CMP電纜夾套(CMP Huron LDAL cable cleat)
上海頤品自動(dòng)化科技有限公司,:
CMP Huron cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914:2009 to ensure the securing and retention of cables, without sustaining damage to the cable(s).
The Huron range of cable cleats are fabricated from 5000 series aluminium and are available in 23 sizes to suit cable diameters 19mm to 128mm.
The Huron cable cleat has three M10 fixing clearance holes within one base, allowing versatility to the installer during installation to use either one M10 bolt or two M10 bolts, and is designed to enable the product to be secured to a variety of mounting surfaces. The Huron cable cleats hinge opens fully allowing the cables to be easily placed within the cable cleat to aid the installer before closing and securing via the mouth piece bolt.
The Huron cable cleats come with Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free (LSF) liners as standard, helping to restrain the cable(s) within vertical applications, This provides a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cables occur, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions.
- Third party certification to IEC 61914:2009
- 5000 series aluminium
- 19 – 128mm in 23 sizes for trefoil formation / application
- Short circuit rating of 84kA peak fault
- Operating temperature -50°C to +60°C
- Low Smoke & Fume (LFS), Zero Halogen (LS0H) and Phosphorus Free as standard
- Combined single (M10) or two bolt (M10) fixing design
Short Circuit Testing to IEC 61914:2009 - Clause 9.5 | |
Trefoil Formation | |
One short circuit (6.4.3) 300mm fixed cleat centres | Two short circuits (6.4.4) 300mm fixed cleat centres |
0.1 sec | 0.1 sec |
84kA Peak | 84kA Peak |
40.5kA RMS | 40.5kA RMS |
300mm CAT 1 Huron LDAL (0.1 sec) | |
Cable OD (mm) | Peak kA |
36 | 84.0 |
38 | 86.3 |
43 | 91.8 |
59 | 107.5 |
65 | 112.9 |
PRODUCT SELECTION TABLE
CLICK HERE TO VIEW TECHNICAL ILLUSTRATION
TECHNICAL ILLUSTRATION
Showing: Imperial Metric
Huron Part No. | Cable Ø Range Take (mm) | Dimensions (mm) | Weight (g) | |||||
W | H | D | P | Fixing Hole Ø | ||||
D1 | D2 | |||||||
LDAL019023 | 19-23 | 100.0 | 87.0 | 54.0 | 25.0 | 2 x M10 | 1 x M10 | 213 |
LDAL023028 | 23-28 | 104.0 | 88.0 | 54.0 | 25.0 | 2 x M10 | 1 x M10 | 235 |
LDAL027032 | 27-32 | 106.0 | 97.0 | 54.0 | 25.0 | 2 x M10 | 1 x M10 | 242 |
LDAL030035 | 30-35 | 108.0 | 103.0 | 54.0 | 25.0 | 2 x M10 | 1 x M10 | 248 |
LDAL033038 | 33-38 | 110.0 | 107.0 | 54.0 | 25.0 | 2 x M10 | 1 x M10 | 251 |
LDAL036042 | 36-42 | 132.0 | 108.0 | 54.0 | 50.0 | 2 x M10 | 1 x M10 | 295 |
LDAL040046 | 40-46 | 134.0 | 113.0 | 54.0 | 50.0 | 2 x M10 | 1 x M10 | 302 |
LDAL044050 | 44-50 | 136.0 | 121.0 | 54.0 | 50.0 | 2 x M10 | 1 x M10 | 309 |
LDAL048055 | 48-55 | 138.0 | 127.0 | 54.0 | 50.0 | 2 x M10 | 1 x M10 | 320 |
LDAL051058 | 51-58 | 140.0 | 130.0 | 54.0 | 50.0 | 2 x M10 | 1 x M10 | 326 |
LDAL055062 | 55-62 | 157.0 | 138.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 363 |
LDAL059066 | 59-66 | 157.0 | 145.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 371 |
LDAL063070 | 63-70 | 160.0 | 152.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 378 |
LDAL067074 | 67-74 | 163.0 | 160.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 386 |
LDAL071078 | 71-78 | 168.0 | 167.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 395 |
LDAL074082 | 74-82 | 190.0 | 175.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 444 |
LDAL077085 | 77-85 | 192.0 | 180.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 450 |
LDAL082088 | 82-88 | 193.0 | 186.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 455 |
LDAL088096 | 88-96 | 202.0 | 201.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 472 |
LDAL096103 | 96-103 | 214.0 | 215.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 486 |
LDAL103111 | 103-111 | 237.0 | 229.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 545 |
LDAL111119 | 111-119 | 248.0 | 244.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 561 |
LDAL119128 | 119-128 | 265.0 | 260.0 | 54.0 | 75.0 | 2 x M10 | 1 x M10 | 591 |
中國區(qū)分銷商:
上海頤品自動(dòng)化科技有限公司
Shanghai Epin Automation Co.,Ltd.
Website:www.epinautomation。。com
:sales@epinautomation.com
*:
因?yàn)閷I(yè),所以放心!