KAB289-10
1-KAB289-100
Fiber cable heavy duty SM LC-LC 20m
Fiber cable heavy duty SM LC-LC 10m
Type
Fiber cable heavy duty SM LC-LC 300m
1-KAB289-20
1-KAB289-50
1-KAB289-3001-GENIS-1TM-2 
ISOBE5600tm Transmitter MV
Type Order no.
4ch Receiver
GENIS-1T 1 ch Transmitter 1-GENIS-1T-2
ISOBE5600t transmitter HV, 100 MS/s, 14 bit,  25 MHz, one Li Ion 
battery, LC connector, 2nd empty battery slot
GENIS-4R
ISOBE5600r receiver, 4 channels, 4 x LC in, 4 x BNC out, LCD display 
for channel setup, overall system BW of transmitter and analog-out 20 
MHz
1-GENIS-4R-2
Type Order no.
ISOBE5600tm transmitter MV, 100 MS/s, 14 bit,  25 MHz, built-in 
power supply with 1.8 kV RMS isolation, LC connector
1 ch Transmitter
Type Order no.
ISOBE5600r Receiver
GENIS-1TMGENIS-4M
Order no. Type
ISOBE5600m receiver with memory, 64 MB RAM (8 MS/ch), 
4 channels, 4 x LC in, 4 x BNC out, LCD display for channel setup, 
overall system BW depending on signal path *) 
4ch Receiver 1-GENIS-4M-2Order no.
Fiber cable standard MM LC-LC 3m
Fiber cable standard MM LC-LC 10m
Fiber cable standard MM LC-LC 20m
Fiber cable standard MM LC-LC 50m 1-KAB280-50
 1)  KAB281 has been replaced by KAB280
1-KAB280-10 
1-KAB280-20 
KAB280  1)  1-KAB280-3
Type
G301 1-G301-2 Li-ion SM202 Battery with carrier
Spare rechargeable Li-ion battery unit for 6600HV and ISOBE5600t 
(with carrier to be used as 2nd battery)
G034 1-G034-2
Spare rechargeable Li-ion SM202 battery unit for 6600HV and 
ISOBE5600t
Li-ion SM202 Battery only
ISOBE5600 Options and Accessories
Type Order no.
Li-ion 10 bay battery charger for 6600HV and ISOBE5600t batteries, accepts 
10 batteries without removing the carrier
2 bay  Li-ion battery charger
Li-ion two bay battery charger for 6600HV and ISOBE5600t batteries. 
Accepts two batteries without removing the carrier
G033 1-G033-2
G109
ISOBE5600 Battery Charger
Order no. Type
10 bay Li-ion battery charger
1-G109-2
Must order one or more sufficient for the number of batteries to be charged simultaneouslyImpulse Attenuator 50:1 for 6600HV and ISOBE5600t; contains two 
LEMO ERA.4S.250 input connectors,  Accepts 4S.250 series male 
plug as used by voltage dividers (eg. Haefely) and offers a parallel 
G045 Impulse Attenuator 1-G045-2 
Impulse Attenuator for 6600HV and ISOBE5600t
Type Order no.Order no.
Test Sequencer with 32 fiber-optic outputs. Fully programmable via 
Type
GENTS32
BE3200 - High Voltage / High Power Test Sequencer
The BE3200 Test Sequencer is a high speed controller that provides precise timing for the operation of devices used for testing in low vo
voltage and high power laboratories. All inputs and outputs are optically isolated by fiber-optic. Synchronization with an additional B
possible to achieve 128 outputs. Control software for the BE3200 is an option to the Perception Software.
BE3200 Test Sequencer Systems
32 Channel System 1-GENTS32-2
FE-560-IA-Isolation amplifier card, 5 ranges, +/-100 mV to +/-1 kV, 50 kHz bandwidth
KAB282 Test Leads 1-KAB282-1.5
GI110 1 kV Module 1-GI110-2 
Order no.
BE560 Input Module and Accessory
Type
FE-PE8 8-slot bench case for amplifiers.
Type
GENIA8p 1-GENIA8P-2
Order no.
8 Slot Frame
FE-PE17 16-slot bench case for amplifiers.
1-GENIA16P-2  GENIA16p 16 Slot Frame
GENIA16r 16 Slot Rack 1-GENIA16R-2
FE-PE17-RK 16-slot rack mountable mainframe for  amplifiers.
Insulated black/red lead set, 1.5 meters with safety-shrouded banana plugs and alligator clips. 1000V 
CAT II.G601
Test Sequencer with 64 fiber-optic outputs. Fully programmable via 
fiber-optic isolated bi-directional USB interface. 16-channel fiber-optic 
isolated start qualifier included. Needs Perception Sequencer Control 
option. 
GENTS64
Type
64 Channel System
G603 TTL to Light
G602
1-GENTS64-2
Order no.
BE3200 Options and Accessories
8 Ch ARM 1-G601-2
Eight channel start qualifier input card using fiber-optic inputs (not needed for new systems).
Light to TTL 1-G602-2
G604 Rack Mount
10 meter single fiber-optic with light-to-TTL conversion output, requires DC power.
10 meter single fiber-optic with TTL-to-light conversion output, requires DC power.
Rack mount assembly.
1-G604-2 
1-G603-2 
GEN DAQ standard plastic optical simplex Multi Mode 1mm cable. 0.22dB/m loss,  HFBR4503Z-
KAB283 Fiber cable POF MM HFBR-HFBR 10m 1-KAB283-10G910 Probe Tip Adapters 1-G910-2
Probe tip adapters with 4 mm safety-shrouded banana plugs. Includes tip and ground lead adapters 
Voltage Probe Accessories
Type Order no.
25 MHz, 1.4 kV pk, +/-2% accuracy, CMRR 80dB@50Hz, 60dB@20kHz
G909 x20/x200 Active Differential Probe 1-G909-2
Voltage Probe - Active Differential
Type Order no.
10…50 pF, 3 m cable, 20 kV DC, 14 kV AC rms, 40 kV peak, 100 MHz
G906 x1000 passive probe 1-G906-2
10…50 pF, 2 m cable, 2 kV AC rms, 3 kV DC incl AC pk, 300 MHz
G904 x100 passive probe 1-G904-2
G903 x100 passive probe 1-G903-2
7…45 pF, 1.2 m cable, 1000 V rms CAT II, 400 MHz 
7…75 pF, 3 m cable, 300 V CAT II (x10 mode), 100 MHz (x10 mode)
G902 x1 / x10 switchable passive probe 1-G902-2
G901
Type Order no.
x1 / x10 switchable passive probe 1-G901-2
Order no.
Voltage Probes - Passive Differential
Type
7…75 pF, 1.2 m cable, 300 V CAT II (x10 mode), 200 MHz (x10 mode)
3 m cable. 200 MHz, 300 V rms CAT II, 35-70 pF.
G907 x10 differential matched probe set 1-G907-2
15-35 pF, 3 m cable, 200 MHz, 300 V rms CAT II.
G915 x10 differential matched probe set 1-G915-2G914 AC current clamp M1V20-2
High accuracy AC current probe; 50 mA to 20 A; 30 Hz - 40 kHz; BNC output cable 2m.
1-G914-2
AC current probe; 100 mA to 1200 A AC rms; 1 Hz-100 kHz; BNC output cable 2m.

進口Eckel Sohn低價銷售

進口Eckel Sohn低價銷售

進口Eckel Sohn低價銷售