Hawke防爆格蘭（Hawke 153/X Cable Gland/Connector)
Hawke防爆格蘭（Hawke 153/X Cable Gland/Connector)
Hawke防爆格蘭（Hawke 153/X Cable Gland/Connector)
上海頤品自動(dòng)化
Hawke153/X Cable Gland/Connector
Application
Outdoor or indoor use.
For use with armoured marine shipboard jacketed or non-jacketed cable.
Ordering Format [ Gland Type / Size / Male Thread / Female Thread / Material / Options ]
Example without options: 153 / CX / 1" NPT / Brass
Example with alternative seal option: 153 / CX / 1" NPT / Brass / S
Features
Provides armour clamping for marine shipboard cable.
Provides a seal on the cables inner jacket.
Provides an outer deluge seal to prevent moisture ingress to the cable armour and enclosure. Deluge seal is coloured black to indicate general purpose product.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer jacket.
Materials & Finishes
The 153/X cable gland/connector is manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminum. Brass NPT entries are nickel plated as standard.
Technical Data
- UL listed for use in wet locations.
- UL Listing No:
E218332. - Construction and Test Standards:
UL 514B. - Ingress Protection:
IP66, IP67 and IP68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X. - Deluge Protection to:
DTS01 - Operating Temperature Range:
-50°C to 60°C - Assembly Instruction Sheet:
AI 341.
| CABLE GLAND/CONNECTOR SELECTION TABLE | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size Ref. | Entry Thread Size | Cable Acceptance Details | ‘G’ Compressed Length | Hexagon Dimensions | |||||||||
| ‘A’ Inner Jacket | ‘B’ Outer Jacket | ‘C’ | |||||||||||
| NPT | Metric * | Standard Seal | Alternative Seal (S) | Across Flats | Across Corners | ||||||||
| Standard | Option | Min. | Max. | Min. | Max. | Min. | Max. | Braid | |||||
| Os | ½" | - | M20 ‡ | 0.12" | 0.31" | - | - | 0.22" | 0.47" | 0.008"/0.013" | 2.04" | 0.94" | 1.04" |
| O | ½" | - | M20 ‡ | 0.30" | 0.46" | - | - | 0.37" | 0.63" | 0.008"/0.013" | 2.04" | 0.94" | 1.04" |
| A | ½" | ¾" | M20 | 0.44" | 0.56" | 0.34" | 0.52" | 0.49" | 0.81" | 0.008"/0.013" | 2.08" | 1.18" | 1.28" |
| B | ¾" | 1" | M25 | 0.52" | 0.79" | 0.38" | 0.60" | 0.66" | 1.02" | 0.008"/0.013" | 2.74" | 1.42" | 1.55" |
| C | 1" | 1¼" | M32 | 0.75" | 1.04" | 0.61" | 0.83" | 0.87" | 1.30" | 0.008"/0.013" | 2.52" | 1.81" | 1.98" |
| C2 | 1¼" | 1½" | M40 | 0.99" | 1.27" | 0.87" | 1.10" | 1.10" | 1.61" | 0.008"/0.013" | 2.69" | 2.17" | 2.38" |
| D | 2" | 1½" | M50 | 1.24" | 1.74"/1.67" † | 1.09" | 1.37" | 1.42" | 2.07" | 0.008"/0.013" | 3.11" | 2.56" | 2.78" |
| E | 2½" | 2" | M63 | 1.68" | 2.21"/2.14" † | 1.54" | 1.83" | 1.81" | 2.57" | 0.008"/0.013" | 3.10" | 3.15" | 3.46" |
| F | 3" | 2½" | M75 | 2.15" | 2.68"/2.57" † | 1.91" | 2.29" | 2.24" | 3.07" | 0.008"/0.013" | 3.29" | 3.78" | 4.09" |
| H | 3½" | 3" | M90 | 2.64" | 3.06" | - | - | 2.96" | 3.52" | 0.008"/0.013" | 4.80" | 4.53" | 5.23" |
| All dimensions in inches (except*). Os - F size metric entry threads are 1.5mm pitch as standard with 15mm length of thread. For H size Cable Glands and above, a 2mm pitch is supplied as standard with a 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering. † Smaller value is applicable when selecting the standard NPT entry thread. ‡ Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner jacket diameter is 0.43". | |||||||||||||
